Many countries in the world today have reached the point of full utilization of their forest resources, to satisfy their need for lumber and pulp and paper products. Others have reached the point where their consumption is far in excess of the capacity their domestic forest stands can sustain and they are net importers of these products. Still fewer have developed the practice of recycling these products to any appreciable extent. Canada and United States are approaching full utilization and have only accomplished a recycling rate of approximately 20% of paper and paperboard products. On the other hand conservationists are calling for more efficient utilization of resources, ecologists are calling for less waste and less pollution, while the burden on city garbage collection facilities, 50% of which is paper products, is increasing exponentially. In this thesis the technical processes required to make first quality newsprint from recycled newspaper are shown to be available. The economics of such a plant is examined in detail leading to the judgment that it is economically sound. The conclusion is reached that a 300 ton/ day newsprint mill can be entirely supported by locally generated waste newspaper in a city of three million population or over. Furthermore, it is concluded that if the collection and transportation of waste newspapers is not impeded by governmental regulations or unanticipated competition in the feeder cities, such a plant is still economically feasible after allowing for water barge transportation of the raw materials as far as 200 miles. / Business, Sauder School of / Graduate

Thesis (M.S.)--University of Wisconsin--Madison, 1996. / Typescript. eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references (leaves 106-108).

This thesis investigated the technological economics of waste paper recovery and recycling in UK. The major problem in waste paper recycling is still the removal of contraries, although technological developments have so far been able to remove some of them. The costs incurred by the local authorities in recovering waste paper were investigated. Local authority costing was found to be inconsistent and many of them did not include all the relevant indirect costs and savings, so that many local authorities claimed to be making heavy losses in their operations. Full accounting incorporating all the relevant indirect costs and savings have shown that most local authorities incurred much smaller losses and in some cases profited from their waste paper recovery operations. A general computer model was developed to allow local authorities to check the viability of their on-going operations and another computer model was developed for an investment appraisal of a proposed waste paper recovery operation. Multiple regression models were developed to forecast the demand of waste paper in the short term and the long term. The cost to the mill in recycling waste paper was also examined. Waste paper recycling can only be increased by improving demand for waste paper based products. Various alternatives for diversifying the markets for waste paper were investigated, particularly those outside the paper and board industry. The government's role in helping to inc~ease waste paper recovery and recycling was examined and some government actions that could be taken were proposed.

Mondi Ltd. operates a deinking plant at its Merebank mill. The plant recycles 85 000 tons per annum of flat news and magazine to produce a furnish for its newsprint papermachines. A review of the relevant pulping and flotation chemistry literature revealed that the role played by sodium silicate appears to be multi-faceted and in some dispute. Sodium silicate has an undisputed role in pH buffering, hydrogen peroxide stabilisation and the prevention of fibre yellowing. However, its role in deinking is said to be that of an ink collector or alternatively an ink dispersant. The mill's own experience has shown that the sodium silicate plays a vital role in the deinking process. Sodium silicate's ability to disperse ink, both alone and in the presence of calcium ions and fatty acid soaps, was investigated using a model ink system. A representative newsprint ink base was dispersed in the laboratory under conditions similar to those encountered in a deinking pulper. The resultant dispersions were studied using turbidity and particle size analysis. The morphology of the ink particles was determined using a scanning electron microscope. Sodium silicate proved to be a poor disperser of ink particles, but nevertheless appeared to greatly influence the dispersing properties of the soap in the presence of calcium ions. The nature of the interactions between sodium silicate, calcium ions and the collector soap were studied in an attempt to elucidate the role of sodium silicate. A model system consisting of the sodium salt of collector soap, calcium ions and sodium silicate was studied under the conditions that prevail in a typical newsprint deinking pulper. It was found that the soap and the sodium silicate compete for the calcium ions, and sodium silicate showed a measurable chelating e:ffect on calcium ions. Thus, increasing levels of sodium silicate lead to an increase in the concentration of sodium soap in solution. It was hypothesised that this effect would lead to better dispersion of ink particles and improved deinking performance. This chelating effect was evaluated in laboratory deinking studies. Samples of newsprint were pulped in a 251 Lamort laboratory pulper under a variety of conditions, viz. with fresh water, with an excess of soap, with an excess of calcium, with and without sodium silicate. The pulps were floated in a 201 flotation cell. The brightness and colour of the unfloated and floated pulps were measured. The level of the final brightness after flotation was taken as a measure of deinking efficiency. The highest final brightness was achieved when there was an excess of sodium soap and a low Ca hardness in the pulper. Softening the water used in pulping without adding excess sodium soap did not significantly improve pulp brightness. The lowest final brightness occurred in the presence of an excess of calcium in the pulper. Calcium in the pulper in the presence of sodium silicate did not result in a significantly lower final brightness. The results support the hypothesis that sodium silicate sequesters the soluble calcium in a pulping system, thereby increasing the sodium soap concentration and the resultant deinking performance. Apart from sodium silicate's chief role as a peroxide stabiliser, the sequestering action on calcium appears to be its main mechanism of action in a deinking system. An appreciation of this role will facilitate the optimisation of deinking systems with respect to calcium hardness and silicate concentration. To this end it was recommended that the Merebank deinking plant should evaluate the use of water with a low calcium ion concentration and the addition of some soap into the pulper to improve their deinking plant performance. / Thesis (M.Sc.)-University of Natal, Durban, 2003.

The greatest appreciation is extended to all who contributed valuable time to assist with this project. In particular, Barry Messer, from the Recycling Education Project at Portland State University, who recommended study ideas and provided integral information; Bruce Walker, from the City of Portland, who granted many interviews and was always willing to answer questions; Steve Apotheker, from Resource Recycling, who invited me to use the office library and spent time discussing current recycling issues; Deborah Adams, from Metro, who furnished me with essential data; and Wess Brenner, from the Academic Computing Center, who contributed substantial time to help in the analysis of the data. Additionally, Mara Tableman, from the Mathematical Sciences Department and Dr. Robert Fountain, from the Statistics Consulting Laboratory provided considerable advise about statistical procedures. I also deeply thank my parents, Rob Allerman, Jennifer Wheelan, and other friends and family who supported me throughout the completion of this document. Joel Freedman particularly, provided continual encouragement, unending patience and sound counsel. From the Geography department, I extend my sincere gratitude to Carolyn Perry and my committee, Joseph Porascky, Thomas Harvey and most importantly, my advisor, Dr. Teresa Bulman.

The interest in this study was initiated by the rapid global transition of paper usage to digital systems in teaching and learning at tertiary institutions, particularly those that are signatories to the Talloires Declaration, which include Rhodes University (RU). It was discovered that there are two earlier studies (Leslie et al. 2009; Amutenya et al. 2009) that investigated and proposed recommendations towards sustainable paper usage at Rhodes University (RU). This study then investigated the response of RU to the proposed recommendations of the above mentioned studies and evaluated the conditions that promote and constrain sustainable paper usage in teaching and learning, and the attitudes of users thereof.

Currently most deinking technologies are dependent upon flotation and dissolved air flotation (DAF) technology in order to separate inkjet ink from fiber and water. Much of this technology is based on ink that is extremely hydrophobic. This made flotation and DAF very easy to use because the ink in the water would very easily move with the air in flotation and be brought to the surface, after which the ink can be skimmed and the pulp can be used. Now that small scale printing has become the norm, there has been a move to high quality, small scale printing. This involves the use of a hydrophilic ink. Hydrophilic ink cannot be easily separated from water and fiber the same way the hydrophobic ink can be. With low concentrations of hydrophilic ink in the process water stream, it can be absorbed into the process but as the hydrophilic ink concentration rises alternative methods will be needed in order to separate inkjet ink from water. One solution is to find a method to effectively increase ink particle size. This will enable the ink particles to be filtered or to have an increase ecacy of removal during flotation. In this thesis, one solution is discussed about how electric field and electric plasma technologies can be used to increase particle size and help purify process water in recycle mills. This plasma treatment can very effectively bring ink particles together so that they may be separated by another method. There are two methods by which this may take place. One is polymerization and the other is electro-coagulation. These processes can work side by side to bring ink particles together. This plasma treatment process creates free radicals by stripping off hydrogen atoms from surrounding organic matter. These free radicals then react with the high alkene bond content within the ink to create a very large covalently bonded molecule. This is the new mechanism that is being investigated in this thesis. The other action that is taking place is electro-coagulation. Plasma treated ink can be filtered out using a cellulose acetate or cellulose nitrate membrane or they can be filtered using paper or fiber glass filters as well. The extent at which these can be filtered out is dependent on the size of the pores of the filter. In this study, it was shown that the plasma treatment was able to clean water with a fairly small amount of energy. It was also found that treatment time and concentration had very little eect on the outcome of the treatment ecacy. One factor that did have an effect was the pH. At very high pH values the process became noticeably less eective. The high pH essentially eliminated the electro-coagulation aspect of the treatment process and also hurt the polymerization aspect as well because of lower amount of hydrogen atoms available for the plasma to create free radicals. A model of the process was used to try to give the reader an idea of the ecacy that the process would have in an industrial scale process. The model assumes that two types of ink particles exist. One is ink that has a radical and another in which the ink does not have a radical. The model also assumes that if ink is at all polymerized, ink is filtered out with the 0.8 micron filter. The model assumes three reactions; initialization, propagation and partial termination. The partial termination is a result from the general chemical structure of ink. Ink has many double bonds in its general structure which makes termination very unlikely to occur, so the model assumes that on average when two radials interact that only one is eliminated. This model is only supposed to give the reader an idea of the ecacy of the process. The numbers provided in the model will change very significantly in a different system. The evidence behind polymerization aspect of the process comes from two main sources. One is the small molecule analysis from methanol after being exposed to the plasma and the other from the plasma being exposed to allyl alcohol. The small molecule analysis shows that the process generates free radicals on organic molecules. Methanol was exposed to the plasma and then the resulting GC/MS analysis showed that 1,2-ethanediol was present, this showed that the electric discharge process was able to create free radicals on organic molecules in the liquid phase. Using a similar process the plasma discharge process was exposed to a mixture of allyl alcohol, water and propanol and water in two separate experiments. The difference between these two molecules is an alkene bond that is between the carbon two and carbon three atoms. The particle size of both samples was then analyzed and it was shown that the solution with allyl alcohol had an average particle size about an order of magnitude larger than the solution with propanol in it. Because of all the evidence discussed here and in the rest of the thesis we believe that the plasma treatment of ink has both polymerization and electro-coagulation aspect. This process could also be a potential solution to the water soluble ink problem that will soon face the recycling industry.

Office waste paper is one of the fastest growing segments of the recycled fiber industry. Toner particles are rigid, insoluble and difficult to disperse and detach from fibers. Therefore papers made from recycled office waste having high toner content will contain noticeable ink particles. This work will consider an alternative way of efficient de-inking using plasma polymers which will not affect the fibers chemically or mechanically. The focus is development and characterization of plasma-deposited films to serve as a barrier film for the adhesion of ink toner to the paper fibers and thereby enhance ink lift off from the fibers. The plasma treated paper is coated with fluorocarbon (PFE) and polyethylene glycol (PFE) films, with constant thickness of PFE and varying the thickness of PEG by 1500, from 1500 to 4500, for the three cases studied (PFE greater than PEG, PFE=PEG, PFE less than PEG). Handsheets were made using virgin fibers to eliminate effects of fillers. Once the sheets were coated and printing performed, they were re-pulped and both the slurry and the de-inking surfactant were placed in a flotation cell. Handsheets were made from the collected foam and stock and were scanned for particle count. The results indicated higher ink loss for the cases with increased thickness of polymer films. A handsheet with a 7500 film (PFE = 3000 and PEG = 4500) showed 61% ink removal compared to 38% for handsheets with no film deposited. There was also less material loss for the cases with higher polymer film thickness.

In the absence of any significant legislation, paper recycling in South Africa has grown to a respectable recovery rate of 43% in 2008, driven mainly by the major paper manufacturers. Recently introduced legislation will further boost the recovery rate of recycled paper. Domestic household waste represents the major remaining source of recycled paper. This source will introduce greater variability into the paper streams entering the recycling mills, which will result in greater process variability and operating difficulties. This process variability manifests itself as lower average brightness or increased bleaching costs. Deinking plants will require new techniques to adapt to the increasingly uncertain composition of incoming recycled paper streams. As a developing country, South Africa is still showing growth in the publication paper and hygiene paper markets, for which recycled fibre is an important source of raw material. General deinking conditions pertaining to the South African tissue and newsprint deinking industry were obtained through field surveys of the local industry and assessment of the current and future requirements for deinking of differing quality materials. A large number of operating parameters ranging from waste mixes, process variables and process chemical additions, typically affect the recycled paper deinking process. In this study, typical newsprint and fine paper deinking processes were investigated using the techniques of experimental design to determine the relative effects of process chemical additions, pH, pulping and flotation times, pulping and flotation consistencies and pulping and flotation temperatures on the final deinked pulp properties. Samples of recycled newsprint, magazines and fine papers were pulped and deinked by flotation in the laboratory. Handsheets were formed and the brightness, residual ink concentration and the yield were measured. It was determined that the type of recycled paper had the greatest influence on final brightness, followed by bleaching conditions, flotation cell residence time and flotation consistency. The residual ink concentration and yield were largely determined by residence time and consistency in the flotation cell. The laboratory data generated was used to train artificial neural networks which described the laboratory data as a multi-dimensional mathematical model. It was found that regressions of approximately 0.95, 0.84 and 0.72 were obtained for brightness, residual ink concentration and yield respectively. Actual process data from three different deinking plants manufacturing seven different grades of recycled pulp was gathered. The data was aligned to the laboratory conditions to take into account the different process layouts and efficiencies and to compensate for the differences between laboratory and plant performance. This data was used to validate the neural networks and select the models which best described the overall deinking performances across all of the plants. It was found that the brightness and residual ink concentration could be predicted in a commercial operation with correlations in excess of 0.9. Lower correlations of ca. 0.5 were obtained for yield. It is intended to use the data and models to develop a predictive model to facilitate the management and optimization of a commercial flotation deinking processes with respect to waste input and process conditions. / Thesis (Ph.D.)-University of KwaZulu-Natal, Durban, 2011.

No abstract available. / Thesis (M.Dev.Studies)-University of KwaZulu-Natal, Durban, 2005.