Compacted Graphite Iron offers mechanical properties in between of gray cast iron and ductile iron. Thus,the material is seen as a hopeful alternative for engine cylinder blocks and heads satisfying environmentaland performance objectives. Nevertheless, CGI is more difficult to machine than conventional gray castiron due to the presence of MnS and thin wall section of probing high strength. This problem of CGI thenled to the initiation of large Optima Sweden project to study machinability and optimization of related toCGI.The thesis is centered on a study of tool life, cutting force and MRR with regards to machining parametersmainly feed rate and cutting speed for CGI milling. Tool life is measured; flank-wear is observed andcompared between several combinations of cutting parameters.Similarly cutting forces were measured using LMS software for full factorial design experiments. Extensivemachining experiments were carried out. Machining tests was done based on Design of Experiment (DoE)for high cutting data and lower data are performed separately. Comparison is made for tool life and cuttingforces. After data collection, analysis of tool life and force has been followed. Once the data is analyzedand checked its consistency. An approximate model is developed using MODDE software. Further, multiobjective optimization of tool life and Material removal rate (MRR) using cutting parameters mainly feedrate and cutting speed are investigated. Working on optimal parameters will allow for CGI is to becompetitive in manufacturing with gray CI, aluminum alloy, magnesium.Keywords: Compacted Graphite Iron (CGI), face milling, tool life, MRR, optimization, cutting force
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:kth-41280 |
| Date | January 2011 |
| Creators | Berhane, Mulugeta |
| Publisher | KTH, Industriell produktion |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
| Relation | Master's Project in Production Engineering Management ; 468 |
Page generated in 0.0135 seconds