This paper describes the simulation of the motion of a sound source in space with several speakers. It deals mainly with the study and subsequent implementation of events necessary for simulating the motion of the virtual sound source. The theoretical part is therefore concerned with finding these phenomena and with their description. Mainly that means description of panning of the sound and of the Doppler effect. In the following practical part of the work, the previously described phenomena are applied into Matlab. In the created interface , it is then possible to select the parameters of the simulation, such as the trajectory of the motion of the virtual sound source, the number of the points of the trajectory, etc. Analyses of the generated signal are then made of the selected referential parameters of the simulation.

This project deals with portal-type CNC milling machine design and construction. CNC milling machine should be able to machining light metals and alloys. This document contains description of mechanical components selection, machine frame design and building, design and construction of USB motion control unit and also contains control software description and user manual.

The thesis deals with the design and practical realization of class D audio power amplifier with microprocessor controlling. The first part describes the integrated circuits used in a preamplifier and his complete design with a description of the control program for ATmega128 microcontroller. The following part describes an integrated power amplifier TAS5613 and his circuits. The next section describes a switching power supply design using integrated circuit TOP261EN. The last section describes measurements of parameters of individual parts of the amplifier.

The aim of my master’s thesis is the design of the LED lighting system for breeding and growing purposes as replacement for the classical high-pressure sodium lamps and other sources of light used today. The whole system can be controlled locally by buttons or remotely by web server using Ethernet interface. LEDs are powered by five-channel step-down converter with current feedback. Converters are controlled by pulse width modulation generated by microcontroller.

This thesis is about to introduce the development of switched power supply with output voltage of 5,5 kV and power of 4,3 kW. This thesis directly follows the outputs of two previous semester projects. Main task is about to finish the development of remaining printed circuit boards and perform launching of all parts of developed power supply. Next necessary task is about to assemble a functional prototype of the supply using the developed parts, performing a series of measurement supply’s parameters and creating of technical documentation of mechanical part. There are all stages of supply’s development included in this thesis. From the first part, that describes various types of converters, through the design of all the supply’s parts, to final implementation of functional prototype. There are the results of measurement supply’s parameters at the end of this thesis.

This thesis deals with the issue of switching power supply in terms of noise ratios in the output voltage. In the theoretical part analyzes the basic principle of classical and resonant topology switching power converters in terms of output voltage ripple and switching noise. There are also some possibilities of compensation to minimize switching noise and output ripple. The second part describes the custom design a low noise switching power supply, which is composed of an active power factor corrector, power converters and ripple limiter. The main power converter is designed as an LLC resonant converter. The last part deals with the actual construction of the proposed source, its measurement and presentation of the results.

The aim of the diploma thesis was to design active loudspeakers. The project contains the final solution of the designed loudspeakers that have a digital input of the multichannel audio signal with both sided data communication. In the work, there are also created circuits for processing an audio signal with a following amplification for the loudspeakers. Added functions are an infra acceptor for a remote control and binary outputs for assistant functions - a control of the motor and an indication via LED diodes.

Laboratory push – pull switching power supply with symetrical output 2x0-30 V/5 A, primarily through adjustable controls (buttons, rotary encoder position) and then displayed on the alphanumeric LCD display. Management and communication device between the user and the power supply of the microcontroller ATmega32 - 16PU.

This thesis deals with the establishment of zinc ions at the positive electrode of nickel-zinc batteries. The aim of the study was to measure the impedance characteristics of the positive electrode in various states of charge and observing the effect of ZnO on the changes of impedance spectra. The theoretical part is focused on nickel hydroxide as a construction material for positive electrode and its behavior during cycling in the electrolyte. The experimental part describes in detail the manufacture of the electrode system and the preparation of electrolytes with different degrees of saturation with zinc oxide. The cells were cycled and measured using impedance spectroscopy. The measured impedance curves were simulated with equivalent circuits for a better understanding of the ongoing processes.

This thesis deals with load flow calculation of electrical network 110 kV before and after the connection to the 70MW gas supply and the 58MW steam and gas supply. This grid can be powered from two 400/110kV substations, namely Sokolnice and Otrokovice. The load flow calculation is realized for the power supply either from Otrokovice or Sokolnice. Furthermore, the calculation of the uni-phase and three phase short circuits in the substations of 110kV network is realized in this thesis. The result of the thesis is the assessment of the voltage ratio in the network, current load of the power line and short circuit resistance of the substations.