Cette thèse porte sur la commande de réseaux multi-terminaux à courant continu (MTDC) basés sur des convertisseurs multiniveaux modulaires (MMCs).Tout d’abord, notre attention se focalise sur l'énergie stockée en interne dans le MMC qui constitue un degré de liberté additionnel apporté par sa topologie complexe. Afin d’en tirer le meilleur parti, les limites de l’énergie interne sont formulées mathématiquement.Afin de maîtriser la dynamique de la tension DC, l’utilisation de ce nouveau degré de liberté s’avère d’une grande importance. Par conséquent, une nouvelle de stratégie de commande, nommée «Virtual Capacitor Control», est proposée. Cette nouvelle méthode de contrôle permet au MMC de se comporter comme s’il possédait un condensateur de taille réglable aux bornes, contribuant ainsi à l’atténuation des fluctuations de la tension DC.Enfin, la portée de l’étude est étendue au réseau MTDC. L'un des défis majeurs pour un tel système est de faire face à une perte soudaine d'une station de convertisseur qui peut entraîner une grande variation de la tension du système. A cet effet, la méthode de statisme de tension est la plus couramment utilisée. Cependant, l'analyse montre que l'action de contrôle souhaitée risque de ne pas être réalisée lorsque la marge disponible de réserve de puissance du convertisseur est insuffisante. Nous proposons donc une nouvelle structure de contrôle de la tension qui permet de fournir différentes actions en fonction du signe de l'écart de la tension suite à une perturbation, associée à un algorithme qui détermine les paramètres de statisme en tenant compte du point de fonctionnement et de la réserve disponible à chaque station. / The scope of this thesis includes control and management of the Modular Multilevel Converter (MMC)-based Multi-Terminal Direct Current (MTDC).At first, our focus is paid on the internally stored energy, which is the important additional degree of freedom brought by the complex topology of MMC. In order to draw out the utmost of this additional degree of freedom, an in-depth analysis of the limits of this internally stored energy is carried out, and they are mathematically formulated.Then, this degree of freedom of the MMC is used to provide a completely new solution to improve the DC voltage dynamics. A novel control strategy, named Virtual Capacitor Control, is proposed. Under this control, the MMC behaves as if there were a physical capacitor whose size is adjustable. Thus, it is possible to virtually increase the equivalent capacitance of the DC grid to mitigate the DC voltage fluctuations in MTDC systems.Finally, the scope is extended to MMC-based MTDC grid. One of the crucial challenges for such system is to cope with a sudden loss of a converter station which may lead to a great variation of the system voltage. The voltage droop method is commonly used for this purpose. The analysis shows that the desired control action may not be exerted when the available headroom of the converter stations are insufficient. We thus propose a novel voltage droop control structure which permits to provide different actions depending on the sign of DC voltage deviation caused by the disturbance of system voltage as well as an algorithm that determines the droop parameters taking into account the operating point and the available headroom of each station.

The work deals with relatively new components allowing electric energy accumulation – ultracapacitors. It focuses on their application in traffic systems – in independent electric vehicles. Design and verification of a system with ultracapacitor and DC/DC adaptive converter was done. Control of the adaptive converter modifies very positively the time wafeform of the traction accumulator current during the drive cycle. The designed connection of ultracapacitor and DC/DC converter implemented in the drive structure of experimental electric vehicle with induction machine contributes to increment the action radius of the vehicle by 16% (determined by experimental verification). This result was achived particularly by limitation of traction accumulator current peaks, And by more effective storage of energy gained by recuperative braking of the vehicle as well. The core of the system is a control of the adaptive converter in order to provide an active filtration of the accumulator’s current to its long-period mean value, i.e. elimination of current (power) peaks. These are caused by acceleration from non-zero initial vehicle speed or by recuperative braking. This is done by a subsidiary current loop. The converter has a superior voltage regulation loop, which sets in long-time period the voltage of ultracapacitors to the proper value – indirectly dependent on the speed of the vehicle. This ensures the appropriate energy management of the ultracapacitor. In the following, properties of test set of ultracapacitors were verified. Finally, methods of suppression of capacity variability influence in series connection of these components were compiled and critically reviewed.

[pt] O incremento de geração fotovoltaica de grande porte traz consideráveis mudanças nas características operativas e dinâmicas do sistema quando este é submetido a grandes distúrbios. Um dos problemas técnicos mais relevantes é a estabilidade transitória, já que a geração intermitente ligada ao sistema por conversores eletrônicos não contribui para o aumento da inércia total do sistema. Entretanto, os conversores eletrônicos podem, potencialmente, trazer novas oportunidades de controle rápido para dar suporte aos geradores síncronos em resposta a um distúrbio severo. No presente trabalho propõe uma estratégia de controle para inversores fotovoltaicos baseado na injeção da corrente com um grande impacto na resposta transitória do ângulo do rotor da máquina síncrona, identificada através da análise de sensibilidade dos autovalores e dos fatores de participação. Ao fazer isso, é possível aumentar a potência ativa da máquina síncrona próximo do seu valor pré-falta, reduzindo o desequilíbrio entre o torque elétrico e mecânico. A estratégia de controle proposta foi testada experimentalmente, utilizando um inversor e uma montagem máquina síncrona-motor e, através da simulação de um sistema híbrido com um sistema fotovoltaico de grande porte. Os resultados mostram que a estratégia de controle proposta não está apenas em conformidade com os requisitos dos código da rede para melhorar a estabilidade da tensão durante uma perturbação grave, mas também é capaz de manter a estabilidade transitória da rede provando, assim, ser uma melhor alternativa em relação à capacidade FRT requerida pelos códigos de rede. / [en] The increase in photovoltaic generation has caused changes in the power system s operative and dynamic characteristics when subjected to severe disturbances. One of the most relevant problems associated with this renewable energy source is the transient stability, as renewable generation connected to the system by electronic converters does not contrinute to the increase of the total inertia of the system. However, electronic converters can potentially bring new opportunities for rapid control to support synchronous generators in response to severe disturbance. The present work proposes a control strategy for photovoltaic inverters based on the injection of the current with a major impact on the transient response of the synchronous machine rotor angle, identified through the eigenvalue sensitivity analysis and the participation factors. By doing so, it is possible to increase the synchronous machine active power output close to its pre-fault value, reducing the disequilibrium between mechanical and electrical torque. The proposed control strategy was experimentally tested using an inverter and a synchronous-motor machine assembly and, by simulating a hybrid system with a large photovoltaic system. The results show that the proposed control strategy not only conforms to the grid codes requirements to improve voltage stability during a severe disturbance, but is also able to maintain transient stability thus proving to be a better alternative to the FRT capability required by the grid codes.