Back to search

West Virginia University

EVALUATION OF LOW-GRADE RED OAK (Quercus rubra) AND RED MAPLE (Acer rubrum) AS A RAW-MATERIAL FOR CROSS-LAMINATED TIMBER PANEL PRODUCTION

Abstract

dc:description.abstract

Hardwoods in the Appalachian region are traditionally destined for use in furniture, cabinetry, pallets, and railroad ties. The expanding market for Cross Laminated Timber (CLT) is an opportunity for increased utilization of low-quality hardwoods typically used in pallets or equipment mats. Large quantities of low-grade red oak (Quercus rubra) and red maple (Acer rubrum) to be used in CLTs would provide sufficient lumber sources that could foster the growth of CLT manufacturing facilities in the state of West Virginia or Appalachia all together. The objective of this study was to determine the yield distribution of visual structural grade quality lumber from low grade NHLA lumber (No. 2A, No. 2B, No. 3A, and No. 3B Common lumber) of both red oak and soft maple. In addition to the NHLA grade, visual structural grades were assigned to the lumber by a grader certified by the Northeastern Lumber Manufacturers Association (NELMA) and the same boards underwent flatwise testing to determine the modulus of elasticity (MOE b) through non-destructive tests (NDT). This was completed to determine if proof-loading could be an alternative grading method to visual grading. The results of the study indicated that 45.0 percent of red oak NHLA grades 2 common and lower met the minimum visual grade requirements stated in ANSI/APA PRG 320 (2020) to be used in the manufacture of CLT panels. The population of soft maple had 54.4 percent meet these same requirements. The most common defects for red oak were knots before surfacing four sides (S4S) and splits after S4S. In soft maple, knots were the most common defects before and after S4S. The yield of lumber meeting the minimum MOE of 1.2x106 psi requirement stated in ANSI/PRG-320 (2020) was 96.0 percent of red oak and 97.0 percent of soft maple. These results indicate that low grades of red oak and soft maple could be used in the production of CLT panels and additional studies into producing CLT panels from these common species would be beneficial.

Degree

thesis:*
Name thesis:degree_name
MS
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Forest Resource Management

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Young, Matthew Allen
Contributors dc:contributor
  • Joseph McNeel
  • Curt Hassler
  • Gloria Oporto

Subjects

dc:subject × 7

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
West Virginia University
Base URL
researchrepository.wvu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Young, Matthew Allen. EVALUATION OF LOW-GRADE RED OAK (Quercus rubra) AND RED MAPLE (Acer rubrum) AS A RAW-MATERIAL FOR CROSS-LAMINATED TIMBER PANEL PRODUCTION. Thesis thesis, https://doi.org/10.33915/etd.12131