Back to search

West Virginia University

Passive Wireless Corrosion and Temperature Detection in High-Temperature Environments

Abstract

dc:description.abstract

This work focuses on the theory and development of LC sensors for high temperature and corrosion measurement for stainless steel and copper surfaces with power industry and general corrosion detection applications. The LC resonators were fabricated via screen printing an Ag inductor on an alumina substrate. The LC design was modeled using the ANSYS HFSS modeling package. The LC passive wireless sensors operate with resonant frequencies centered at 85-110 MHz. The wireless response of the LC sensor was interrogated and received by a radio frequency signal generator and spectrum analyzer at temperatures from 50-800 °C for copper ground planes and 50- 1000 °C for stainless steel ground planes in real-time. The corrosion kinetics of the Cu 110 and stainless steel 304 H were characterized by SEM and TGA analysis. For an ideal ground plane with no surface defects the sensor was able to display a corrosion sensitivity of approximately 0.05 MHz/µm of oxidation with a total of 170 µm of oxidation growth and a temperature sensitivity of 0.013 MHz/°C over a temperature range of 25 °C to 800 °C.

Degree

thesis:*
Name thesis:degree_name
MS
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Lane Department of Computer Science and Electrical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Strader, Noah Lane
Contributors dc:contributor
  • Daryl Reynolds
  • Natalia Schmid
  • Brian Woerner

Subjects

dc:subject × 10

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
West Virginia University
Base URL
researchrepository.wvu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Strader, Noah Lane. Passive Wireless Corrosion and Temperature Detection in High-Temperature Environments. Thesis thesis, https://doi.org/10.33915/etd.12339