The subject of this diploma thesis is a design documentation of multi-functional building. The building has a basement and four above-ground floors. The basement is served as an APS garage. The ground floor contains commercial premises as a bistro, copy centre and hairdresser's. The first floor is used for offices. The third and the fourth floors contain two maisonette with roof decks. Structural system is masonry systém of lightweight concrete block Ytong and RC’s elements. A roof is design as warm flat roof with waterproof membrane of m-PVC foil. Dominant elements are a ventilated cladding Cembrit and glass facade oriented on south-east.

This diploma thesis medical house in Hustopece deals with a design and project documentation for construction health facilities in Hustopece. Object is used to provide a daily patient care. There are nine private medical facilities of various specializations, pharmacy and optics. Object with its proposal allows wheelchair access. This is a hasnot four-storey building. Structure consists of monolithic reinforced concrete skeleton with stiffening walls, footings based and passports. internal unsound are designed from the drywall. Building roof is flat, edging attic.

Idag ökar man isoleringen alltmer i takkonstruktion för att spara energi. Ökad mängd isolering minskar temperaturen över takets yttre delar och höjer den relativa fuktigheten där.  Dessutom finns risk att fuktigt material byggs in mellan alltmer täta skikt vilket leder till att det tar längre tid för byggfukten att torka. Detta resulterar i en ogynnsam fuktfördelning med höga relativa fuktigheter över konstruktionen där risken för mikrobiell påväxt ökar. Syftet med denna studie är att utreda hur fuktomlagring sker baserad på inbyggnadsfuktkvoten i välisolerade parallelltak. För att göra riskbedömning av olika takkonstruktioner har fuktsimuleringar gjorts i Wufi 2D där resultat analyserats i Wufi Bio för bedömning av risknivå för mikrobiell påväxt. Resultaten indikerar klart skillnad mellan val av ventilerad och oventilerad takkonstruktion. Det råder även en skillnad mellan val av isoleringsmaterial, takets färdigställandedatum, takets exponeringsriktning och takets utvändiga ytskikt. Slutsatsen är att det råder en större risk för mikrobiell påväxt hos oventilerad takkonstruktion, takkonstruktion som färdigställs under höst (den 1 oktober) jämfört med vår (den 1 april), takkonstruktion som är exponerad mot norr jämfört med söder samt takkonstruktion med utvändigt ytskikt av plåt istället för sedum. / Today there's an increase in the use of insulation in roof constructions in order to save energy. Increased amount of insulation allows temperature drops in the outer layers of the roof resulting in higher relative humidity in the surrounding construction.  There is also a risk that moist materials are built-in between tight layers which contributes to longer drying processes in order for the moisture to successfully dry out. This also contributes to an unfavorable divide in moisture with high relative humidity settling on top of the construction where risk of microbial growth is the greatest. The aim of this study is to investigate how moisture behaves based on the mounting quota of moist in well insulated parallel roof constructions. To make a risk assessment of different roof constructions, different simulations have been created in Wufi 2D where results are further analyzed in Wufi Bio for final assessment on whether there is an apparent microbial advantage. The result help shimmer light on the differences between ventilated and unventilated roof constructions. There is also an evident importance in choice of insulation materials, the finish-date for the roof, exposure vulnerability and the outer coating of the roof. The conclusion is that there is a greater risk of microbial damages in unventilated roof constructions when comparing the roof construction that is finished first of October in comparison to first of April, the roof construction that is exposed to north rather than south and to the roof construction with outer surface layer of tin rather than sedum.

The thesis focuces on project documentation for a construction project with the aim to design home for children under institutional care. Located on the outskirts of Skuteč, the building is three-storey, detached and partially basemented. The basement area lays on the slab foundations and the first floor on strip foundations. Vertical structures are made of ceramic blocks and local reinforced concrete columns while horizontal structures are made of reinforced concrete slabs and wooden trusses over the gym. The building is covered by a vegetated flat roof. The building houses six residential units for six family groups with a total capacity of 43 children. The basement includes gym and fitness with technical facilities. The first floor consists of three residential units, changing rooms for the gym and kitchen with facilities. The second floor houses remaining three residential units, offices and the refectory. The upper floor is used for children´s education and entertainment.

The subject of this diploma thesis is the design of multifunctional building in Brno, in Cimburkova street. The building is placed on flat terrain and it has four floors. Floor plan of multifunctional building is rectangle shaped. There are three different establishments in this building. Most of space of ground floor and first floor is used as parking. Rest of space of ground floor and second floor is used as café, hairdresser and store. There are eight separate offices and sanitary facilities, break rooms, storages and servers. The supporting construction of building is made of reinforced concrete column system and ceiling slabs. The building is based on reinforced concrete slab and than there is a flat roof above the building.

The diploma thesis aims to elaborate on the project documentation of the buildings SO 01 - hotel and SO 02 - a winery within the complex of Viniculture Havraníky, a former agricultural area. SO 01 is a two-storey building with a partial basement. There is accommodation for 50 guests, a restaurant and a wine bar. SO 02 is a single-storey building with a basement. It consists of all operations for the production of a medium-sized winery. The structural system of both buildings is designed as a cast-in-place concrete frame. Fasade is insulated with an external thermal insulation system (ETICS). The roofing of the SO 01 building is solved by a flat green roof, whereas the roofing of the SO 02 building s solved by a saddle roof with girders.

The subject of the final thesis is the elaboration of design documentation for the new construction of an accommodation facility, specifically a boarding house intended for recreation. The new building is located in the cadastral area of ??the village Vernířovice. It is a building with three floors above ground and one underground floor. The building is based on foundation strips made of plain concrete and a foundation slab made of reinforced concrete. The vertical load-bearing structures are made of cley blocks and blocks of permanent formwork. Horizontal load-bearing structures are made of reinforced concrete. The roof structure is saddle with elongated dormers.

The aim of the master´s project is to provide designs for building permission for a nearly zero-energy veterinary clinic. It is a detached building with two aboveground floors. There are three clinics, one operating rooms, laboratory and staff facilities in the building. First part presents the design of building structure, The superstructure is based on strip foundations made of reinforced concrete in combination with pre-cast permanent formwork made of concrete blocks. The structural system is designed as a masonry system from clay masonry with columns from reinforced concrete. The external walls are load-bearing and covered with thermal insulation and ventilated facade. The floor and roof bearing structure is made of prefabricated concrete slabs. The building is covered with a warm flat green roof. Second part includes the design of building services as lighting, heating, heat recovery ventilation unit. These processes are together shown in a global scheme. Third part is focused on Life cycle assessment of three different flat roof assemblies to compare how they affect the environment. It uses a functional unit 1m2 of a flat roof to define parameters and show how big impact they have on the environment. The project was elaborated using Revit, AutoCad, Deksoft, Building design, GaBi a Lumion software.

This aim of the diploma thesis is the design of hotel with restaurant, outdoor parking and garage in Brno - Kníničky, Hrázní street on sloping plot no. 3570 and 3571. The hotel is with partial basement and has five above-ground floors. The total capacity of the hotel is 99 guests in 50 guest rooms. Structural systém is cast-in-place concrete frame. Infill wall are from clay masonry Heluz. Partition is from plasterboard partition. External wall are with contact thermal insulation system. Part of the external wall have ventilated facade. Floor structure is from cast-in-place reinforced concrete floor. The roof is green roof. The outdoor parking consists of ten parking spaces, fice of which are barrier-free for people with reduced mobility. Residue parking spaces are in the garage opposite the hotel. From the side of the hotel are parking spaces for hotel staff. On plot are designed playground.

This diploma thesis focuses on the design of a new kindergarten building located on a slightly sloping plot in Dubňany, South Moravia. Functionally it is possible to divide the kindergarten into three parts - administration, education and technical facilities. There are two classes, each for 24 for children, a separate common room and a pottery class. The total capacity of the kindergarten is 48 children. It is designed as a single-storey building with a green flat roof and without a basement. It is based on concrete foundation strips. Loadbearing mansory is made of sand-lime blocks, partitions are made of sand-lime blocks and aerated concrete blocks, ceiling is made of prestressed hollow core slabs. The walls are insulated with a combination of contact thermal insulation system and ventilated facade with facade cladding of fibre-cement board and timber cladding. Atypical round windows were use as a fun detail for the both classrooms and the common room.