Return to search

[en] LOSS OF CONTROL AND INADEQUATE VOLTAGE CONTROL ACTION IN THE EVALUATION OF VOLTAGE STABILITY CONDITIONS / [pt] PERDA E INADEQUAÇÃO DO CONTROLE DE TENSÃO NA AVALIAÇÃO DAS CONDIÇÕES DE ESTABILIDADE DE TENSÃO

[pt] Esta pesquisa está relacionada à avaliação das condições de estabilidade de
tensão em pontos de operação do sistema elétrico. A modelagem de geradores /
compensadores síncronos e compensadores estáticos são analisadas.
Estabeleceram-se os melhores modelos com controle de tensão ativo e com perda
do controle. A questão da adequação do controle de tensão foi tratada através da
análise dos elementos da matriz de sensibilidade entre as grandezas controladoras
e as tensões controladas. Os índices de estabilidade de tensão foram calculados.
Em todos os casos, a perda de controle de tensão tem impacto negativo sobre as
condições de estabilidade de tensão. Nos casos com ação de controle inadequada,
independe da relação inversa entre grandeza controladora e tensão controlada, um
aumento da tensão na barra controlada teve um impacto positivo sobre as
condições de estabilidade de tensão, e uma diminuição da tensão na barra
controlada teve impacto negativo sobre as condições de estabilidade de tensão.
Esse é o resultado esperado também quando a ação de controle é adequada. / [en] This research is related to the evaluation of voltage stability conditions of
operating points of the power system. It has been studied the modelling of
synchronous generators/synchronous compensators and static var compensators.
The best models were established with active voltage control and with loss of
control. The issue of voltage control was treated through analysis of the matrix
sensitivity elements between the controlling variables and voltages at controlled
buses. The voltage stability indexes were evaluated. In all cases, control loss
proved to have a negative impact on voltage stability conditions. In cases with
inadequate control action, results are non-dependent of the opposed relation
between the controlling variable and voltage at controlling bus, an increase on
voltage at controlled busbar proved to have a positive impact on voltage stability
conditions, and a decrease on voltage at controlled busbar proved to have a
negative impact on voltage stability conditions. This is also expected when the
control action is appropriate.

Identiferoai:union.ndltd.org:puc-rio.br/oai:MAXWELL.puc-rio.br:23994
Date03 February 2015
CreatorsOSCAR CUARESMA ZEVALLOS
ContributorsRICARDO BERNARDO PRADA
PublisherMAXWELL
Source SetsPUC Rio
LanguagePortuguese
Detected LanguagePortuguese
TypeTEXTO

Page generated in 0.0082 seconds