Back to search

Central Florida

Process Development For The Fabrication Of Mesoscale Electrostatic Valve Assembly

Abstract

dc:description.abstract

This study concentrates on two of the main processes involved in the fabrication of electrostatic valve assembly, thick resist photolithography and wet chemical etching of a polyamide film. The electrostatic valve has different orifice diameters of 25, 50, 75 and 100 µm. These orifice holes are to be etched in the silicon wafer with deep reactive ion etching. The photolithography process is developed to build a mask of 15 µm thick resist pattern on silicon wafer. This photo layer acts as a mask for deep reactive ion etching. Wet chemical etching process is developed to etch kapton polyamide film. This etched film is used as a stand off, gap between two electrodes of the electrostatic valve assembly. The criterion is to develop the processed using standard industry tools. Pre post etch effects, such as, surface roughness, etching pattern, critical dimensions on the samples are measured with Veeco profilometer.

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Dhru, Shailini Rajiv
Contributors dc:contributor
  • Sundaram, Kalpathy B.

Subjects

dc:subject × 11

Rights

Language dc:language
English

Identifiers

dc:identifier.*
Identifier
CFE0001828

Chain of custody

source
Harvested from
Central Florida
Base URL
stars.library.ucf.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Dhru, Shailini Rajiv. Process Development For The Fabrication Of Mesoscale Electrostatic Valve Assembly. https://stars.library.ucf.edu/etd/3141