The diploma thesis deals with acoustics with the main focus on acoustic emissions of buildings. The first part of the thesis aims to familiarize the reader with the field of acoustics as a whole. They will learn the basic concepts, quantities and relations that exist in acoustics. In the second part I focus specifically on the sources of noise in buildings and their surroundings, how can excessive noise affect health, what standards must be met and how to prevent excessive noise. The last part is devoted to practical measurements in the field, which is focused on real sources of noise in the city of Brno. The aim of this measurement is to compare the noise generated by buildings with other noises in the urban environment.

This work deals with the design of a galvanically isolated converter of continuous analog signals and the design of a galvanically separated converter of digital TTL signals to HTL signals. The device is complemented by a STM32 microprocessor, which ensures the connection of analog input and output. The result of the work is the circuit structure of individual units, the results of simulations of important units, complete data for the production of device and measured values of individual units.

This master's thesis deals with the search of commercially available luminance analysers and cameras that use the measurement of correlated colour temperature. It also deals with calculations of correlated colour temperature according to various available methods. The luminance analyser LDA-LumiDISP is based on a DSLR camera. The principle of its operation and possible errors in capturing pictures are discussed here. The work deals with extensive testing of the LDA-LumiDISP luminance analyser, which is primarily intended for measuring luminance in the set scene, but can also be used to measure the correlated colour temperature. The device is being tested in terms of measuring the correlated colour temperature in laboratory and field conditions. The result of the master's thesis is the calculation of measurements uncertainty for certain light sources and the optimization of the measuring algorithm to reduce them.

This dissertation deals with the idea of annexing a new nuclear resource in the locality of the Dukovany Nuclear Power Plant and the way of its connection to the power system. The main aim of this dissertation is to design concrete solution of the connection of the new resource to a certain point of the power system and complete this design by means of chosen calculation. According to the task, this dissertation consists of three parts. The first part describes the current engineering solution of the main one line diagram of our two existing nuclear power plants and generally of chosen types of power plants abroad, too. There is also a design of the internal consumption of the nuclear power plants. The objective of the second part of this dissertation is to present the survey of the power and dispositional variants of the new resource in view and mainly assess general possibilities of its connection. Using all information from the preceding part, the third part presents the concrete design of the engineering solution of the connection of the new resource to the power system and also the calculation of parameters of block transmission line. Another dissertation named “Study of Slavětice Distribution Substation Enlargement for EDU New Resources“ concurs this part or more precisely, my dissertation as a whole . For my dissertation I have used some materials and information from the ČEZ Corporation which are confidential. I have also used some knowledge from the analysis from the EGÚ Brno Corporation. This dissertation neither represents nor substitutes a complex analysis of all aspects of a new nuclear resource in the Dukovany Nuclear Power Plant.

This thesis deals with design and use synthetic circuit elements with higher-order immittance with controlled current sources to implement the frequency filters. Controlled current sources which are derived from the voltage variations are presented. They are current follower, current invertor and current operational amplifier. Low-pass and high-pass filter which are used synthetic elements are simulated on computer. The influence of real properities of active elements and passive elements tolerances on filter functionality is investigated. Selected circuit of frequency filter is realized and measured the frequency characteristic.

The thesis deals with analyses of the laboratory symmetrical supplies with adjustable output voltage. It also describes different kinds of current cut-out circuits and several most frequent supply connection schemes. Analyses (simulation program OrCAD) show the characteristics and behaviour of the mentioned supplies. To set the output voltage, operational amplifier structures or linear three-terminal voltage regulator are very often used. The suggested supply was tested and its parameters compared with the simulations. The value of output voltage and current can be controlled with a computer with a USB port. For controlling of the output voltage and current the digital potentiometers were used and controlled by I2C bus.

The aim of this work is to clarify the function of the vocal cords and get familiarized with their investigative methods. In this work we find possible solutions to the peripheral device to illuminate the rapidly vibrating vocal cords using an LED that is less energy exacting than conventional halogen lamps. Then there are solved the problems of processing, signal filtering and finding the natural frequency of vibration of the vocal cords.

Presented thesis analyses a function of the particular type of the nanopositioner with aim to suggest and construct an electronic device suitable for control of the nanopositioner slider. In presented material there is a description of the control signals and possibility of their generating in the respect of slider movement accuracy. The main goal of the thesis is to describe electronic units ranging from power supply, control processor unit part to end part that directly joint nanopositioner. There is also programme equipment for microcontroller and computer, communication description, movement measuring and calibration and draft for the close-up of the control loop for additional increase of the movement accuracy.

This diplom thesis theoretically deals about principle of pulse welding current source. Work explains operation principle of the single acting transmit converter used in realized construction and mention the others examples of converters types. Goal of the work is design individual parts of source : input filter, pulse transformer, output inductor and power semiconductors components. Thesis also contains description of the regulation circuitry of the converter, auxiliary power supply and pre-driver for power transistors. If everything will be all right prototype of the source will be assembled and measured. Results will be compared with theoretical assumptions.

Tato práce se zabývá návrhem ultrazvukového odstraňovače zubního kamene pracujícím na frekvenci 27 kHz s maximální intenzitou ultrazvuku 5W/cm2. Popisuje mechanismus vzniku zubního kamene, důsledky na zdraví a metody jeho odstraňování. Zaměřuje se na principy odstraňování s využitím ultrazvukového vlnění. Dále je sestaveno funkční a blokové schéma. Na základě těchto znalostí je proveden návrh a výpočet jednotlivých částí aplikátoru. Výkonové a napěťové poměry jsou vypočítány od aplikačního hrotu směrem ke generátoru. V neposlední řadě je popsán návrh obvodů buzení měniče i kontrolních obvodů. Schémata jsou doplněna výkresy desek plošných spojů a soupiskou součástek.