A bipolar charge transport (BCT) model is used to simulate charge injection and transportdynamics inside insulation material which are used in a high voltage direct current (HVDC)cable. Gaining knowledge about space charge density and electric field distribution in theinsulation material enables minimising charge injection at the metal-insulator interface andavoiding unnecessary energy loss. Simulation methods using the numerical Finite ElementMethod (FEM) are implemented in COMSOL multiphysics in order to investigate the effect ofchemical structure such as dipoles, physical defects such as interface roughness and impurityconcentration leading to ions, on the potential barrier and charge injection at the interface.Interface dipoles such as surface dipoles or chemical dipoles can increase or decrease thepotential barrier at the interface depending on direction/orientation of the dipole. Moreover,using a field enhancement factor to include the effect of interface roughness at the interfaceyields increased charge injection when higher values of the field enhancement factor wereused. The barrier height becomes therefore locally lower where the degree of roughness ishigher. Including the effect of ions, the electric field was observed to be enhanced near theelectodes, where it was weakened in the middle of the insulation, depending on the amount ofthe impurity concentration inside the insulation. Improvement on the charge injection lows isalso done using a combination of both Richardson-Schottky and Fowler-Nordheim chargeinjection laws to include both a classical and a quantum mechanical description in the BCTmodel. Solving for the transmission coefficient from Schrödinger equation could improve theaccuracy of Fowler-Nordheim as well. Including potentials due to image effect or chemicalcompositions such as water dipoles will affect the charge injection barrier and the transmission coefficient.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:uu-515421 |
| Date | January 2023 |
| Creators | Mosa, Mohammed |
| Publisher | Uppsala universitet, Tillämpad mekanik |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
| Relation | UPTEC F, 1401-5757 ; 23064 |
Page generated in 0.0194 seconds