Spelling suggestions: "subject:"winder""
11 |
Origin and Architecture of Deep-water Levee Deposits: Insight from the Ancient Rock Record and ExperimentsKhan, Zishann 22 December 2011 (has links)
Although levee deposits make up a significant part of modern and ancient deep-marine slope systems, details of their internal lithological composition and stratal architecture remain poorly documented. At the Castle Creek study area, strata of the Neoproterozoic Isaac Formation (Windermere Supergroup) crop out superbly in a kilometre-scale section through a sinuous deep-water channel-levee system (ICC3).
Levee deposits near the outer bend of the channel consist of sandstone-rich (sandstone-to-mudstone ratio of 68:42), medium- to thick-bedded turbidites interstratified with thinly-bedded turbidites. Structureless sandstone (Ta), planar laminated sandstone (Tb), non-climbing ripple cross-stratified sandstone (Tc) and massive and laminated siltstone (Td) are common. Thick beds generally thicken and then thin and fine laterally over about 300 m. Thin-bedded strata, in contrast, thin and fine negligibly over similar distances. In the distal part of the outer-bend levee (up to 700 m laterally away from the channel) strata consist predominantly of thin-bedded Tcd turbidites with a much lower sandstone-to-mudstone ratio (35:65). On the opposite side of the channel, inner-bend levee deposits are mudstone-rich, locally as low as 15:85, and consist mostly of thin-bedded, Tcd turbidites, although thicker-bedded, Ta-d turbidites are more common in the lower part of the section. Lateral thinning and fining of beds is more rapid than their outer-bend counterpart.
Levee deposits of ICC3 comprise three stacked decametre-scale upward-thinning and -fining successions. Each is interpreted to record a depositional history consisting of lateral channel migration, levee deposition, channel filling, and distal levee deposition. During the early stage of increasing levee relief it is proposed that the termini of individual beds progressively backstep towards the channel margin resulting in an overall lateral thinning of the stratal profile. This interpretation notably contrasts the common assumption that levee morphology is the result of the vertical stacking of beds that dip.
In addition to field studies, laboratory experiments were conducted to determine the depositional threshold of non-climbing ripple cross-stratification, which is common in levee strata of ICC3. It was determined that non-climbing ripples form when bed aggradation rates are less than 0.015 cm/sec, and most probably in flows made up of poorly sorted sediment.
|
12 |
Stratigraphic and Carbon Isotope Evolution of an Ediacaran Mixed Siliciclastic Deep-Marine Base-of-Slope System, First Isaac Carbonate, Windermere Supergroup, Canadian Cordillera, British Columbia.Cochrane, Dylan 04 April 2018 (has links)
The first Isaac carbonate (FIC) is a mixed siliciclastic-carbonate base-of-slope succession in the Neoproterozoic Windermere Supergroup (WSG). Outstanding outcrop exposure at three study areas provided an excellent opportunity to observe the stratigraphic and isotopic evolution of an ancient deepwater mixed turbidite system. Based on lithological and stratal dimensions, the FIC can be subdivided into lower and upper parts suggesting temporal changes in patterns of sediment transport and deposition. δ13Ccarb also changes from -5.2‰ at the base of the FIC to 2.5‰ in the middle and then decreases to -6.3‰ at the top. Notably, the δ13Ccarb of primary cement in FIC strata is substantially more positive than most other Neoproterozoic deep-marine sections, suggesting the retention of their original shallow-marine isotopic signature. Nevertheless, this trend potentially correlates with the EN2 excursion in China and therefore the Gaskiers glaciation (~580 Ma), although better age control of WSG is needed to corroborate this correlation.
|
13 |
Origin and Architecture of Deep-water Levee Deposits: Insight from the Ancient Rock Record and ExperimentsKhan, Zishann January 2012 (has links)
Although levee deposits make up a significant part of modern and ancient deep-marine slope systems, details of their internal lithological composition and stratal architecture remain poorly documented. At the Castle Creek study area, strata of the Neoproterozoic Isaac Formation (Windermere Supergroup) crop out superbly in a kilometre-scale section through a sinuous deep-water channel-levee system (ICC3).
Levee deposits near the outer bend of the channel consist of sandstone-rich (sandstone-to-mudstone ratio of 68:42), medium- to thick-bedded turbidites interstratified with thinly-bedded turbidites. Structureless sandstone (Ta), planar laminated sandstone (Tb), non-climbing ripple cross-stratified sandstone (Tc) and massive and laminated siltstone (Td) are common. Thick beds generally thicken and then thin and fine laterally over about 300 m. Thin-bedded strata, in contrast, thin and fine negligibly over similar distances. In the distal part of the outer-bend levee (up to 700 m laterally away from the channel) strata consist predominantly of thin-bedded Tcd turbidites with a much lower sandstone-to-mudstone ratio (35:65). On the opposite side of the channel, inner-bend levee deposits are mudstone-rich, locally as low as 15:85, and consist mostly of thin-bedded, Tcd turbidites, although thicker-bedded, Ta-d turbidites are more common in the lower part of the section. Lateral thinning and fining of beds is more rapid than their outer-bend counterpart.
Levee deposits of ICC3 comprise three stacked decametre-scale upward-thinning and -fining successions. Each is interpreted to record a depositional history consisting of lateral channel migration, levee deposition, channel filling, and distal levee deposition. During the early stage of increasing levee relief it is proposed that the termini of individual beds progressively backstep towards the channel margin resulting in an overall lateral thinning of the stratal profile. This interpretation notably contrasts the common assumption that levee morphology is the result of the vertical stacking of beds that dip.
In addition to field studies, laboratory experiments were conducted to determine the depositional threshold of non-climbing ripple cross-stratification, which is common in levee strata of ICC3. It was determined that non-climbing ripples form when bed aggradation rates are less than 0.015 cm/sec, and most probably in flows made up of poorly sorted sediment.
|
14 |
Vertical and Lateral Facies Architecture of Levees and Their Genetically-Related Channels, Isaac Formation, Neoproterozoic Windermere Supergroup, Cariboo Mountains, B.C.Bergen, Anika January 2017 (has links)
At the Castle Creek study area, levee deposits are well-exposed over an area of ~2.6 km wide and ~90 m thick. This provides an opportunity to describe their lateral and vertical lithological changes, and accordingly details about their reservoir geometry and stratal continuity. Here, levee deposits are divided vertically into packages, each consisting of a sand-rich lower part overlain sharply by a mud-rich upper part. Each lower part displays a consistent thickening then thinning trend laterally away from its genetically related channel. The characteristics of these packages suggest that they were controlled by recurring changes in the structure of channellized flows, which in turn was controlled by grain size and grain sorting. This ultimately was controlled by short-term changes in relative sea level. Moreover, some mud- and sand-rich strata are rich in residual carbon suggesting that mid-fan levees can serve as source rocks for hydrocarbon generation, and also reservoirs.
|
15 |
Sedimentology, Stratigraphy, Architecture and Origin of Deep-water, Basin-floor Deposits: Middle and Upper Kaza Group, Windermere Supergroup, B.C., CanadaTerlaky, Viktor January 2014 (has links)
Ancient basin-floor strata are exceptionally well exposed in the Neoproterozoic Windermere Supergroup in the southern Canadian Cordillera. Data from the Castle Creek outcrop, where strata of the upper Kaza Group crop out, and the Mt. Quanstrom outcrop, where the middle Kaza is exposed, form the main dataset for this study. The aim of this study is to describe and interpret the strata starting at the bed scale, followed by stratal element scale, lobe scale and ultimately fan scale.
Strata of the Kaza Group comprise six sedimentary facies representing deposition from a variety of fluid and cohesive sediment gravity flows. These, in turn, populate seven stratal elements that are defined by their basal contact, cross-sectional geometry and internal facies distribution. The lithological characteristics of stratal elements vary little from proximal to more distal settings, but their relative abundance and stacking pattern do, which, then, forms the basis for modeling the internal architecture of lobes.
Lobes typically comprise an assemblage of stratal elements, which then are systematically and predictably arranged in both space (along a single depositional transect) and time (stratigraphically upward). Lobes typically became initiated by channel avulsion. In the proximal part of the system scours up to several meters deep, several tens of meters wide are interpreted to have formed by erosion downflow of the avulsion node. Erosion also charged the flow with fine-grained sediment and on the lateral margins and downflow avulsion splays were deposited. Later flows then exploited the basin-floor topography and on the proximal basin-floor carved a feeder channel, which then fed a downflow depositional lobe. At the mouths of feeder channels flows became dispersed through a network of distributary channels that further downflow shallow and widen until eventually merging laterally in sandstone-rich terminal splays. During the lifespan of a single lobe the feeder channel remains fixed, but the distributary channel network and its associated terminal splays wander, causing them to stack and be intercalated laterally and vertically. Eventually an upstream avulsion terminates local sediment supply, causing a new lobe to be initiated elsewhere on the fan, and the process repeats.
|
16 |
Stratigraphic Architecture and Depositional History of Laterally-accreted Channel Fills in the Lower Isaac Formation, Windermere Supergroup, British Columbia, CanadaDumouchel, Iain January 2015 (has links)
Continental slope channels, which serve as the primary conduits for sediment transport into the deep marine, occasionally become sites of sediment deposition with excellent reservoir potential. Increasingly reported in the literature are subsurface channel fills exhibiting shingled seismic reflectors that are interpreted to have formed by lateral channel migration. In lower Isaac Formation channels inclined strata are observed but at a lateral scale that is far below industry-seismic detection. Distinctively these flat-based channels are filled with coarse-grained sandstone that transitions abruptly and obliquely upwards into thin, fine grained turbidites. Like rivers, lateral accretion in Isaac channels is interpreted to be the result of the interaction of inertial and pressure forces, but in highly turbulent, highly density-stratified turbidity currents. This resulted in the formation of two superimposed secondary circulation cells that caused enhanced erosion on the outer bank and preferential deposition of coarse-grained sediment along the inner bank.
|
17 |
Stratigraphic Architecture, Depositional Processes and Reservoir Implications of the Basin Floor to Slope Transition, Neoproterozoic Windermere Turbidite System, CanadaNavarro Ugueto, Lilian Leomer January 2016 (has links)
Deep-water strata of the Neoproterozoic Kaza Group and Isaac Formation (Cariboo Group) in the southern Canadian Cordillera (B.C.) were deposited in a passive-margin basin during the break-up of supercontinent Rodinia. At the Castle Creek and Mount Quanstrom study areas, a remarkably continuous stratigraphic interval throughout these units preserves a record of basin-floor overlain by strata deposited in the lowermost part of the slope. Although similar stratal intervals have been described from ancient and modern deep-marine settings, they still remain poorly understood.
Three main stratal units are recognized within the study areas. The lower unit consists of three channel-lobe systems formed in the basin floor to slope transition. Uniquely, siliciclastic-dominated strata here consist of a variety of small- and few large-scale scour elements, indicating transport bypass along the channel-lobe transition zone, in addition to detached or attached depositional lobes composed mostly of distributary channels, fine-grained deposits, and uncommon splays, and a rare slope leveed channel complex. The middle unit is a siliciclastic-dominated succession of stacked, km-scale mass-transport deposits (i.e. debrites and slides), which indicates the more frequent emplacement of increasingly larger mass failures on a prograding slope, and are overlain by fine-grained, splay deposits that are successively overlain by channel, ponded and fine-grained deposits. In contrast, the upper unit is a mixed siliciclastic-carbonate slope succession of the first Isaac carbonate, a regional marker horizon that comprises mostly carbonate-rich and siliciclastic-rich fine-grained strata intercalated with channel and gully complexes that are mostly filled with coarser-grained strata.
Abrupt changes in facies trends, stratal stacking patterns and depositional styles throughout these units are largely linked to long-term changes in relative sea level and its control on sediment supply, namely sediment caliber, volume and mineralogy. Notably, in the upper unit, small-scale changes in sediment source and supply are related to shorter sea-level variations superimposed on the long-term eustatic change.
|
Page generated in 0.3443 seconds