141 |
Adsorption of dissolved organic matter (DOM) containing humic and fulvic acid in aqueous solution using carbon nanotubesJung, Meng-Jia 10 July 2011 (has links)
Drinkable water sources (mainly including rivers, reservoirs, and groundwater) are almost universally polluted by organic substances. In Taiwan, the majority of water treatment plants ensure high-quality drinking water by using chlorine to control the growth of algae and microorganisms, thereby removing odors, tastes, ferric and manganese irons. However, these processes produce disinfection by-products (DBPs), such as Trihalomethanes (THMs) and Haloacetic acids. These DBPs contained in drinking water increase the risk of cancer in human body. Thus commercial carbon nanotubes (CNTs) were employed as adsorbents to study adsorption of humic acid (HA) and dissolved organic matter (DOM) in raw water.
Experiment results exhibited kinetic adsorption reached equilibrium about 120 minutes,the best selection in kinetic models evaluation, fitting models such as Modified Freundlich equation, Pseudo-1st-order equation and Pesudo-2nd-oder equation, is Modified Freundlch equation model. In addition, intraparticle diffusion equation model was fitted well and showed adsorption process was controlled with pore diffusion.The maximum adsorbed amounts of DOM onto SWCNTs was calculated by the Langmuir model at 25¢J, reaching 54.01 mg TOC / g which were much higher than that onto commercially available granular activated carbon (10.69 mg TOC / g).The maximum adsorbed amounts of HA onto CNTs was calculated by the Langmuir model at 25¢J, reaching 125.95 mg TOC / g which were much higher than that onto commercially availablepowdered activated carbon (42.37mg TOC / g).A favorable adsorption of single-wall carbon nanotubes was found when high initial concentration of DOM was adsorbed at low ion strength, low pH and low temperature .According to results of thermodynamic parameters indicated that the adsorption was spontaneously and an exothermic reaction.
The short contact time needed to reach equilibrium as well as the high adsorption capacity of DOM suggests that CNTs possess highly potential applications for DOM removal from raw water.In the future, we can combine nanotube technology with disinfection technology and apply such technique on the end of processing unit for design of either the domestic treatment facilities or small simple water treatment in drinking water. Thus our results in this work will enhance the new treatment technology of drinking water and improve the safety of the public health. Another possibility will be to promote the opportunity of marketing development in drinking water.
|
142 |
Economic costs of conventional surface-water treatment: A case study of the Mcallen northwest facilityRogers, Callie Sue 15 May 2009 (has links)
Conventional water treatment facilities are the norm for producing potable water for
U.S. metropolitan areas. Rapidly-growing urban populations, competing demands for
water, imperfect water markets, and uncertainty of future water supplies contribute to
high interests in alternative sources of potable water for many U.S. municipalities. In
situations where multiple supply alternatives exist, properly analyzing which alternative
is the most-economically efficient over the course of its useful life requires a sound
economic and financial analysis of each alternative using consistent methodology. This
thesis discusses such methodology and provides an assessment of the life-cycle costs of
conventional water treatment using actual data from an operating surface-water
treatment facility located in McAllen, Texas: the McAllen Northwest facility. This
facility has a maximum-designed operating capacity of 8.25 million gallons per day
(mgd), but due to required shutdown time and other limitations, it is currently operating
at 78% of the designed capacity (6.44 mgd). The economic and financial life-cycle costs associated with constructing and operating
the McAllen Northwest facility are analyzed using a newly-developed Excel
2 spreadsheet model, CITY H O ECONOMICS . Although specific results are applicable
only to the McAllen Northwest facility, the baseline results of $771.67/acre-foot (acft)/
yr {$2.37/1,000 gallons/yr} for this analysis provide insight regarding the life-cycle
costs for conventional surface-water treatment.
The baseline results are deterministic (i.e., noninclusive of risk/uncertainty about datainput
values), but are expanded to include sensitivity analyses with respect to several
critical factors including the facility’s useful life, water rights costs, initial construction
costs, and annual operations and maintenance, chemical, and energy costs. For example,
alternative costs for water rights associated with sourcing water for conventional
treatment facilities are considered relative to the assumed baseline cost of $2,300/ac-ft,
with results ranging from a low of $653.34/ac-ft/yr (when water rights are $2,000/ac-ft)
to a high of $1,061.83/ac-ft/yr (when water rights are $2,600/ac-ft). Furthermore,
modifications to key data-input parameters and results are included for a more consistent
basis of comparison to enable comparisons across facilities and/or technologies. The
modified results, which are considered appropriate to compare to other similarly
calculated values, are $667.74/ac-ft/yr {2.05/1,000 gallons/yr}.
|
143 |
Perchlorate Degradation Using Partially Oxidized Titanium Ions and Ion Exchange Membrane Hybrid SystemPark, Sung Hyuk 2010 May 1900 (has links)
Perchlorate has entered human and environmental food chains and has received a great deal of attention because of its toxicity to humans. In this study, chemical degradation of perchlorate was investigated using partially oxidized titanium ions (Ti2+ and Ti3+) in solutions and as part of an ion exchange membrane reactor system. Aqueous titanium ions (Ti2+ and Ti3+) were applied to remove perchlorate ions and its destructive mechanism, reaction kinetics, and the effect of environmental factors were investigated. Titanium ions were able to degrade perchlorate ions very rapidly with half life less than one hour under conditions of high acid concentrations. A new reactor system with an ion exchange membrane was adapted to apply better the reactions of perchlorate destruction to water treatment practice. A novel treatment method was developed by integrating partially oxidized titanium ions with an ion exchange membrane, and it is named the Titanium and Membrane Hybrid System (TMH System). The results shown in this research demonstrate the feasibility of TMH System for perchlorate reduction. The perchlorate ions were rapidly adsorbed onto the ion exchange membrane and diffused through it, but they were reduced by titanium ions in the degradation zone relatively slowly. To enhance the overall rate of reaction, high concentrations of acid and Ti(III) are needed, but transport of hydrogen ions through the anion permeable membrane was observed and would be greater at higher acid concentrations. The proposed mathematical model predicts the performance and behavior of the TMH system for different physical and chemical conditions. It successfully described adsorption, diffusion and reduction of perchlorate in the system. This model could be used as an important tool for process design and optimization.
|
144 |
Improving the Treated Water for Water Quality and Good Tastes from Traditional and Advanced Water Treatment PlantsHAn, Chia-Yun 19 July 2007 (has links)
The purpose of this research is to compare the performance for the water quality of two traditional water treatment plants (WTP) and three advanced water treatment plants (AWTP), and to investigate the treated drinking water in distribution systems in Kaohsiung area for promoting the consumers¡¦ self-confidence.
Samples of the treated water from five major water supplies¡¦ WTP(noted numbers: WF1, WF2, WF3, WF4 and WF5) and the tap water at user¡¦s end were selected in planning of this work. It was the traditional WTP stage with treated drinking water and distribution systems in Kaohsiung area During 91 year to 92 year, so we conducted WF1 and WF2 of 8 times sampling and WF3, WF4 and WF5 for 2 times sampling at this stage. In and after 93 year, we conducted WF1, WF2, WF3, WF4 and WF5 of 8 times sampling from 93 year to 94year for the advanced WTP stage.
The major tests related with the parameters of influencing operation condition included pH, odor (abbreviated as TON), total trihalomethane (abbreviated as THMs), haloacetic acids (abbreviated as HAAs), nitrogen (abbreviated as, NH3-N, hardness, total dissolved solid (abbreviated as TDS), alkalinity, total organic carbon (abbreviated as TOC), calcium ion, flavor profile analysis (abbreviated as FPA), and suspension observation in boiling with treated waters from two WTP , three AWTP and the tap water at user¡¦s end in a distribution system.
It point out the better quality of treated water used the advanced water treatment plants than that of traditional water treatment plant. The items with improvement of water quality, including THMs, HAAs, hardness, TON, 2-MIB, TOC, alkinality and Ca ions concentration, is presented. Their efficiency for improvement are respectively 47%, 29%, 43%, 11%, 29%, 15%, 14% and 34%. The insignificant efficiency were concentrated at TDS, NH3-N, pH and FPA. Water quality of six items are fitted for the drinking water standard at present in Taiwan (such as: odor<3 TON; THMs<0.1 mg/L; NH3-N<0.1 mg/L; TDS< 600 mg/L; Hardness <400 mg as CaCO3/L; 6.0<pH <8.5). The HAAs is fit for water quality USEPA first stage water standard (HAAs<80 £gg/L). In the suspension observation in boiling experimentation, we cooperate with the experiment of suspension observation in boiling to do contrast with TDS and hardness experiment, which can find out, the treated water after the advanced procedure, the time with boiling increases, the condition of its suspended substance has great reduction. It show treated drinking water after the advanced WTP can huge improve the traditional WTP¡¦s white suspended substance or white material precipitate questions in the boiling.
In the contour map for water quality , we found that Gushan District, Lingya District, Qianzhen District, Xiaogang District, Fongshan City and Daliao Shiang etc had higher concentration profile in the four season (included spring, summer, fall and winter ) and during two seasons (included raining and drying) in the water supplies systems. We hope the contour map can offer a clear information of conveyer system administrator of drinking water and let administrator know where areas have high concentration produced in water quality management planning, in order to having priority or effective solutions (included washing the pipeline, changing the pipeline, changing the water flow, etc.).
|
145 |
Multiobjective optimization of contaminant sensor locations in drinking water distribution systems using nodal importance conceptsRogers, Scott W. January 2009 (has links)
Thesis (Ph.D)--Civil and Environmental Engineering, Georgia Institute of Technology, 2009. / Committee Chair: Aral, Mustafa; Committee Member: Guan, Jiabao; Committee Member: Jang, Wonyong; Committee Member: Kim, Seong-Hee; Committee Member: Uzer, Turgay. Part of the SMARTech Electronic Thesis and Dissertation Collection.
|
146 |
Chemical usage and savings at the Austin Water Utility drinking water treatment plantsDobbertien, Matthew Francis, 1988- 18 June 2012 (has links)
The goal of this research was to maintain excellent water quality at reduced chemical operations cost. Chemical usage data at the Austin water treatment plants were examined by identifying trends and investigating suspected inefficiencies. The investigation consisted in jar test experiments, plant-scale experiments, and equilibrium modeling. Lime and ferric sulfate were suspected to be added inefficiently with respect to cost while the other treatment chemicals were assessed to be added efficiently. Lime was investigated in greater depth than ferric sulfate because ferric sulfate was better characterized in its effect on finished water quality within the range of interest. The goal of lime addition is to remove hardness from the water by a process called lime softening. Hardness removal decreases corrosion in transmission lines and prevents deposition of unwanted solids in household appliances. Additionally, lime softening aids in particle removal and disinfection-by-product precursor reduction. The efficiency of lime addition was evaluated based on settled water pH and causticity goals, which serve as the operating parameters for the water treatment plants. The most efficient lime softening occurs when multiple softening goals are simultaneously achieved. First, the dissolved calcium concentration must achieve a minimum. Second, the dissolved magnesium concentration must be reduced by at least 10 mg/L as CaCO₃. Third, total alkalinity must be preserved at its maximum concentration while also achieving excellent hardness removal. Fourth, natural organic matter (NOM), which serves as a precursor for disinfection-by-products, must be removed sufficiently to achieve DBP reduction goals. Finally, the turbidity in the effluent from the settling basin must be below 2.0 NTU. Through the chemical investigation of lime based on existing scientific literature, computer modeling, jar test experiments, and full-scale testing, it was determined that the optimal condition operating condition for lime softening was a settled water pH range from 10.0 - 10.1. / text
|
147 |
Adhesion of silver nanoparticle amendments to ceramic water filtersMikelonis, Anne Marie 17 September 2015 (has links)
Silver nanoparticles (Ag NPs) are frequently added as a disinfectant to ceramic filters used for household drinking water treatment. To provide suspension phase particle stability, Ag NPs can be synthesized using a number of different molecules to cap the metal core. The goal of this doctoral work was to advance the fundamental understanding of how stabilizing agents influence the attachment and detachment of Ag NPs from ceramic water filters. To achieve this goal, deposition experiments onto Al₂O₃ membranes and clay-based ceramic filters were performed using Ag NPs stabilized by three different agents: citrate, polyvinylpyrrolidone (PVP), and branched polyethylenimine (BPEI). Laboratory and field- scale filtration experiments were also conducted to evaluate the removal of Ag NPs from ceramics under different water conditions -- the presence of hardness and natural organic matter (NOM). Citrate-stabilized Ag NPs were found to have the highest attachment densities, regardless of filter material. Differing attachment densities for the three types of Ag NPs were extensively explained using a combination of classic Derjaguin, Landau, Verwey and Overbeek (DLVO) theory, steric forces, and particle-particle interaction energy calculations. A multilevel statistical model was built to describe the removal of Ag NPs from ceramic water filters under different water conditions. The type of Ag NP was found to affect the initial release of Ag from the filters, while the interaction of the type of Ag NP and water were found to affect the rate of removal. Hardness and NOM prolonged the release of Ag from ceramic water filters.
|
148 |
Comparison of various home water treatment systems and devices for the removal of viral indicators and protozoan parasitesAdeyemo, Folasade Esther. January 2012 (has links)
M. Tech. Water Care. / Aims to evaluate promising technologies for local application in the removal of viruses and protozoan parasites and to provide guidelines for the selection and use of appropriate home water treatment systems that could be used in rural households.
|
149 |
Use of total organic carbon analyses on a wastewater treatment plantDu Toit, Wynand January 2002 (has links)
Thesis (MTech. degree inChemistry.)--Tshwane University of Technology, 2010. / Introduction: Since the establishment of relationships between BOD, COD and TOC in early 1980’s, total organic carbon (TOC) analysis has been the
analytical backbone of many water treatment laboratories (Furlong et al. 1999). It is only a question of time before South Africa follows suite, if only to
adhere to export legislation and requirements. The question is whether TOC is just another expensive analytical tool for policing effluent, or is TOC results valid criteria for monitoring pollution.
Aim: The purpose of this project was to evaluate the determination of TOC as a management tool on a wastewater treatment plant (WWTP) and compare it to the chemical oxygen demand (COD) analysis traditionally applied.
Experimental: Five sampling points throughout the wastewater treatment plant were evaluated. A possible comparison between TOC and COD was
investigated.
Sampling was done using an ISCO 3700 portable sampler at each individual sampling point. The samples were filtered and analysed for TOC in the
laboratory using an ISCO EZ 3500 TOC analyser. COD analysis was done colorimetrically by using a Hach DR 2000 photometer. Both analyses were
done according to standard methods for water and wastewater. Because the ISCO EZ 3500 TOC is an online instrument, it was evaluated at two of the
wastewater treatment plant.
Results: The analysis of TOC is a more rapid method than COD for the determination of organic load and thus has the potential for better early
warning and pollution control management.
The change in chemical composition of raw sewage made it difficult to find consistent correlation between COD and TOC results. However, it was found that an online TOC analyses was a practical alternative to COD for plant control, process management and monitoring of inflow and effluent flows in wastewater treatment plant.
Conclusion: Limitations of TOC analysis must be considered and include practical problems due to the high content of suspended solids in raw sewage and activated sludge, as well as the partial oxidation of certain organic compounds by ultra-violet/persulphate digestion.
Although COD analysis is chemically hazardous and time-consuming compared to TOC analysis, it is not likely that TOC will replace COD on the
WWTP, due to historical data accumulation, practicality and people’s natural opposition to change. However, it is hoped that the results of this study will
increase knowledge about TOC and be used for practical implementation where this technique has advantages over COD
|
150 |
Kinetics of ciprofloxacin degradation by ozonation : effects of natural organic matter, the carbonate system, and pHMarron, Corin Ann 21 December 2010 (has links)
The presence of pharmacologically active and persistent compounds in drinking water sources is an environmental and public health concern. Sources of pharmaceuticals in the aquatic environment include wastewater treatment plant effluents and veterinary use. Antibiotics are of special concern because of their role in the spread of bacterial resistance. Conventional drinking water treatment processes are often ineffective for removing trace organic contaminants. Ozonation processes have demonstrated the ability to remove pharmaceutical compounds from drinking water supplies. During the ozonation of drinking water, the primary oxidants are ozone and hydroxyl radicals formed during the decomposition of ozone. Both oxidants contribute to the removal of pharmaceutical compounds; however, the relative rates of destruction by these two oxidants depends on the treatment operating conditions, the background water chemistry and the structure and reactivity of the target compound. This study investigated the relative impact of natural water characteristics, such as pH, the carbonate system, and natural organic matter, on the removal of the fluoroquinolone antibiotic ciprofloxacin by ozonation processes. Rate constants for k"O3, Cip obtained at pH 7 were approximately one order of magnitude higher than at pH 5 because ciprofloxacin changes from a positively charged cation to a neutral species over this pH range. The results showed that there was very little variation of the rate constants for ciprofloxacin oxidation by O₃ or hydroxyl radicals regardless of the carbonate concentration or the presence of the two organic matters studied in this research. Typical values for k"O3, Cip and k"HO°, Cip obtained at pH 7 ranged between 1.49x10⁴ and 1.64x10⁴ M⁻¹s⁻¹ and 1.29x10¹⁰ to 1.80x10¹⁰ M⁻¹s⁻¹, respectively. However, the presence of carbonate and other hydroxyl radical scavengers did have an impact on O₃ and hydroxyl radical exposure. The relative impact of these two oxidants changed depending on the pH of the system and the presence of carbonate and natural organic matter. / text
|
Page generated in 0.0642 seconds