Back to search

West Virginia University

A Solution for Overcoming Transradial Prosthetic Control Limitations with Additive Manufacturing and Modeling Techniques

Abstract

dc:description.abstract

Prosthetic limbs have aided in the restoration of both cosmetic and functional capabilities of the human hand; however, structural and control limitations hinder widespread adoption. One example of these limitations addressed in this study is the lack of wrist degrees of freedom (DOF) in robotic hands. Using the mechanical model-driven design, I developed a hand with cable-driven actuation of fingers and direct actuation of the wrist pronation-supination and flexion-extension DOFs. An inverse dynamic simulation determined torque requirements in common tasks manipulating a 1 kg mass with rotational speeds up to 60 deg/s, setting a minimum limitation of 0.76 Nm on the wrist servomotors. The performance of the manufactured robotic hand was validated using motion capture. Kinematic errors were 19 deg on average with the best and worst values spanning 2 to 55 deg (thumb CMC and third digit PIP DOFs, respectively). The execution delays computed with the cross-correlation of the command-movement relationship were 200 to 400 ms in 6 DOF movements. This performance was appropriate for the functional use of the device and serves as the framework for testing future controller designs.

Degree

thesis:*
Name thesis:degree_name
MS
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Mechanical and Aerospace Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Santee, Olivia Layne
Contributors dc:contributor
  • Sergiy Yakovenko
  • Victor Mucino
  • Gregory Thompson

Subjects

dc:subject × 6

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
West Virginia University
Base URL
researchrepository.wvu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Santee, Olivia Layne. A Solution for Overcoming Transradial Prosthetic Control Limitations with Additive Manufacturing and Modeling Techniques. Thesis thesis, https://doi.org/10.33915/etd.10165