The optical design of a soft X-ray (90-1100~eV) emission spectrometer for the Resonant Elastic and Inelastic X-ray Scattering (REIXS) beamline to be implemented at the CLS is presented. An overview of soft X-ray optical theory as it relates to diffraction gratings is given. The initial constraints and the process that led to this design are outlined. Techniques and software tools that were developed, using ray-tracing and diffraction grating efficiency calculations, are discussed. The analysis completed with these tools to compare existing soft X-ray emission spectrometer designs is presented. Based on this analysis, a new design with superior performance for this application is proposed and reviewed. This design employs Rowland circle geometry to achieve a resolving power in excess of 2,500 in the range of interest. In addition, a novel design is proposed for a larger extremely high resolution spectrometer which will provide resolving powers exceeding 10,000 throughout the higher end of this range. A review is given of research into the components, manufacturing techniques and tolerances that will be required to produce this spectrometer.
Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:SSU.etd-11282006-142920 |
Date | 28 November 2006 |
Creators | Muir, David Ian |
Contributors | Sofko, George J., Moewes, Alexander, Manson, Alan, Degenstein, Douglas A., Chang, Gap Soo, Achenbach, Sven |
Publisher | University of Saskatchewan |
Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
Language | English |
Detected Language | English |
Type | text |
Format | application/pdf |
Source | http://library.usask.ca/theses/available/etd-11282006-142920/ |
Rights | unrestricted, I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to University of Saskatchewan or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report. |
Page generated in 0.0017 seconds