Spelling suggestions: "subject:"widefield imaging"" "subject:"widerfield imaging""
1 |
Multimodal Optical Imaging for Detection of Cervical NeoplasiaBubi, Tefo 16 September 2013 (has links)
Despite being the most preventable cancer, cervical cancer remains the third leading cause of cancer death worldwide. Over 85% of cervical cancer incidence and mortality occurs in low-resource countries where screening programs for early detection are either inadequate or unavailable. In the developed world, where screening programs are well organized, incidence and mortality rates are greatly reduced. Recent advances in optical imaging have the potential to enable cervical cancer screening at the point-of-care, even in the hands of less experienced providers. High performance optical imaging systems can be constructed at relatively low cost, and image analysis can be automated; thus, these technologies may provide a way to bridge the gap to cervical cancer screening for developing countries. This work focuses on the design, construction, and clinical testing of a novel multimodal optical imaging (combination of wide-field imaging and high-resolution) for early detection of cervical neoplasia.
The Multimodal Digital Imager (MDI) acquires in vivo images of cervical tissue in fluorescence, narrow band reflectance, and orthogonal polarized reflectance modes using multiple illumination wavelengths. The High Resolution Microendoscope (HRME) was used to interrogate clinically suspicious areas with subcellular spatial resolution, revealing changes in nuclear to cytoplasmic area ratio.
In vivo image data from the wide-field system was combined with image data from a high- resolution microendoscope (HRME) in order to test the effectiveness of the multimodal optical imaging in discriminating between cervical neoplasia and non-neoplastic. Multimodal optical imaging coupled with computer aided diagnostic achieved a sensitivity of 82% and specificity of 85% for discriminating cervical neoplastic from non-neoplastic
This work has demonstrated that multimodal optical imaging; combination of wide-field and high-resolution optical imaging of the cervix can assist in the detection of cervical neoplasia and can be implemented effectively in a low-resource setting.
|
2 |
Automatic Segmentation of Single Neurons Recorded by Wide-Field Imaging Using Frequency Domain Features and Clustering TreeJanuary 2016 (has links)
abstract: Recent new experiments showed that wide-field imaging at millimeter scale is capable of recording hundreds of neurons in behaving mice brain. Monitoring hundreds of individual neurons at a high frame rate provides a promising tool for discovering spatiotemporal features of large neural networks. However, processing the massive data sets is impossible without automated procedures. Thus, this thesis aims at developing a new tool to automatically segment and track individual neuron cells. The new method used in this study employs two major ideas including feature extraction based on power spectral density of single neuron temporal activity and clustering tree to separate overlapping cells. To address issues associated with high-resolution imaging of a large recording area, focused areas and out-of-focus areas were analyzed separately. A static segmentation with a fixed PSD thresholding method is applied to within focus visual field. A dynamic segmentation by comparing maximum PSD with surrounding pixels is applied to out-of-focus area. Both approaches helped remove irrelevant pixels in the background. After detection of potential single cells, some of which appeared in groups due to overlapping cells in the image, a hierarchical clustering algorithm is applied to separate them. The hierarchical clustering uses correlation coefficient as a distance measurement to group similar pixels into single cells. As such, overlapping cells can be separated. We tested the entire algorithm using two real recordings with the respective truth carefully determined by manual inspections. The results show high accuracy on tested datasets while false positive error is controlled within an acceptable range. Furthermore, results indicate robustness of the algorithm when applied to different image sequences. / Dissertation/Thesis / Masters Thesis Electrical Engineering 2016
|
3 |
Optimizing The Performance Of As-manufactured Grazing Incidence X-ray Telescopes Using Mosaic Detector ArraysAtanassova, Martina 01 January 2005 (has links)
The field of X-ray astronomy is only forty (43) years old, and grazing incidence X-ray telescopes have only been conceived and designed for a little over fifty (50) years. The Wolter Type I design is particularly well suited for stellar astronomical telescopes (very small field-of-view). The first orbiting X-ray observatory, HEAO-1 was launched in 1977, a mere twenty-eight (28) years ago. Since that time large nested Wolter Type I X-ray telescopes have been designed, build, and launched by the European Space Agency (ROSAT) and NASA (the Chandra Observatory). Several smaller grazing incidence telescopes have been launched for making solar observations (SOHO, HESP, SXI). These grazing incidence designs tend to suffer from severe aberrations and at these very short wavelengths scattering effects from residual optical fabrication errors are another major source of image degradation. The fabrication of precision optical surfaces for grazing incidence X-ray telescopes thus poses a great technological challenge. Both the residual "figure" errors and the residual microroughness or "finish" of the manufactured mirrors must be precisely measured, and the image degradation due to these fabrication errors must be accurately modeled in order to predict the final optical performance of the as manufactured telescope. The fabrication process thus consists of a series of polishing and testing cycles with the predictions from the metrology data of each cycle indicating the strategy for the next polishing cycle. Most commercially available optical design and analysis software analyzes the image degradation effects of diffraction and aberrations, but does not adequately model the image degradation effects of surface scatter or the effects of state-of-the-art mosaic detectors. The work presented in this dissertation is in support of the Solar X-ray Imager (SXI) program. We have developed a rigorous procedure by which to analyze detector effects in systems which exhibit severe field-dependent aberrations (conventional transfer function analysis is not applicable). Furthermore, we developed a technique to balance detector effects with geometrical aberrations, during the design process, for wide-field applications. We then included these detector effects in a complete systems engineering analysis (including the effects of diffraction, geometrical aberrations, surface scatter effects, the mirror manufacturer error budget tree, and detector effects) of image quality for the five SXI telescopes being fabricated for NOAA's next generation GOES weather satellites. In addition we have re-optimized the remaining optical design parameters after the grazing incidence SXI mirrors have been imperfectly fabricated. This ability depends critically upon the adoption of an image quality criterion, or merit function, appropriate for the specific application. In particular, we discuss in detail how the focal plane position can be adjusted to optimize the optical performance of the telescope to best compensate for optical figure and/or finish errors resulting from the optical fabrication process. Our systems engineering analysis was then used to predict the increase in performance achieved by the re-optimization procedure. The image quality predictions are also compared with real X-ray test data from the SXI program to experimentally validate our system engineering analysis capability.
|
4 |
Imaging Of Metal Surfaces Using Confocal Laser Scanning MicroscopyYildiz, Bilge Can 01 September 2011 (has links) (PDF)
Optical imaging techniques have improved much over the last fifty years since the invention of the laser. With a high brightness source many imaging applications which were once inaccessible to researchers have now become a reality. Among these techniques, the most beneficial one is the use of lasers for both wide-field and
confocal imaging systems.
The aim of this study was to design a laser imaging system based on the concept of laser scanning confocal microscopy. Specifically the optical system was based on optical fibers allowing the user to image remote areas such as the inner surface of rifled gun barrels and/or pipes with a high degree of precision (+/- 0.01 mm). In order to build such a system, initially the theoretical foundation for a confocal as well as a wide-field imaging system was analyzed. Using this basis a free-space optical confocal system was built and analyzed. The measurements support the fact that both the objective numerical aperture and pinhole size play an important role in the radial and axial resolution of the system as well as the quality of the images obtained.
To begin construction of a confocal, optical-fiber based imaging system first an all fiber wide-field imaging system was designed and tested at a working wavelength of 1550 nm. Then an all fiber confocal system was designed at a working wavelength of 808 nm. In both cases results showed that while lateral resolution was adequate, axial resolution suffered since it was found that the design of the optical system needs to take into account under-filling of the objective lens, a result common with the use of laser beams whose divergence is not at all like that of a point source.
The work done here will aid technology that will be used in the elimination process of faulty rifling fabrication in defense industry. The reason why the confocal technique is preferred to the conventional wide-field one is the need for better resolution in all directions. Theoretical concepts and mathematical background are discussed as well as the experimental results and the practical advantages of such a system.
|
5 |
Deep observations of the GOODS-North field from the e-MERGE surveyWrigley, Nicholas Howard January 2016 (has links)
The Great Observatories Origins Deep Survey North (GOODS-N) field, first surveyed by the HST, has been observed across numerous wavebands revealing populations of both Star Forming Galaxies (SFG) and Active Galactic Nuclei (AGN) over wide ranges of luminosities. It has been surmised that the evolution in the star forming population appears to diverge from that in the AGN population leading to a domination of SFGs at low flux densities. The number of starbursts can only be disentangled from the entire population if each source can be classified individually, which usually requires high angular resolution imaging. This is the motivation behind the e-MERLIN Galaxy Evolution survey, e-MERGE, which expands the depth of high resolution radio imaging in the GOODS-N field to increase the number of potentially classifiable sources. By use of wide-field imaging techniques, including a new high-speed mapping tool, together with a new semi-empirical primary beam-shape model for the e-MERLIN array, a deep wide-field high-resolution map is derived. This is the widest and deepest contiguous imaging yet obtained from e-MERLIN and JVLA observations, and yet contains less than 25% of the e-MERLIN data so far observed. The majority of the objects are shown to exhibit extended structure, and the angular size distribution place the median size around 1.2 arcsec, peaking between 0.5 and 0.7 arcsec. Automated algorithms are utilised to facilitate a new probabilistic classification tool based on multi-parameter correlations. 248 sources could be classified using the tool, each deriving a probability of AGN or SFG rather than forcing a binary category. Linear sizes of star-formation dominated sources are determined to lie in a range of 4 - 11 kpc, within the optical extent of galaxies. Differential source counting based on probabilistic classifications reveals that an increase in the luminosity evolution of SFGs is likely, although an apparent upturn in AGN may also exist to some lesser degree at low flux densities. The thesis establishes a clear roadmap for the remainder of the e-MERGE survey and a path to determine the star formation rate history of the Universe.
|
6 |
Autonomous Raman Hyperspectral Imaging and Analysis; Advances Towards Mapping Crystalline Character in Biologically Important PolymersAlkhalifa, Sadeq H. January 2022 (has links)
No description available.
|
Page generated in 0.0612 seconds