Yes / A novel wideband printed monopole antenna is proposed covering frequency spectrum of wireless local area network (WLAN) and the Worldwide Interoperability for Microwave Access (WiMAX). The total antenna size is 30 × 48 × 1.6 mm³ in which it consists of a G-shaped slotted printed antenna and a defected ground plane. Theoretical and experimental characteristics are presented and compared. The antenna yields an achieved impedance bandwidth of 95.1% between 2.374 GHz and 6.682 GHz at a reflection coefficient |S11| ≤ -10 dB.The results including S-parameters, surface current distribution, VSWR, radiation patterns and antenna gains; in addition to a reasonable and stable radiation pattern and power gain.

No description available.

Localization is one of the most interesting research areas in wireless networks. It is mostly used for tracking and monitoring applications such as traffic monitoring, search and rescue, navigation and so on. A good quality system can be defined from its accuracy when operating in severe interference environments that contaminate the signals and therefore reduce the system performance. The main issue for localization is channel propagation, e.g., line of sight or non-line of sight channel which should be studied in order to improve the system efficiency.    In order to perform a localization, most algorithms use two steps: ranging and positioning. For ranging, the two popular techniques that are widely used for distance measurement are received signal strength (RSS) and time of arrival (TOA). RSS ranging technique uses the power of the received signals to identify the distance between a transmitter and a receiver. TOA ranging technique uses time of the signal traveling between a transmitter and a receiver to identify the distance, thus it requires synchronization. The measurements are processed by using a localization algorithm afterwards. However, these techniques suffer from multipath fading and other errors, so there always exists error in the estimated position.    In this thesis, TOA ranging technique is used for different estimation methods. Simulation results are performed using MATLAB, while the real results are obtained from Pozyx indoor positioning platform. Several estimation algorithms comprising of maximum likelihood (ML), linearized least square (LLS), weighted centroid (WC), and fingerprinting (FP) are studied in detail. The testing area is indoor environment which is suitable for LOS, NLOS and combined situations. The measured data is then used for ranging and localization. We concentrate on comparing and discussing these results in this thesis.

This thesis discusses microstrip circuits and components with a slotted area on the ground plane. In recent years, various slot geometries have been placed on the ground plane with the purpose of reducing harmonics, producing frequency pass/stop-bands, and enhancing coupling effects. Among several ground slot geometries, a dumbbell shaped slot (DSS) is attractive because of its simple structure and easy analysis. The DSS and its applications to RF/microwave filters are studied and discussed. A lumped equivalent circuit model of the dumbbell shaped ground slot is introduced by utilizing resonator and filter theories. The accuracy of the equivalent circuit model is demonstrated through the comparison of circuit simulations and measurements. A lowpass filter (LPF) using slotted ground structure (SGS) with dumbbell shape is designed and measured to validate its theories. By using SGS techniques presented in this thesis, some other RF/microwave components such as a periodic structure, ultra-wideband bandpass filter (UWB-BPF), and rectenna with SGS-LPF are designed and tested.

This thesis discusses microstrip circuits and components with a slotted area on the ground plane. In recent years, various slot geometries have been placed on the ground plane with the purpose of reducing harmonics, producing frequency pass/stop-bands, and enhancing coupling effects. Among several ground slot geometries, a dumbbell shaped slot (DSS) is attractive because of its simple structure and easy analysis. The DSS and its applications to RF/microwave filters are studied and discussed. A lumped equivalent circuit model of the dumbbell shaped ground slot is introduced by utilizing resonator and filter theories. The accuracy of the equivalent circuit model is demonstrated through the comparison of circuit simulations and measurements. A lowpass filter (LPF) using slotted ground structure (SGS) with dumbbell shape is designed and measured to validate its theories. By using SGS techniques presented in this thesis, some other RF/microwave components such as a periodic structure, ultra-wideband bandpass filter (UWB-BPF), and rectenna with SGS-LPF are designed and tested.

No description available.

Thesis (Ph. D.)--Oregon State University, 2007. / Printout. Includes bibliographical references (leaves 112-117). Also available on the World Wide Web.

Thesis (M.S.)--Oregon State University, 2006. / Printout. Includes bibliographical references (leaves 58-59). Also available on the World Wide Web.

No description available.

No