The subject of this thesis was to compare injuries. First comparison accidents took place within the area of SK - NACE, their sources, and their causes in the Slovak Republic in the years 2012 - 2015. In the next step compared accidents within the area CZ - NACE, their sources, and causes in the Czech Republic in years 2011 - 2015. The last took place juxtaposition between the Slovak and Czech Republic.

The thesis is focused on the design of the new heat source of the existing building. The first part deals with the heat sources and fuels used in the Czech Republic. The second part includes design of three variants of heat sources: gas boilers, cogeneration unit with the electric boilers and cogeneration unit with gas boilers. The individual variations are also evaluated in terms of user comfort, space requirements or economy of operation. The third part includes measurement and evaluation of internal environment of the dining hall.

The point of the thesis was to design a heating system for new residential building, situated in Nový Lískovec, Brno. As a source of heat has been designed condensing boiler fueled by gas that meets the need for heating of heating system and hot water. All of the equipment will be located in a utility room on the ground floor. In the apartment have been designed decorative panel radiators.

The aim of the thesis is to introduce the basic photometric quantities and operating parameters of LED light sources, according to which the light sources are evaluated and compared. The thesis examines effects of high temperature and elevated stress on LED retrofits and a design of measurement methods to measure these influences. According to the proposed methods, nine samples of light sources were measured and compared to each other on a basis of the measurements. Comparison was made from the point of view of the energy as well as the quality of the produced light. The results were also compared to the parameters specified by the producers.

Title: Creation and characterization of cold molecules and molecular radicals in supersonic plasmatic nozzle Author: Milan Mašát Department: J. Heyrovsky Institute of Physical Chemistry of the ASCR, v. v. i. (32-UFCHAV) Supervisor: Mgr. Ondřej Votava, Ph. D., J. Heyrovsky Institute of Physical Chemistry of the ASCR, v. v. i. (32-UFCHAV) Abstract: The aim of this work is the development and characterization of experimental apparatus designed for study of expansion-cooled stable and unstable molecule species in near infrared region, as well as associated methodology. This device consists of discharge source of cold molecular radicals and a system for their spectroscopic analysis. The source and the spectroscopic part changes and upgrades are described in detail. Characterization of radical source and its methodology was done on the OH radical model. Changes in radical properties under different experimental conditions, such as stagnation pressure, used voltage and different geometries of both the nozzle and electrodes are measured. Methodology of spectroscopic analysis was carried out on methane molecule in unassigned part of spectra, so called icosad region. Keywords: supersonic expansion, molecular radical source, high resolution spectroscopy

Title: Structuring of plasma polymers: new methods for fabrication of nano-architectured thin films Author: Daniil Nikitin Department / Institute: Department of Macromolecular Physics/Charles University Supervisor of the doctoral thesis: Doc. Ing. Andrey Shukurov, PhD, Department of Macromolecular Physics/Charles University Abstract: The PhD thesis aims at the investigation of nanostructures based on plasma polymers. The main attention is paid to the combination of a gas aggregation cluster source with plasma-assisted vapor phase deposition for the fabrication of metal-polymer nanocomposites with bactericidal potential. Copper nanoparticles were incorporated into a biocompatible matrix of plasma polymerized poly(ethylene oxide) (ppPEO). The efficiency of such nanocomposite against multi-drug resistant bacteria was demonstrated. It was found that the segmental dynamics of the plasma polymer significantly changed in the presence of nanoparticles as revealed by the measurements of the dynamic glass transition temperature. The nanoscale confinement crucially influences the non-fouling properties of poly(ethylene oxide). A separate chapter is dedicated to the examination of the nanoparticle formation, growth and transport inside the source. Copper and silver nanoparticles were detected in situ in the gas phase...

This master’s thesis deals with the vertical movements of foundation soil in village Tetčice. In the first part describes geological structures and problems in locality. A next chapter deals with surveying vertical movements, measurements and evaluation. As addition is measurement actually groundwater level depending on the line levelling.

The subject of this thesis is the issue of leadership and management of employees in the construction company employees in the construction business. The practical part is focused on exploration of the company, its structures and strategies in the planning of human resources through the questionnaire.

Title: Structuring of plasma polymers: new methods for fabrication of nano-architectured thin films Author: Daniil Nikitin Department / Institute: Department of Macromolecular Physics/Charles University Supervisor of the doctoral thesis: Doc. Ing. Andrey Shukurov, PhD, Department of Macromolecular Physics/Charles University Abstract: The PhD thesis aims at the investigation of nanostructures based on plasma polymers. The main attention is paid to the combination of a gas aggregation cluster source with plasma-assisted vapor phase deposition for the fabrication of metal-polymer nanocomposites with bactericidal potential. Copper nanoparticles were incorporated into a biocompatible matrix of plasma polymerized poly(ethylene oxide) (ppPEO). The efficiency of such nanocomposite against multi-drug resistant bacteria was demonstrated. It was found that the segmental dynamics of the plasma polymer significantly changed in the presence of nanoparticles as revealed by the measurements of the dynamic glass transition temperature. The nanoscale confinement crucially influences the non-fouling properties of poly(ethylene oxide). A separate chapter is dedicated to the examination of the nanoparticle formation, growth and transport inside the source. Copper and silver nanoparticles were detected in situ in the gas phase...

This thesis deal with design of multi-quadrant power supply in linear and switching mode. In the case of the switching mode energy recuparation is also considered as well as optimalization of change of load response over time. Power supplies are designed as general purpose laboratory and process power supplies. Power supplies are designed so that they can be connected via galvanic insulated USB interface with a PC