This thesis discusses the design and construction of a Near-field Scanning Optical Microscope (NSOM). Basic principles of operation, the characteristics of the hardware components, and the control software are discussed. A unique method of controlling the position of the probe is developed, and scans of a diffraction grating are presented. We show the influence that the surface topology and reflectivity and the interference of direct and reflected light have on the images. A second design of the instrument, for use in a vacuum chamber and with a flexure stage for lateral motion, is accomplished. / text

Inductively-Coupled Plasma Optical Emission Spectrometry (ICP-OES) is evaluated as a method for the selective determination of several non-metals which emit light in the Vacuum Ultraviolet (VUV) region of the spectrum. In this study, emphasis is placed on those elements which are totally unobservable with standard techniques or have very weak lines in the UV-VIS region of the spectrum. The sensitivity and accuracy of the apparatus and methods devised allows the determination of empirical formulas of gas chromatographic effluents. The results of this study indicate that the background emission of the ICP in the VUV is low level and nearly constant over the entire spectral region investigated (125 - 185 nm.). Promising analytical lines for oxygen, nitrogen, chlorine, bromine, and carbon are also observed in this region. A progression of four experimental configurations were constructed, employing a purged optical path and a unique coolant tube design. The last of these configurations has the capability of spatial resolution of individual portions of the discharge so that emission maps and profiles could be constructed. The results of the maps generated indicate that the region of highest emission intensity is always centered in the discharge. However, the vertical position of this region is found to be dependent upon r.f. power and argon flow rates. Detection limits in the low nanogram region are observed for each non-metal. The dynamic range for each element is in excess of 10⁴ and the selectivity ratio versus carbon is above 100 in each case. A method was developed for determining the elemental composition of the effluents of a GC. Using internal standards, the method is independent of the weight of each component eluted thus sampling errors are eliminated. The average relative errors in multielement analysis are 0.89%, 0.75%, 2.1%, 0.55%, and 0.64% for the percent carbon, oxygen, nitrogen, chlorine, and bromine, respectively.

No description available.

Routes to N-amino heterocycles were reviewed and findings applied to generate flash vacuum pyrolysis (FVP) precursors of two types - ketene generators and azol-1-yl radical generators. N-Amino heterocycles can be used as nitrogen radical generators, the N-N bond being homolytically cleaved at furnace temperatures of approximately 850 °C. A number of 2-substituted benzimidazoles were synthesised and subsequently Naminated. The 2-arylbenzimidazole precursors 1-amino-2-(2-methylphenyl)-1Hbenzimidazole and 1-amino-2-(2-ethylphenyl)-1H-benzimidazole were synthesised and subjected to FVP. The hydrogen transfer processes of the resulting azol-1-yl radicals were investigated. Pyrolysis of 1-amino-2-(2-methylphenyl)-1Hbenzimidazole resulted in three products; 2-(2-methylphenyl)-1H-benzimdazole, 11H-benzo[4,5]imidazo[1,2-a]isoindole and 1-(2-methylphenyl)-1Hbenzo[ d]imidazol-2-amine. Pyrolysis of 1-amino-2-(2-ethylphenyl)-1Hbenzimidazole resulted in five products, four of which have been successfully isolated and identified as 2-(2-ethylphenyl)-1H-benzimidazole, 5,6- dihydrobenzo[4,5]imidazo[2,1-a]isoquinoline, 1-(2-ethylphenyl)-1Hbenzo[ d]imidazol-2-amine and 11-methyl-11H-benzo[4,5]imidazo[2,1-a]isoindole. The mechanism of formation of most products is initiated by hydrogen atom transfer to the azol-1-yl radical position. N-Aminopyrazole was reacted with 5-methoxymethylene-2,2-dimethyl-1,3-dioxane- 4,6-dione to form the corresponding 5-(N-aminopyrazolyl)methylene derivative, which, when subjected to FVP, eliminates acetone and carbon dioxide to form a methyleneketene. This subsequently undergoes a [1,3]-hydrogen shift giving an imidoylketene which can collapse onto the neighbouring nitrogen atom forming pyrazolo[1,2-a][1,2,3]triazin-5-ium-4-olate (a novel heterocyclic mesomeric betaine system) or cyclise onto the adjacent carbon atom to yield a pyrazolopyridazinone. On variation of the furnace temperature it was apparent the former forms at relatively moderate temperatures (~500 °C) whereas the latter begins to predominate as the furnace temperature increases (~700 °C). The relationship between these kinetic and thermodynamic products was modelled using DFT calculations. By using substituted pyrazole precursors, substituents could be incorporated into all three available positions around the pyrazole ring. Using substituted acrylic esters as alternative imidoylketene generators, substituents could also be incorporated into both available positions in the pyridazinone ring. All corresponding betaine and pyrazolopyridazinone products were isolated and characterised.

This thesis describes an experimental study of high intensity, pulsed, optically pumped, far-infrared (FIR) lasers. The work was motivated by the need for a radiation source for the measurement of the ion temperature in magnetically confined, high temperature plasmas (e.g. tokamak plasmas), using Thomson scattering. Constraints imposed by the plasma parameters, the scattering geometry and available detector sensitivities lead to the requirement of a radiation source wavelength between 30μm and 1mm and a source power . 1 MW in a bandwidth 60 MHz. Results are presented for a 496μm, 500 watt, methyl fluoride (CH₃F) cavity laser, with a bandwidth of and < 30MHz, which was optically pumped by a 9.55μm CO₂ laser. Results are also presented for an optically excited mirrorless, super-radiant, CH₃F laser, which generated over 0.6MW of FIR radiation within a bandwidth of about 300MHz. The performance of this laser has also been simulated by a computer model, which allows the optimum operating parameters to be predicted. An assembly constructed on the principle of the injection laser, in which low power narrow-band oscillator radiation is used to control the output of a super-radiant system, has been used to generate 250 kW of 496 andmu;m radiation, with a bandwidth of < 60 MHz. Investigations of the FIR output from heavy water vapour (D₂O) in a super-radiant laser assembly, optically excited by several different CO₂ laser wavelengths, have resulted in the generation of 60 ns (FWHM) pulses of FIR radiation with average powers of 1.3, 9.2 and 15.8MW, at wavelengths of 385, 119 and 66μm, respectively. All these lasers were found to have a higher CO₂ to FIR photon conversion efficiency than the 496μm CH₃F laser. In addition, the energy level spacing in D₂O is such that the molecule can generate narrow bandwidth radiation more readily than the CH₃F molecule. From this work it is concluded that an injection laser assembly, similar to that used with CH₃F, but containing D₂O vapour, optically pumped by a 9.26μm CO₂ laser and generating several megawatts of 385μm radiation, would satisfy the source requirements mentioned above.

This thesis is a study of the design and testing of a positive ion accelerator and necessary vacuum system.

Master of Science / Food Science / Terry Houser / The objective of this research was to evaluate the effect of natural nitrites on objective color of vacuum packaged fresh pork. Sections of longissimus dorsi muscle (approximately 18 cm) were injected with solutions containing 0, 3, 6, 9 or 12 ppm of natural nitrite. Sections were sliced into chops (2.54 cm) and individually vacuum packaged. Raw chop surface L*, a* and b* values were measured at 1, 5, 15 and 30 days post packaging. At 1, 15 and 30 days post packaging chops were cooked and surface L*, a* and b* values were measured. Hue and Chroma values were calculated for all color measurements. Linear and quadratic contrasts were evaluated on treatments for all measured and calculated color values. A linear (P<0.05) increase was detected on the L* values for days of vacuum storage treatment, all other raw color measurements and calculations for levels of natural nitrite and days of vacuum package storage were found to be quadratic (P<0.05). Cooked L* and Hue values for days of vacuum storage were found to decrease linearly (P<0.05), all other days of storage and levels of nitrite treatments were found to be quadratic (P<0.05) in relationship to the measured and calculated cooked color values. All raw chops containing nitrite had higher a* and Chroma values at all evaluation days than those containing no added nitrite. Raw chops containing nitrite had lower L*, higher b* and Hue values than the 0 ppm chops (P<0.05). Raw chops containing natural nitrite were darker, redder, more yellow and more intense in color than those without nitrite. The longer the chops were vacuum packaged and then cooked, the lower the L* values were (P<0.05). Cooked chops containing nitrite were redder, less yellow and lower in Hue and Chroma values than cooked chops with no added nitrite P(<0.05). These results indicate that low levels of nitrite can alter fresh and cooked pork color during vacuum storage. To balance the increased redness and darkness of the raw chops with the increased redness of the cooked chops, 3 ppm of natural nitrite was found to be the optimal treatment.

This master thesis provides an overview of the paper machine with focus on the forming section. The forming section is the first part in the paper machine where the paper pulp is injected through a head box. The paper pulp contains about 99.5% of water and 0.5% fiber. The water as content is reduced by vacuum and gravity. The problem to be studied in this project is related to external rewetting. This is water going back to the paper web from the forming fabric after the dewatering zone. The dewatering is based on vacuum slots under the forming fabric. The vacuum slots absorb water from the soaked paper pulp through the forming fabric. External rewetting causes problem, hence the paper will have a higher dry content when leaving the forming section. The paper should have as low dry content as possible in the end of the forming section. Three different forming fabrics from Albany International were chosen for the project. The structures of the forming fabrics were two different double layers and one plain weave. The performance of the fabrics was studied by 4 different methods. The methods used were 2 different wicking tests, a vacuum dewatering trial and one foulard test. Also micro tomography was done to understand the structure of each design. The main test was a foulard test where the aim was to see in what way the rewetting got affected by different pores sizes. The results showed higher water content for the paper that was on top of the forming fabric with the larger pores.

O fenômeno de permeabilidade refere-se à capacidade com que um fluido é transportado através de um meio poroso, impulsionado por gradiente de pressão entre material e meio externo. Agentes de degradação são conduzidos ao interior de argamassas e concretos impelidos através desse tipo de fenômeno. Por isso, considera-se a permeabilidade como um dos principais parâmetros referentes à durabilidade e vida útil de materiais cimentíceos. Além disso, como esse tipo de avaliação está relacionada às condições estruturais dos vazios capilares de meios porosos, esse tipo de medida pode prover um indicativo das condições da estrutura porosa das argamassas no momento do ensaio, servindo ainda como método de controle de qualidade e avaliação dos processos de produção. Portanto, um novo procedimento de medida de permeabilidade ao ar, em regime de escoamento transiente, foi desenvolvido para avaliação de argamassas de revestimento através do método de vaccum-decay. O potencial do processo não se restringe apenas na determinação dos parâmetros clássicos de permeabilidade propostos por Henry Darcy, mas na avaliação das curvas de recuperação de pressão que fornecem um indicativo das condições microestruturais de diferentes estados da estrutura de meios porosos. Além disso, trata-se de um ensaio portátil, não destrutivo e de baixo custo de implementação para avaliação de argamassas de revestimento in situ. Para isto, neste trabalho foram avaliadas diferentes formulações de argamassas de revestimento tanto em ambiente laboratorial quanto in situ, em comparação ao método de Cembureau (referência), e se existe relação entre as duas diferentes condições apresentadas. A profundidade alcançada por esse tipo de ensaio superficial é uma dúvida recorrente deste e outros ensaios da mesma natureza, e por isso foi considerado no desenvolvimento do plano experimental. Ainda, as diferentes direções do fluxo de ar durante a medida podem influenciar as determinações das permeabilidades para diferentes configurações de experimentos realizados, e também foram considerados no desenvolvimento do método. / The phenomenon of permeability refers to the ability with which a fluid is transported through a porous medium, driven by pressure gradient between the material and the external environment. Degradation agents are conducted to the interior of mortar and concrete driven through such a phenomenon. Therefore, it is the permeability as a key parameters for durability and shelf life of cementitious materials. Moreover, as this type of evaluation is related to structural conditions of the empty capillary porous media, this type of measurement can provide an indication of the conditions of the porous structure of mortar at the time of trial, still serving as a method of quality control and evaluation production processes. Therefore, a new procedure for measuring air permeability in transient flow regime was developed for evaluation of mortar coating by the method of vacuum-decay. The potential of the process is not restricted only to the determination of the classical parameters of permeability proposed by Henry Darcy, but in assessing the recovery curve of pressure that provide a clear picture of states in different microstructural conditions of the structure of porous media. Moreover, it is a portable test, nondestructive and low cost of implementation for evaluation of mortar coating in situ. For this reason, this study evaluated different formulations of mortar coating in laboratory environment and in situ, compared to the Cembureau method (reference), and if there is a relationship between two different conditions presented. The depth reached by this type of test surface is a recurring question of this and other tests of the same nature, and so was considered in developing of this experimental plan. Still, the different directions of air flow during the measurement can influence the determination of permeability for different configurations of the experiments, and were also considered in developing the method.

É fato sabido que, de todas as interações fundamentais da Natureza que conhecemos, a gravitacional é a que acopla mais fracamente com a matéria. Isso sugere que na maior parte dos processos físicos a força gravitacional desempenha papel diminuto. Por outro lado, na Teoria Quântica de Campos é atribuído ao estado de vácuo uma rica estrutura, a qual é indispensável para uma descrição consistente da Natureza. No entanto, implicações experimentais diretas dessa estrutura são muito sutis e requerem sistemas cuidadosamente projetados para serem observadas, como é o caso do Efeito Casimir. À luz dos fatos mencionados acima, é de se esperar que na fusão minimamente consistente entre Gravitação e Mecânica Quântica, a chamada Teoria Quântica de Campos em Espaços-tempos Curvos, efeitos relacionados a perturbação do vácuo pelo campo gravitacional sejam muito difíceis de serem observados. De fato, a despeito de sua importância conceitual, o efeito de evaporação de buracos negros é praticamente impossível de ser observado para sistemas astrofísicos. No curso deste doutoramento, todavia, foi mostrado que essa crença é falsa e que é possível que existam situações em que a evolução bem comportada do espaço-tempo força a densidade de energia de vácuo a tornar-se dominante sobre a densidade de energia clássica que gera o espaço-tempo de fundo. Uma vez despertado, o vácuo passaria a dirigir a evolução do sistema gravitacional, o que poderia ter consequências inesperadas em contextos astrofísicos. Qualquer que seja seu destino, é razoável esperar que a retroação do vácuo aja sobre o sistema gravitacional de forma a cessar as instabilidades. Com essa simples observação é possível concluir que quando o vácuo adormece novamente processos de criação de partículas em profusão podem ser engendrados. / It is well known that the gravitational interaction is the weakest among the fundamental forces in Nature. This fact suggests that Gravity plays a minor part in the majority of physical process. On the other hand, in Quantum Field Theory a rich structure is attributed to the vacuum state, which is imperative for a consistent description of the more basic processes in Nature. Nevertheless, the direct experimental implications of this structure are very subtle and their observation requires specially designed systems, as in the case of the Casimir Effect. Therefore, it is reasonable to expect that effects related to the perturbation of the quantum vacuum by gravitational fields, described by the framework of Quantum Field Theory in Curved Space-times, would be hard to be observed. This is the case of the black hole evaporation effect. In spite of its conceptual importance, this effect is virtually impossible to be observed for astrophysical black holes. Notwithstanding, here it is argued that this belief is false and that there exist well-behaved space-time evolutions where the vacuum energy density of free quantum fields is forced by the very same background space-time to become dominant over the classical energy density. Once it has been awakened, the quantum vacuum would overrule the dynamics of the entire gravitational system, which may bear some unexpected astrophysical implications. Whatever turns out to be the fate of the system, it seems reasonable to conjecture that the vacuum backreaction will act in order to cease the quantum instabilities. Through this simple observation it is possible to conclude that when the vacuum falls dormant particles are released as consequence.