This report documents the design and construction of a computer-controlled engraver (CNC engraver). Whereas most common machines used for this purpose are dimensioned towards milling, this project aims to create a dedicated engraver which could be of reduced size and complexity in comparison to standard CNC routers. This is partly because engraving imparts no need for a spindle motor, and that the machine only needs to withstand forces related to engraving, which are often significantly smaller than those present when milling. The proposed construction is designed towards use on aluminium and retains about the size of a laptop computer. Additionally, it should allow for engraving on material of almost any size, which is not a common feature in CNC machines. The design uses Arduino and open-source software to generate and execute G-code and is built with off-the-shelf components as well as both 3D-printed and machined components. Key conclusions are that it is indeed possible to make such a machine and that it could fulfil some useful purposes, even if the prototype, as built, has some issues with structural rigidity and therefore the final tolerances of the engraving. These issues primarily stem from the assembly supporting the Z-Axis and engraving bit, which lacks the stiffness needed for desirable results. Taking the fairly low complexity of the build and the price tag of under 2000 SEK in consideration, the prospects are deemed as promising. / Denna rapport beskriver konstruktionen och byggandet av en datorkontrollerad (CNC) gravyrmaskin. Emedan de gängse maskinerna för detta ändamål är en vanlig fräs eller dylikt, så syftar detta projekt att bygga en dedikerad gravyrmaskin, som då jämförelsevis kan vara av reducerad storlek och komplexitet. Maskinen använder Arduino och öppen källkod för att generera och exekvera G-kod, och byggs med inköpta standardkomponenter, såväl som både 3D-printade och egentillverkade komponenter. De främsta slutsatserna är att det mycket riktigt går att bygga en sådan maskin, och det finns användningsområden för en sådan, även om prototypen som den slutligen blev har problem med styvhet, och därför även med noggrannheten i gravyrerna.
Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:kth-320988 |
Date | January 2022 |
Creators | Booberg, Rasmus, Borgén, Martin |
Publisher | KTH, Skolan för industriell teknik och management (ITM) |
Source Sets | DiVA Archive at Upsalla University |
Language | English |
Detected Language | English |
Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
Format | application/pdf |
Rights | info:eu-repo/semantics/openAccess |
Relation | TRITA-ITM-EX ; 2022:106 |
Page generated in 0.0036 seconds