Return to search

Inorganic modification of Palabora vermiculite

Conventional processes for the manufacture of exfoliated natural vermiculite employ temperatures exceeding 800 °C and the onset temperature is above 450 °C. In many applications, notably fire retardants, it is desirable that exfoliation of vermiculite should occur at temperatures in the range of 200 °C to 350 °C. For this purpose, South African Palabora vermiculite was modified by ion exchange with ammonium and selected alkali metal and alkaline earth metal ions. These expeiments were performed at room temperature using an orbital shaker for 15 days. Another set of experiments was performed by immersing vermiculite in saturated sodium chloride solution for periods up to six months. At the end of every month, sodium-exchanged vermiculite samples were taken for analysis. The thermal expansion and degradation of modified vermiculites were studied using thermo-mechanical analysis (TMA) and thermogravimetric analysis (TGA) respectively. Interlayer composition was studied using cation exchange with ammonium acetate. The leached cations were quantitatively determined using inductively coupled plasma optical emission spectroscopy (ICP-OES). Scanning electron microscopy (SEM) was applied to study the samples’ morphology. X-ray diffraction (XRD), infrared (FT-IR) and Raman spectroscopy confirmed that the basic vermiculite crystal structure was left unchanged during inorganic modification in both sets of experiments. It was confirmed that the blowing agent in the neat vermiculite was the interlayer water. In the exchanged vermiculite with ammonium ions, it was found that ammonia and water were the blowing agents and they were simultaneously released during thermal degradation. However, ammoniumvermiculite did not show a relatively better thermal expansion ratio, despite the presence of both ammonia and water in the interlayer. In the increasing ionic potential series: Na-vermiculite, Ba-vermiculite, Ca-vermiculite and Mg-vermiculite, it was found that the onset expansion temperature also increased dramatically. Exchange with relatively low ionic potential species, namely sodium, potassium and ammonium, lowered the exfoliation onset temperature of vermiculite to below 300 °C. PORTUGUESE : Processos convencionais de produção da vermiculita natural exfoliada empregam temperaturas que excedem 800 °C e a temperatura inicial de expansão está acima de 450 °C. Em muitas aplicações, particularmente em áreas onde se deseja extinção de fogo, é desejável que a exfoliação da vermiculite ocorra na região entre 200 °C e 350 °C. Assim, a vermiculita proveniente de Palabora, África do Sul, foi quimicamente modificada com cloretos de amónio, de metais alcalinos e de metais alcalino-terrosos previamente seleccionados. As experiências foram realizadas à temperatura ambiente sob agitação constante por 15 dias. Outro desenho experimental foi executado por imersão da vermiculita em solução saturada de cloreto de sódio durante 6 meses. Mensalmente foram retiradas alíquotas de vermiculita modificada para a devida análise. A expansão e degradação térmicas das amostras da vermiculita modificada foram estudadas usando análises termo-mecânica (TMA) e termogravimétrica (TGA). O método de extracção de catiões usando acetato de amónio foi aplicado em todas as amostras e os extractos foram analisados usando plasma inductivamente acoplado ligado ao espectroscópio óptico de emissão (ICP-OES). A morfologia das amostras foi comparada usando microscopia electronica (SEM). Difracção por raios-X (XRD), espectroscopia de infravermelho (FT-IR) e Raman, confirmaram a manutenção da estrutura cristalina da vermiculita durante a reacção de troca iónica em ambas experiências. Na vermiculita nativa foi confirmada a libertação de água antes e durante a exfoliação. Na amostra de vermiculita-NH4 foi detectado amoníaco, para além da água, e ambos foram libertos simultaneamente durante a degradação térmica. Entretanto, vermiculita-NH4 não exibe uma relativamente melhor expansão térmica apesar da presença de água e amónia entre as camadas da vermiculita. Na seguinte série crescente the potencial iónico: vermiculita-Na, vermiculita-Ba, vermiculita-Ca e vermiculita-Mg, a temperatura inicial de exfoliação também é proporcionalmente crescente. Trocas catiónicas da vermiculita natural pelos seguintes iões de baixo potencial iónico: sódio, potássio e amónio resultaram na redução da temperatura inicial de exfoliação para temperaturas abaixo de 300 °C. / Dissertation (MSc)--University of Pretoria, 2011. / Chemistry / unrestricted

Identiferoai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:up/oai:repository.up.ac.za:2263/29010
Date24 October 2011
CreatorsMuiambo, H.F. (Herminio Francisco)
ContributorsFocke, Walter Wilhelm, hmuiambo@tuks.co.za
Source SetsSouth African National ETD Portal
Detected LanguageEnglish
TypeDissertation
Rights© 2011, University of Pretoria. All rights reserved. The copyright in this work vests in the University of Pretoria. No part of this work may be reproduced or transmitted in any form or by any means, without the prior written permission of the University of Pretoria.

Page generated in 0.2302 seconds