Abstract
dc:description.abstractThe purpose of this work was to model and test an intermediate material that would absorb impact loads induced during deployment of a deployable rollover protective structure (ROPS) designed for use on a farm tractor. The design criteria required that the intermediate material, under compressive loads, maintain the integrity of all moving parts while introducing a minimum impact time of 0.005 seconds. A "ring" shaped part made of 80-Derometer rubber (a product of the Goodyear Corporation) was incorporated into the impact region of the ROPS deployment mechanism. Theoretical calculations were made based on energy balance equations and 2-D Working Model software. Laboratory test data of the ROPS motion was collected during three separate deployments using an OPTOTRAK system as well as an accelerometer. Also a finite model of the ROPS was simulated as a means of obtaining additional information on the impact using LS-DYNA 3D. Data from the various sources was compared and showed consistency with theoretical parameters. The 1-inch thick rubber was compressed approximately 0.33 inches under an impact load of just over 6,700 pounds (s = 730 psi). The impact time on the rubber was found to be approximately 0.007 seconds while no appreciable damage was afflicted on the individual parts of the ROPS.
Degree
thesis:*- Name thesis:degree_name
- MS
- Level thesis:degree_level
- Thesis
- Discipline thesis:degree_discipline
- Mechanical and Aerospace Engineering
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Howard, Steven Harold
- Contributors dc:contributor
-
- Kenneth H. Means
Identifiers
dc:identifier.*- Identifier
- https://researchrepository.wvu.edu/etd/10374