Thesis (PhD) - Swinburne University of Technology, School of Engineering and Science, 2008. / A thesis submitted for the degree of Doctor of Philosophy, School of Engineering and Science, Swinburne University of Technology, 2008. Typescript. Includes bibliographical references (p. 189-204).

This study is an investigation of the chemical vapor deposition (CVD) of aluminum and copper on fluoropolymer surfaces and the subsequent interfacial interactions.

The objective of this project is to establish a new technology to grow high quality GaN based material by nano selective area growth (NSAG). The motivation is to overcome the limit of the conventional growth method, which yield a high density of dislocation in the epitaxial layer. A low dislocation density in the epitaxial layer is crucial for high performance and high efficiency devices. This project focuses on growth and material characterization of GaN based nanostructures (nanodots and nanostripes) grown using the NSAG method that we developed. NSAG, with a precise control of diameter and position of nanostructures opens the door to new applications such as: 1) single photon source, 2) photonic crystal, 3) coalescence of high quality GaN template, and 4) novel nanodevices.

Thesis (M.S.)--University of Alabama at Birmingham, 2008. / Description based on contents viewed May 30, 2008; title from title screen. Includes bibliographical references (p. 50-51).

No description available.

The material and device characteristics of InGaN/GaN heterojunction bipolar transistors (HBTs) grown by metalorganic chemical vapor deposition are examined. Two structures grown on sapphire with different p-InxGa1-xN base-region compositions, xIn = 0.03 and 0.05, are presented in a comparative study. In a second experiment, NpN-GaN/InGaN/GaN HBTs are grown and fabricated on free-standing GaN (FS-GaN) and sapphire substrates to investigate the effect of dislocations on III-nitride HBT epitaxial structures. The performance characteristics of HBTs on FS-GaN with a 20×20 m2 emitter area exhibit a maximum collector-current density of ~12.3 kA/cm2, a D.C. current gain of ~90, and a maximum differential gain of ~120 without surface passivation. For the development of deep-ultraviolet optoelectronics, several various structures of optically-pumped lasers at 257, 246, and 243 nm are demonstrated on (0001) AlN substrates. The threshold-power density at room temperature was reduced to as low as 297 kW/cm2. The dominating polarization was measured to be transverse electric in all cases. InAlN material was developed to provide lattice matched, high-bandgap energy cladding layers for a III-N UV laser structure. This would alleviate strain and dislocation formation in the structure, and also mitigate the polarization charge. However, a gallium auto-doping mechanism was encountered which prevents the growth of pure ternary InAlN, resulting instead in quaternary InAlGaN. This phenomenon is quantitatively examined and its source is explored.