Back to search

West Virginia University

The Impact of Fracture Properties on Adsorbed Gas Production From a Marcellus Shale Horizontal Well

Abstract

dc:description.abstract

Abstract In addition to the gas present in the pores of the rock, shale also contains gas in the adsorbed state within the surface of the organic matter within the formation. As the free gas is produced, the pressure in the reservoir depletes, causing the adsorbed gas to be released, complementing the gas production. At the same time, the pressure reduction leads to increase in the effective stress causing shale compaction. The shale compaction negatively impacts the permeability and hydraulic fracture conductivity. This study aimed to investigate the impact of hydraulic fracture characteristics on the adsorbed gas recovery and, ultimately, on the production from a Marcellus shale horizontal well. A model for a horizontal Marcellus shale well, completed with multiple hydraulic fracture stages, was employed in this study to investigate the adsorbed gas production from Marcellus shale. The model has been developed based on the available information from several existing Marcellus shale horizontal wells in West Virginia. Laboratory and published data relative to adsorbed gas in Marcellus shale and shale mechanical properties were collected and analyzed. A set of multipliers were generated to account for the impairments in hydraulic fracture conductivity, the reduction in the formation (matrix and fissure) permeability, and the shale shrinkage caused by net stress increase. The geomechanical multipliers then incorporated into the model. The model was then utilized to investigate the impact of different parameters, including Langmuir pressure and volume, fracture half-length, fracture spacing, and fracture conductivity, on adsorbed gas recovery and cumulative gas production. Inclusion of the geomechanical multipliers in the model provided more realistic production predictions and a better understanding of the hydraulic fracture impact. The gas desorption was found to have a higher contribution to the gas production when the reservoir pressure declined sufficiently to allow the gas to be desorbed from the complex shale system. Additionally, The fracture half-length was found to improve the desorbed gas production particularly in the latter stages of the production, while fracture conductivity and fracture spacing improve the gas desorption throughout the production. Therefore, it can be concluded that hydraulic fracturing plays a significant role in the adsorbed gas recovery.

Degree

thesis:*
Name thesis:degree_name
MS
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Petroleum and Natural Gas Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Bulule, Valcia Mildreth Vasco
Contributors dc:contributor
  • Kashy Aminian
  • Samuel Ameri
  • Mohamed El Sgher

Subjects

dc:subject × 5

Identifiers

dc:identifier.*
Identifier
<p><a href="https://orcid.org/0009-0008-0887-7014">https://orcid.org/0009-0008-0887-7014</a></p>
https://researchrepository.wvu.edu/etd/11817

Chain of custody

source
Harvested from
West Virginia University
Base URL
researchrepository.wvu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Bulule, Valcia Mildreth Vasco. The Impact of Fracture Properties on Adsorbed Gas Production From a Marcellus Shale Horizontal Well. Thesis thesis, https://doi.org/10.33915/etd.11817