Spelling suggestions: "subject:"ultrathin thinfilm filter"" "subject:"ultrathin thinkfilm filter""
1 |
Bidirectional Transceiver Modules on the Silicon Bench using Ultra-thin Thin-film Filter and Optical FibersYang, Chia-chin 13 June 2005 (has links)
The primary target of this paper is to fabricate bidirectional transceiver modules based on single mode fiber (SMF) and ultra-thin thin-film filter (TFF). Two major components, namely, SMF and ultra-thin TFF are hybrid integrated on the silicon bench using V-groove and U-groove techniques. A 1310 nm wavelength light was launched into the input SMF of the module. After passing through the filter, the light was received by the output SMF of the module. On the other hand, a 1550 nm wavelength light input to the SMF is reflected by the filter and collected by the output multimode fiber (MMF).
Transceiver modules using two different fiber structures were fabricated. The first kind of the module uses standard SMF for 1310 nm light transmission. The insertion loss of the module for the 1310 nm wavelength light was 5.66 dB. In the second kind of the module lens fibers were used to replace the standard SMF. The insertion loss for the 1310 nm wavelength light was reduced to 0.98 dB. A reduction of 4.6 dB was achieved. For both modules, the insertion loss for the 1550 nm wavelength light reflected from the filter was around 0.5 dB.
|
2 |
Triplexer Transceiver Modules on the Silicon Bench using Ultra-thin Thin-film Filter and Optical FibersChen, Yi-ting 23 June 2006 (has links)
The primary target of this paper is to fabricate triplexer modules based on Si-bench technology. The triplexer modules were formed by hybrid integration of single mode lensed fibers and ultra-thin thin-film filters (TFF) on silicon bench as using V-groove and U-groove techniques. The output light at 1.31 µm was launched into the input lensed fiber of the module. After passing through two filters, the light was received by the output lensed fiber of the module. The insertion loss of the module at the 1.31 µm light was 1.25 dB. On the other hand, incoming lights at 1.49µm and 1.55µm were received from the output lensed fiber. Lights at 1.49µm will pass through the first filter, and be reflected by the second filter, and eventually be collected into the second multimode fiber. The insertion loss of the module at the 1.49 µm light was 1.14 dB. The 1.55µm wavelength lights received at the lensed fiber are reflected by the first filter and collected by the first multimode fiber. The insertion loss of the module at the 1.55 µm light was 0.68 dB.
|
Page generated in 0.068 seconds