1 |
Modeling and Control of a Superimposed Steering SystemAvak, Bjoern 09 July 2004 (has links)
A superimposed steering system is the combination of a conventional steering system with an electric motor which is used to alter the steering angle imposed by the driver. The potential benefits are increased agility, automatic compensation for lateral wind forces and decreased braking distance (in combination with an electronic stability program). In this thesis we implement a model and a controller for a superimposed steering system thus achieving the first of these potential benefits.
The vehicle model is based on the single-track or bicycle model. Unlike most other publications, the motor model in this thesis goes down to the level of the electrical dynamics of the motor. The model is divided into three main modules (vehicle module, steering module and friction module) as well as several submodules to ensure easy adaptability.
The overall control objective consists of increasing vehicle agility by achieving a variable ratio between the steering wheel angle and the actual road wheel angle as a function vehicle velocity. We divide the controller into a torque and a current controller. The actual controller is derived in three steps starting from an analog torque controller as well as an analog current controller then moving to a digital torque controller. In doing so we use the model matching, feedback linearization and state feedback control techniques.
The model and the controller are evaluated using the parameters of a small truck and different road scenarios. Finally, the Validation Square technique is applied to assess the validity of the results.
|
2 |
MODELING AND ENERGY MANAGEMENT OF HYBRID ELECTRIC VEHICLESRISHIKESH MAHESH BAGWE (7480409) 17 October 2019 (has links)
<div>This thesis proposes an Adaptive Rule-Based Energy Management Strategy (ARBS EMS) for a parallel hybrid electric vehicle (P-HEV). The strategy can effciently be deployed online without the need for complete knowledge of the entire duty cycle in order to optimize fuel consumption. ARBS improves upon the established Preliminary Rule-Based Strategy (PRBS) which has been adopted in commercial vehicles. When compared to PRBS, the aim of ARBS is to maintain the battery State of Charge (SOC) which ensures the availability of the battery over extended distances. The proposed strategy prevents the engine from operating in highly ineffcient regions and reduces the total equivalent fuel consumption of the vehicle. Using an HEV model developed in Simulink, both the proposed ARBS and the established PRBS strategies are compared across eight short duty cycles and one long duty cycle with urban and highway characteristics. Compared to PRBS, the results show that, on average, a 1.19% improvement in the miles per gallon equivalent (MPGe) is obtained with ARBS when the battery initial SOC is 63% for short duty cycles. However, as opposed to PRBS, ARBS has the advantage of not requiring any prior knowledge of the engine efficiency maps in order to achieve optimal performance. This characteristics can help in the systematic aftermarket hybridization of heavy duty vehicles.</div>
|
3 |
Modeling And Optimization Of Hybrid Electric VehiclesOzden, Burak Samil 01 February 2013 (has links) (PDF)
The main goal of this thesis study is the optimization of the basic design parameters of hybrid electric vehicle drivetrain components to minimize fuel consumption and emission objectives, together with constraints derived from performance requirements. In order to generate a user friendly and flexible platform to model, select drivetrain components, simulate performance, and optimize parameters of series and parallel hybrid electric vehicles, a MATLAB based graphical user interface is designed. A basic sizing procedure for the internal combustion engine, electric motor, and battery is developed. Pre-defined control strategies are implemented for both types of hybrid configurations. To achieve better fuel consumption and emission values, while satisfying nonlinear performance constraints, multi-objective gradient based optimization procedure is carried out with user defined upper and lower bounds of optimization parameters. The optimization process is applied to a number of case studies and the results are evaluated by comparison with similar cases found in literature.
|
4 |
Practical Coordination of Multi-Vehicle Systems in FormationBayezit, Ismail January 2014 (has links)
This thesis considers the cooperation and coordination of multi vehicle systems cohesively in order to keep the formation geometry and provide the string stability. We first present the modeling of aerial and road vehicles representing different motion characteristics suitable for cooperative operations. Then, a set of three dimensional cohesive motion coordination and formation control schemes for teams of autonomous vehicles is proposed. The two main components of these schemes are i) platform free high level online trajectory generation algorithms and ii) individual trajectory tracking controllers. High level algorithms generate the desired trajectories for three dimensional leader-follower structured tight formations, and then distributed controllers provide the individual control of each agent for tracking the desired trajectories. The generic goal of the control scheme is to move the agents while maintaining the formation geometry. We propose a distributed control scheme to solve this problem utilizing the notions of graph rigidity and persistence as well as techniques of virtual target tracking and smooth switching. The distributed control scheme is developed by modeling the agent kinematics as a single-velocity integrator; nevertheless, extension to the cases with simplified kinematic and dynamic models of fixed-wing autonomous aerial vehicles and quadrotors is discussed. The cohesive cooperation in three dimensions is so beneficial for surveillance and reconnaissance activities with optimal geometries, operation security in military activities, more viable with autonomous flying, and future aeronautics aspects, such as fractionated spacecraft and tethered formation flying. We then focus on motion control task modeling for three dimensional agent kinematics and considering parametric uncertainties originated from inertial measurement noise. We design an adaptive controller to perform the three dimensional motion control task, paying attention to the parametric uncertainties, and employing a recently developed immersion and invariance based scheme. Next, the cooperative driving of road vehicles in a platoon and string stability concepts in one-dimensional traffic are discussed. Collaborative driving of commercial vehicles has significant advantages while platooning on highways, including increased road-capacity and reduced traffic congestion in daily traffic. Several companies in the automotive sector have started implementing driver assistance systems and adaptive cruise control (ACC) support, which enables implementation of high level cooperative algorithms with additional softwares and simple electronic modifications. In this context, the cooperative adaptive cruise control approach are discussed for specific urban and highway platooning missions. In addition, we provide details of vehicle parameters, mathematical models of control structures, and experimental tests for the validation of our models. Moreover, the impact of vehicle to vehicle communication in the existence of static road-side units are given. Finally, we propose a set of stability guaranteed controllers for highway platooning missions. Formal problem definition of highway platooning considering constant and velocity dependent spacing strategies, and formal string stability analysis are included. Additionally, we provide the design of novel intervehicle distance based priority coefficient of feed-forward filter for robust platooning. In conclusion, the importance of increasing level of autonomy of single agents and platoon topology is discussed in performing cohesive coordination and collaborative driving missions and in mitigating sensory errors. Simulation and experimental results demonstrate the performance of our cohesive motion and string stable controllers, in addition we discuss application in formation control of autonomous multi-agent systems.
|
5 |
Safety of Earthen Stormwater Infiltration Best Management Practices (BMP) Adjacent to HighwaysJanuary 2019 (has links)
abstract: The California Department of Transportation (Caltrans) is required to comply
with the National Pollution Discharge Elimination (NPDES) permit, which includes the infiltration of stormwater runoff from highways and implementing soil based best managements practices (BMPs). Stormwater BMPs are in place to prevent pollution in stormwater runoff as well as to facilitate the stormwater discharge from the road. Per this new permit, Caltrans is to install soil based BMPs that can absorb the 85th percentile of a 24-hour stormwater event. In order to absorb the stormwater runoff, the area used is the Clear Recovery Zone (CRZ), which are the road embankments/slopes located adjacent to the roadside. The CRZ must be traversable and recoverable in order to meet roadside traffic safety standards. A major concern for Caltrans is the uncertainty on how these BMPs will affect the safety of a vehicle, if a vehicle were to interact with the soft soils.
In order to provide an insight on the effects of the BMPs, the modeling and simulation of vehicle dynamics under certain interactions between the roadside, soil, and vehicle was completed. The research used computer simulations to quantify the probability of rollover accidents under several different vehicle, driving and ground conditions. The vehicles traversing typical archetype roadsides on soft soil are simulated using MsMac3D software. It was important to model the properties of the vehicle, roadside, mechanical and hydraulic properties of soils realistically in order to obtain an accurate representation of a real-world vehicle and soil interaction.
The outcome was a library of simulations that provided quantifiable data on the effect that soft soils have on the safety and rollover potential of a vehicle traversing the CRZ. / Dissertation/Thesis / Masters Thesis Civil, Environmental and Sustainable Engineering 2019
|
6 |
Modeling and Energy Management of Hybrid Electric VehiclesBagwe, Rishikesh Mahesh 12 1900 (has links)
Indiana University-Purdue University Indianapolis (IUPUI) / This thesis proposes an Adaptive Rule-Based Energy Management Strategy (ARBS EMS) for a parallel hybrid electric vehicle (P-HEV). The strategy can effciently be deployed online without the need for complete knowledge of the entire duty cycle in order to optimize fuel consumption. ARBS improves upon the established Preliminary Rule-Based Strategy (PRBS) which has been adopted in commercial vehicles. When compared to PRBS, the aim of ARBS is to maintain the battery State of Charge (SOC) which ensures the availability of the battery over extended distances. The proposed strategy prevents the engine from operating in highly ineffcient regions and reduces the total equivalent fuel consumption of the vehicle. Using an HEV model developed in Simulink, both the proposed ARBS and the established PRBS strategies are compared across eight short duty cycles and one long duty cycle with urban and highway characteristics. Compared to PRBS, the results show that, on average, a 1.19% improvement in the miles per gallon equivalent (MPGe) is obtained with ARBS when the battery initial SOC is 63% for short duty cycles. However, as opposed to PRBS, ARBS has the advantage of not requiring any prior knowledge of the engine effciency maps in order to achieve optimal performance. This characteristics can help in the systematic aftermarket hybridization of heavy duty vehicles.
|
7 |
A STRATEGY TO BLEND SERIES AND PARALLEL MODES OF OPERATION IN A SERIES-PARALLEL 2-BY-2 HYBRID DIESEL/ELECTRIC VEHICLEPicot, Nathan M. January 2007 (has links)
No description available.
|
8 |
Vehicle Modeling and Adams-Simulink Co-Simulation with Integrated Continuously Controlled Electronic Suspension (CES) and Electronic Stability Control (ESC) ModelsRao, Sughosh J. 26 June 2009 (has links)
No description available.
|
9 |
Unified Net Willans Line Model for Estimating the Energy Consumption of Battery Electric VehiclesLi, Candy Yuan 09 September 2022 (has links)
Due to increased urgency regarding environmental concerns within the transportation industry, sustainable solutions for combating climate change are in high demand. One solution is a widespread transition from internal combustion engine vehicles (ICEVs) to battery electric vehicles (BEVs). To facilitate this transition, reliable energy consumption modeling is desired for providing quick, high-level estimations for a BEV without requiring extensive vehicle and computational resources. Therefore, the goal of this paper is to create a simple, yet reliable vehicle model, that can estimate the energy consumption of most, if not all, electric vehicles on the market by using parameter normalization techniques. These vehicle parameters include the vehicle test weight and performance to obtain a unified net Willans line to describe the input/output power through a linear relationship. A base model and three normalized models are developed by fitting the UDDS and HWFET energy consumption test data published by the EPA for all BEVs in the U.S. market. Out of the models analyzed, the normalization with weight performs best with the lowest RMSE values at 0.384 kW, 0.747 kW, and 0.988 kW for predicting the UDDS, HWY, and US06 data points, respectively, and 0.653 kW for all three data sets combined. Consideration of accessory loads at 0.5 kW improves the model normalized by weight and performance by a reduction of over 20% in RMSE for predictions with all data sets combined. Removing outliers in addition to consideration of accessory loads improves the model normalized by weight and performance by a reduction of over 36% in RMSE for predictions with all data sets combined. Overall, results suggest that a unified net Willans line is largely achievable with accessible energy consumption data on U.S. regulatory cycles. / Master of Science / Due to increased urgency regarding environmental concerns within the transportation industry, sustainable solutions for combating climate change are in high demand. One solution is a widespread transition from conventional internal combustion engine vehicles (ICEVs) to battery electric vehicles (BEVs). To facilitate this transition, reliable energy consumption modeling is desired to support quick, high-level analyses for BEVs without requiring expensive resources. Therefore, the goal of this paper is to create a simple vehicle model that can estimate the energy consumption of most, if not all, electric vehicles by scaling the data using vehicle parameters. These parameters include the vehicle test weight and performance to obtain a unified net Willans line model describing the input/output power through a linear relationship. The UDDS (city) and HWFET (highway) energy consumption data points used to develop the model are easily accessible from published EPA data. Out of the models analyzed, the normalization with test weight performs best with the lowest error values at 0.384 kW, 0.747 kW, and 0.988 kW for predicting the UDDS, HWFET, and US06 (aggressive city/highway cycle) data points, respectively, and 0.653 kW for all three data sets combined. Consideration of accessory loads at 0.5 kW improves the model normalized by weight and performance by a reduction of over 20% in error for predictions with all data sets combined. Removing outliers in addition to consideration of accessory loads improves the model normalized by weight and performance by a reduction of over 36% in error for predictions with all data sets combined. Overall, results suggest that a unified net Willans line is largely achievable with accessible energy consumption data on U.S. regulatory cycles.
|
10 |
Willans Line Modeling for Powertrain Analysis and Energy Consumption of Electric VehiclesHarvey, Daniel R. 01 July 2021 (has links)
With electric vehicles becoming increasingly prevalent in the automotive market consumers are becoming more conscientious of total driving range. In light of this trend, reliable and accurate modeling methods are necessary to aid the development of more energy efficient vehicles with greater drivable range. Many methods exist for evaluating energy consumption of current and future vehicle designs over the US certification drive cycles. This work focuses on utilizing the well-established Willans line approximation and proposes a simplified modeling method to determine electric vehicle energy consumption and powertrain efficiency. First, a backwards physics-based model is applied to determine tractive effort at the wheel to meet US certification drive cycle demand. Second, the Willans line approximation then augments the tractive effort model and parameterizes the vehicle powertrain to establish a bi-directional power flow method. This bi-directional approach separates propel and brake phases of the vehicle over the certification City and Highway drive cycles to successfully isolate the vehicle powertrain from non-intrinsic losses, such as parasitic accessory loads. The proposed method of bi-directional modeling and parameter tuning provides significant insight to the efficiency, losses, and energy consumption of a modeled electric vehicle strictly using publicly available test data. Results are presented for eight electric vehicles with production years varying from 2016 to 2021. These electric vehicles are chosen to encapsulate the electric vehicle market as performance electric vehicles to smaller commuter electric vehicles are selected. All vehicles are modeled with an accessory load constrained between 300 and 850 W and a regenerative braking ("regen") low-speed cutoff of 5 mph with six of the eight vehicles modeled with a regenerative braking fraction of 94%. The bi-directional Willans line is then tuned to reach agreement with the net EPA energy consumption test data for each vehicle with the results presented as representative of the chosen vehicle. Lastly, a transfer function relating major model inputs to the output is derived and lends considerable insight for the sensitivity of the modeling method. Sensitivity of the proposed modeling method is conducted for a 2017 BMW i3 with the model deemed reasonably resilient to changes in input parameters. The model is most sensitive to changes in powertrain marginal efficiency with a 6% decrease of marginal efficiency leading to a 0.404 kW and 0.793 kW cycle average net battery power increase for the City and Highway drive cycles respectively. Additionally, the model is also sensitive to changes in vehicle accessory load with a direct relationship between increases of vehicle accessory load to increases of cycle average net battery power for the City and Highway cycles. The sensitivity results justify the use of the proposed model as a method for evaluating vehicle energy consumption and powertrain efficiency solely using publicly available test data. / Master of Science / Developing robust and accurate methods for analyzing electric vehicle energy consumption and powertrain efficiency is of great interest. For the purposes of this paper, powertrain refers to a motor / inverter pair which is coupled to a simple gear reduction for torque multiplication. Many vehicles are designed with motors of varying power and torque capabilities which can present challenges when attempting to effectively compare electric vehicles from different manufacturers. The proposed modeling method presented in this work utilizes public test data to derive detailed vehicle and powertrain information. Vehicle energy consumption is also modeled and compared to net EPA test data. Eight electric vehicles are modeled with each vehicle representing a specific segment of the current electric vehicle market. A bi-directional Willans line is applied to model the propel and brake phases of each electric vehicle over the US certification drive cycles. The bi-directional approach effectively isolates the vehicle powertrain from non-intrinsic losses. From the derived powertrain parameters and modeled energy consumption, the proposed method is deemed accurate and highly useful for translating public test data to detailed vehicle information. Lastly, a sensitivity analysis is presented with the proposed method deemed reasonably resilient to changes in input parameters. The modeling method is most sensitive to changes of powertrain marginal efficiency and vehicle accessory load but constraining these inputs to reasonable ranges for electric vehicles proves sufficient.
|
Page generated in 0.1065 seconds