This thesis deals with heating system in accommodation facility. It clarifies the way of controlling multiple decentralized systems which results in automatization of the whole heating system. Heating distrubition into individual zones is controlled by central server which communicates with reservation system of accommodation facility. The main goal is to lower expenses for heating.

This diploma thesis deals with a proposal and a comparison of several options of transportation planning in the shopping area in the urban area of the town of Modřice, which is enlarging due to the building-up of new commercial centres. The first part of the thesis consists of a treatise on the field of traffic engineering, road-traffic telematics and ITS. The core of the work is formed by a detailed analysis of the current state and calibration of the transport simulation system AIMSUN. The following part shows three different ways of transportation in the given area and all of them include a model of the particular area made in the program AIMSUN and an elaborate analysis of the proposed solution. In the last part of the work all the proposed solutions are compared according to the results gained from the AIMSUN model.

This work is specialized on problems accumulation electricity power from renewable sources and production electricity power from renewable sources for select object. First part describes renewable sources and their use in our conditions. Second part is specialized on accumulators specific for renewable sources. Third part compare to production electricity power from photovoltaic power station and windy power station and their combination for select object. Further accumulation these select sources. Final fourth part describe about their comparison from position how of technical so economic.

The scope of this diploma thesis is feasibility study of enlargement the current energy source by new technological equipment designed for heat and electric energy production. Technological equipment is designed regarding to capital costs and minimum enviromental effects. In the thesis is described most important aspects for successful design new biomass energy source. The result can be used for investor´s decision making about determination toward investment.

In the master's thesis, there has been described and explained the principle of operation of the second generation coherence controlled holographic microscope (CCHM2) designed at the Brno University of Technology. There has also been listed theoretical description of the operation of the optical trap, together with the calculation of the forces acting on it, ways of measuring the stiffness of the optical trap and the principle of~creating a time-shared optical traps. The optical tweezers forming a separate module connectable to CCHM2 was designed. Simulation and optimization of parameters of the optical system, mechanical design, manufacturing documentation, current source to power the laser diode which allows to control the diode output power by the controller card connected to the PC was designed. The galvano-optics mirror angle is controlled by the PC card too. The optical tweezer has been designed, manufactured and tested in conjunction with the CCHM2.

V diplomové práci je krok po kroce vypracováno řešení zabezpečení energetického zdroje pro typické město v Sibiřské oblasti. Data, která tvoří zadání, byla získána od zákazníka pomocí dotazníku, protože pro nás oblast v čase vypracování nebyla dostupná. Na základě informací o aktuální energetické situaci, obyvatelstvu a dřevospracujícímu průmyslu je vybrána vhodná technologie pro zabezpečení tepla a elektrické energie. Druh zdroje byl vybrán dle dostupného paliva a následně byl proveden výpočet a design en- ergetického zdoje založeného na Rankine Clausiovém cyklu. Řešení obsahuje technický i ekonomický návrh. Technické řešení ukázalo, že nejdůležitější parametry jsou spolehlivost, bezpečnost a jednoduchost řešení. Design sítí, přídavných zařízení a plánování údržby není obsahem této práce. O dalších projektových krocích pojednává závěr.

The aim of this thesis is to design the heating system for the house, including the design and calculating the required quantity of heat for hot water. The specified heat sources are the heat pump air to water and solid fuel boiler. The task was to design the heating system to the fastest possible return on investment. The initial investment in a heat pump is high so it is necessary to design the heating system as efficiently as possible. The thesis contains a complete project of calculating heat loss of the building, the design of heating surfaces and their heat-technical calculation. There is included the design of the pipe system, the calculation of pressure loss and its regulation. The thesis also includes design of safety equipment, temperature regulation and drawings. On the basis of calculated data was processed economic assessment, which determines the return on investment to the heat pump. Compared to the gas condensing boiler the return on investment will ideally be after five years.

Diploma thesis deals with change of heating source for a block of flats with aim to reduce heating costs. Thesis contains calculations of energy requirements of house, including requirements for heating and domestic hot water preparation. Several ways of heating by a heat pump were designed based on the calculated values. Each variant of the designed heating system is compared with current operational costs. Possible cost economies and maximum value of investment costs of the heating system were assessed

This master’s thesis deals with the design of the ventilation and heating system in low-energy single family house. The thesis is divided into three parts. The first part of the thesis provides an overview of the project together with the requirements of the house owner. The options for heating and ventilation in low-energy buildings are also discussed in this part. The second part deals with the design of the ventilation system with heat recovery. The design includes determination of the amount of ventilation air, selection of a suitable ventilation unit and the design of the supply air and return air ductworks. The last part focuses on the heating system. It includes the calculations of the heat loss of the house and design of floor heating. Furthermore, the selection of heat source together with the safety measures is described in this part. Both design parts include the bills of materials, along with the budget and the drawings.

This master’s thesis deals with the possibilities of illumination of motor vehicles. Thesis is divided into two sections, from which the first discusses precisely the possibilities of lighting of motor vehicles at the present time. What are the modern lighting techniques, that can be found on the market and what is their impact on safety enhancement in road traffic. Second section is about the practical measurement of low and high beam afterglow. This measurement is being compared between two types of headlamps, namely halogen headlights and xenon headlights. Part of the measurement is as well measurement of illumination intensity precisely for these headlights. The output of measurement is the creation of own illumination intensity diagrams and afterglow diagrams of particular headlights, in comparison to isolux diagrams provided by the headlights manufacturer. Consequently are solved the issues about utilization of the isolux diagrams in expert praxis.