Thèse de doctorat : PHYSIQUE : Metz : 1999. / 1999METZ022S. 80 ref.

Reproduction de : Thèse doctorat : Optique et milieux dilués : Reims : 2008. / Titre provenant de l'écran titre. Bibliogr. p. 151-162.

Thesis (M.S.)--Tennessee Technological University, 2009. / Title from title page screen (viewed on Feb. 9, 2010). Bibliography: leaves 102-108.

There are a growing number of ultra-wideband applications, which involve the radiation or reception of electromagnetic signals over frequency bandwidths ranging from 1.3:1 to over 10:1. In the design of antennas for ultra-wideband systems, many design objectives must be considered, including impedance matching, radiation efficiency, radiation pattern stability, size, and possibly impulse response. Given the very wide bandwidths considered, it can be challenging to meet all objectives simultaneously, and optimization techniques are useful to achieve a reasonable compromise between objectives. In this dissertation, multi-objective Genetic Algorithm (GA) optimization is used to design ultra-wideband antennas for use in wireless communications and low frequency radio astronomy. GA optimization is first applied to the design of ultra-wide bandwidth planar monopole antennas, which exhibit a narrow-band frequency notch in order to mitigate interference with co-located radio systems. The GA optimizer uses a weighted sum cost function related to impedance matching and radiation patterns at frequencies within both the wide operating band and the narrow notch band to improve antenna performance. A two-dimensional matrix chromosome is used in the GA to represent a wide-range on planar element shapes. It is shown that the GA generates antenna designs which exhibit wideband performance equal to traditional band-notched designs, but have improved azimuth plane radiation pattern symmetry, which widens the effective notch bandwidth. Pareto GA optimization is then applied to the design of planar dipole antenna elements operating over a ground plane for use in a low frequency radio telescope array. The objectives considered include Galactic background or "sky noise reception level, and radiation patterns over the operating band of 20 to 80 MHz. It is demonstrated that the Pareto GA approach generates a set of designs, which exhibit a wide range of trade-offs between the two design objectives, and satisfy all applied geometrical constraints. Multiple GA executions are performed to determine how antenna performance trade-offs are affected by different geometrical constraint values, feed impedance values, radiating element shapes and orientations, and ground conditions. In a follow-up to the previous study, the effects of mutual coupling in a low frequency radio telescope array are considered. It is first shown that a simple receive-based definition of coupling between two antennas can be used to design antenna elements which exhibit reduced mutual coupling effects when operated in a large phased array. This result is utilized in order to perform Pareto GA optimization of wire frame bow-tie dipole elements in terms of mutual coupling, as well as sky noise response and radiation patterns over the 20 to 80 MHz band. The GA generates a set of designs that span a wide range of objective values. The results are analyzed to understand the trade-offs that may be made between the three objectives. / text

Σκοπός αυτής της διπλωματικής εργασίας είναι η μελέτη, σχεδίαση και εξομοίωση τυπωμένων υπερευρυζωνικών κεραιών, κατάλληλων για χρήση σε ασύρματα δίκτυα προσωπικού χώρου. Στο πρώτο κεφάλαιο, ορίζονται βασικές έννοιες της θεωρίας κεραιών που είναι απαραίτητες για την κατανόηση των κεφαλαίων που ακολουθούν. Επιπλέον, γίνεται μια μικρή αναφορά στο πρόγραμμα ADS Momentum που χρησιμοποιήσαμε κατά την εξομοίωση των κεραιών. Στο δεύτερο κεφάλαιο, παρουσιάζονται τα ιδιαίτερα χαρακτηριστικά, η ιστορική εξέλιξη, τα πλεονεκτήματα καθώς και οι σημαντικότερες εφαρμογές της υπερευρυζωνικής τεχνολογίας Στο τρίτο κεφάλαιο, περιγράφονται οι επιθυμητές ιδιότητες των υπερευρυζωνικών κεραιών, κάποιες τεχνικές επίτευξης προσαρμογής σε μεγαλύτερο εύρος συχνοτήτων και παράμετροι βέλτιστου σχεδιασμού των στοιχείων. Εν συνεχεία, γίνεται αναφορά σε όλες τις κατηγορίες υπερευρυζωνικών κεραιών και τέλος παρατίθενται παραδείγματα για κάθε μία από τις τρεις κατηγορίες τυπωμένων κεραιών που θα εξετάσουμε. Στο τέταρτο κεφάλαιο, μελετώνται οι μονοπολικές τυπωμένες υπερευρυζωνικές κεραίες. Για τον σκοπό αυτό σχεδιάστηκαν και εξομοιώθηκαν δύο μονοπολικές κεραίες κυκλικού δίσκου τροφοδοτούμενες, η πρώτη από μικροταινιακή γραμμή και η δεύτερη από ομοεπίπεδο κυματοδηγό. Στο πέμπτο κεφάλαιο, μελετώνται οι διπολικές τυπωμένες υπερευρυζωνικές κεραίες. Για τον σκοπό αυτό σχεδιάστηκε και εξομοιώθηκε η δίπλευρη τυπωμένη κεραία παπιγιόν αλλά και η τυπωμένη ελλειπτική διπολική κεραία. Στο έκτο κεφάλαιο, μελετώνται οι τυπωμένες κεραίες σχισμής. Για τον σκοπό αυτό σχεδιάστηκαν και εξομοιώθηκαν δύο ελλειπτικές κεραίες σχισμής τροφοδοτούμενες η πρώτη από μικροταινιακή γραμμή και η δεύτερη από ομοεπίπεδο κυματοδηγό. Επιπλέον οι γραμμές μεταφοράς των κεραιών καταλήγουν σε stub διαφορετικού σχήματος. Στο έβδομο, τέλος, κεφάλαιο γίνεται μια συνοπτική παρουσίαση των αποτελεσμάτων, ενώ παρατίθενται συμπεράσματα και προτάσεις για μελλοντική ενασχόληση πάνω στο θέμα των τυπωμένων υπερευρυζωνικών κεραιών. / The present diploma thesis will focus on the study, design and simulation of printed Ultrawideband antennas. These antennas are suitable for high data rate wireless personal area networks. The first chapter includes key definitions of antenna theory. Moreover, the program ADS Momentum that was used during the simulations is presented. In the second chapter, we present the key attributes, the advancement, the advantages and the most crucial applications of UWB technology. The third chapter depicts the desirable attributes of UWB antennas. In addition, some common matching, and element design techniques are presented. Furthermore, Ultrawideband antenna categories are introduced. Finally, some interesting examples of printed Ultrawideband antennas are mentioned. In the fourth chapter, printed UWB monopole antennas are being studied. For this purpose two printed circular disc monopole antennas were designed and simulated. The former fed by a microstrip line and the latter by a coplanar waveguide. In the fifth chapter, printed UWB dipole antennas are being studied. A double sided printed bow tie antenna and an elliptical dipole antenna were designed and simulated. In the sixth chapter, printed UWB slot antennas are being studied. For this purpose two printed elliptical slot antennas were designed and simulated. The former fed by a microstrip line and the latter by a coplanar waveguide. Finally, the seventh chapter includes a comparison of the simulated antennas along with conclusions and proposed future work.

Ultra wideband (UWB) systems have the potential for high data rate applications such as high-definition video streaming, high speed data transfer, etc. Recently, WiMedia based UWB evaluation systems and commercial products are available from industry. In order to understand the true performance of the WiMedia UWB system, it is important to study its characteristics from mathematical models and practical measurement tests. One of the key objectives of this thesis is to determine the important parameters in the path loss model based on the measurement results from the intended environments. Our focus is on residential environments including office buildings and houses, where intensive measurements are performed from various layers of a network (e.g. physical layer, packet level and application level). The results show that the WiMedia UWB system is fully capable of handling different high rate applications in residential networks. Another goal of this thesis is to propose a medium access control (MAC) protocol design tailored to high rate residential UWB wireless networks. The proposed multiband distributed MAC design utilizes the unique capabilities of UWB technology and the environment characteristics. We elaborate the design details and build a discrete event simulation program for performance evaluation purpose. By evaluating from both theoretical analysis and simulation, we show that the proposed MAC design has substantial advantage over single channel MAC in a high rate residential UWB wireless network. / Graduate

No description available.

An ultra-wideband (UWB) spatial filter is proposed to mitigate multipath effects in a one-way, one-dimensional time-of-arrival (TOA) localization system for use inside a tunnel. The spatial filter is a weighted array of judiciously placed antennas and it exploits the fact that electromagnetic waves propagate as modes in a tunnel by selectively extracting these mode(s). The design of several spatial filters is presented alongside vigorous analyses to characterize the localization performance afforded by them in a noisy environment. The filters are evaluated using data from an analytical equation waveguide model, a ray tracer model and measurements. These spatial filters deliver accurate localization estimates across distance and well-designed filters can operate at higher SNRs and further distances than single sensors. Insights into successful spatial filter design are provided and this spatial filtering technique has created a new branch of multipath-aware localization systems.

156 leaves : tables, graphs ; 30 cm. / Title page, contents and abstract only. The complete thesis in print form is available from the University Library. / Thesis (Ph.D.)--University of Adelaide, Dept. of Physics, 1980

Thesis (Ph.D.) -- University of Adelaide, Dept. of Physics, 1980.