Return to search

Delta X : Utveckling av värmeväxlare

<p>Stockholms vattenskärning AB in Kungsängen has through the acquisition of a company begun to design and produce aircraft heaters whose origin is early 1970s which follows a high inefficiency in terms of energy consumption and size.</p><p>The aircraft heater, which is sold worldwide, serves its purpose for customer satisfaction and has done so ever since it was developed in the 70s.</p><p>Stockholms vattenskärning AB is now investigating the possibility in making the aircraft heaters more efficient, both in terms of energy consumption but also on a more efficient design with the belief that it would lead them to an edge in the market.</p><p> </p><p>The aircraft heater consists of several main components whose function altogether is to keep passenger aircrafts warm while they are on the ground.</p><p>This project has been limited to the further development of the heat exchanger package which accounts for the conversion of the hot medium to the fresh air being carried in to the aircraft cabin.</p><p> </p><p>Work has been divided into different phases in order to create a better understanding of the project range and to make it easier to divide the various elements in the time available, 10 weeks. These phases are literature review, situation analysis, concept generation, CAD, concept comparison and writing reports.</p><p>After the initial literature review was made, a fundamental theory was written which is essential in understanding the remaining parts of the project.</p><p>With the theoretical part as support, measurements and calculations were made on the current heat exchange package in a situation analysis to ensure its operation and efficiency.</p><p>In the concept generation phase, the collected facts from the literature review was used as the basis for creating a matrix. The purpose of the matrix was to indicate the two most suitable types of heat exchangers to develop four new concepts out of.</p><p>In the CAD phase the four concepts was drawn up and then described with text and images.</p><p>The last phase is the concept comparison where a concept selection matrix is used to function as a decision basis for further production at Stockholms vattenskärning AB.</p><p> </p><p>The four concepts have been developed based on the current heat exchanger and is gradually changed into a design of a cross-flow heat exchanger constructed out of stainless sections. The purpose of this is to have gradual upgrading of the heat exchanger as an option, in order not to saturate the market.</p>

Identiferoai:union.ndltd.org:UPSALLA/oai:DiVA.org:uu-126538
Date January 2010
CreatorsHeibert, Jimmy, Johansson, Marcus
PublisherUppsala University, Department of Engineering Sciences, Uppsala University, Department of Engineering Sciences
Source SetsDiVA Archive at Upsalla University
LanguageSwedish
Detected LanguageEnglish
TypeStudent thesis, text

Page generated in 0.002 seconds