The aim of this diploma thesis is to draw up project documentation for new multifunctional building in the city of Vyškov. The discussed building is designed on flat terrain and has partial basement with four floors above ground. The basement contains technical facilities and storage area for building residents. The first floor contains commercial premises made of three stores: drugstore, flower shop and wine cellar. The second and third floor each contains two residential units. On the fourth floor is one spacious studio apartment.

The subject of the master's thesis is elaboration of the complete project design documentation of a administrative building, ready for implementation in the construction phase. The object is divided into four above-ground floors and one underground floor. It is divided into three blocks A, B, K and into three independent functional units. The prevailing part of building is administrative part, which is located in blocks A and B. In the basement there is a compound garage. Part of the building comprises of a service, a café, located and operated on the first floor above ground in block K. The individual blocks have separate entries and are without any mutal limitation to their independent operations. The building has a carrier system designed as a monolithic, reinforced concrete skeleton with two reinforced cores, placed on reinforced concrete feet. Ceramic fittings are slated for filling . The roof structure designed as a single-shell flat roof area, eventually vegetative. The facade is designed as ventilated with cement-bonded particle boards. Within the specialization is the solution of technical equipment, forced ventilation by means of air-conditioning system.

The dissertation named “Office building” is elaborated as a building documentation in agreement with the current standards and legal norms and acts. It is a two storey building and contains a maisonette section, is basementless with a flat roof and applying the combined constructional system. The building is constructed on the concrete base slab; vertical bearing structures are constructed of reinforced concrete and wooden pillars, the roof and ceiling bearing structures consist of wooden beams. The building is designed for administrative purposes and related activities. Walls are constructed of reinforced concrete, using sandwich wall system with wooden elements and there is a vegetative roof. The building is designed as low-energetic.

The subject of this thesis is the documentation of terraced houses with inner courtyard intended for housing. The object is located on the outskirts of Veverská Bítýška in the area of detached houses and apartment block. The building will be used for 32 households with the total capacity 128 people. The part of thesis was designing underground garage with capacity of 25 cars and 42 bicycles. The area of detached house is situated on a flat terrain. Houses A have two floors without the basement with garage in front of house. Every house has individual main entrance. The building is made of brick from ceramic blocks from the Heluz system with thermal insulation of the facade. Houses have a single-layer flat roof. Part B has two floors with basement where is situated garage. Entrance to this garage is from public garage. The building is made of brick from ceramic blocks from the Heluz system with thermal insulation of the facade. Underground walls are made of cast-in-place reinforced concrete. Houses have a single-layer flat roof. Public underground garage is separated from the another buildings. Main entrance to the garage is from the ramp. The building is made of cast-in-place reinforced concrete with external wall insulation system. The building has a vegetative roof which forms part of the courtyard.

The aim of the Diploma thesis is elaboration of a design documentation for execution of a wellness hotel. The building is operationally divided into two parts – part accommodation and wellness part. The accommodation part includes four above-ground floors and one under-ground floor. In the under-ground floor are situated garages. In the first above-ground floor is designed restaurant and in other above-ground floors are situated hotel rooms. Wellness part is designed with two above-ground floors and one under-ground floor. In the under-ground floor are situated garages. In the first above-ground is designed wellness, which includes relaxation pool, whirpool, five indoor saunas, three outdoor saunas, kneipp and relaxation rooms. In the second above ground floor are designed solariums, massages, beauty salon and hairdressing salon. The part of the floor is also café with large terrace. A roof above 2.NP is designed as vegetative with extensive grassing. A roof above 4.NP is designed as a one-layer flat roof with classical sequence of layers. The building is designed as prefabricated skelet. Filling masonry is from a POROTHERM system. Floor structure is designed from prestpressed panel SPIROLL.

The subject of this master’s thesis is elaboration of project documentation for building an " block of flats" according to the actual standards and norms given by law. The object has four storeys above the ground and one underground floor. Object consists of fourteen regular flats and one flat for immobile person. Object is built of brick construction system with ceilings based on the Spirol preloaded panels. Object has partially flat roof covered with vegetation and partially skew pult roof.

The subject of this thesis is to design a building with apartments in a high standard of living. The building will be located on sloping land currently accessible from the street Hybnerová in cadastral area of Silesian Ostrava. Construction, surrounding land and fence form a unified aesthetic and functional whole, reflecting the sloping nature of the site. White matter of structure grows continuously from the lowest point and produces fencing which spirals around the property and rise harmoniously into the building itself. Adjusted terrain of land creates platforms for individual gardens for each apartments and produces space for underground garage. The house is designed as a three-storey building with underground garage. The building will accommodate 5 residential units with terraces and technical and storage spaces within the basement. The building is oriented southwest and its location allows splitting the land to the eastern and western gardens. Southwest orientation uses the only unblocked view from the property. Continuously rising fence separates the building from surrounding buildings and offers plenty of privacy for the residents. Concrete fence has also security function.

No description available.

The aim of the diploma thesis is to elaborate project documentation of a new-build mixed-use building in Moravske Budejovice, in the cadastral area of Moravske Budejovice. The mixed-use building comprises a partial cellar and three floors above the ground. In the cellar, technical facilities and storage space for the residental part of the building can be found. The ground floor and the part of the first floor are designed for commercial premises, a hairdresser's, a florist's, a bookshop and a café. Residental unit consisting of three flats is located on the first and second floor. the building is made from 300 mm thick ceramic construction blocks with the external thermal insulation system. Ceiling construction is made of 250 mm thick concrete monolithic panels. Furthermore, the documentation deals with potable water, electric power and gas couplers, sewerage system, rainwater sewer and paved surface for pedestrians and motor vehicles. The thesis is elaborated as documentation for the building execution.

The new building of a university dormitory with workshops is the content of the presented thesis. The building consists of fifty-two beds for students’ accommodation with complete equipment in eight cells, three workshops and a technical support. This is a combination of reinforced concrete prefabricated skeleton and classical masonry building construction with insulation. The building has four floors. It is designed as seven towers with flat roofs, which protrude from a ground floor with a vegetative roof. Paved and parking areas are adjacent to the building. The project is designed into an urban area of Nový Jičín. Glass atrium and overall shape solution are the distinctive features of the proposal.