Back to search

West Virginia University

Inherently Porous Metal Structures with Sufficient Mechanical Properties Through Direct Writing of Bio-based Inks

Abstract

dc:description.abstract

There is currently a burgeoning interest in developing 3D printed metal structures with inherent porosity and sufficient mechanical properties for mass customization in the biomedical field. Current approaches for 3D printing of biocompatible metals rely on powder-bed fusion methods which are energy intensive and utilize large amounts of metal powder that is challenging to recycle. In addition, such methods aim on producing dense parts and porosity generation, within the printed part, is challenging due to the complex physics of the melting pool. Here, a relatively new and promising approach is undertaken to study the 3D printing of inherently porous structures with appropriate mechanical properties towards biomedical applications. In particular, the direct ink writing (DIW) method is employed as a means to induce porosity within the printed parts by formulating, printing, and post-processing model ‘bio-inks’. During DIW a yield stress fluid (i.e., ink) is robotically extruded on digitally predefined substrate locations to build parts in a layer-by-layer fashion. Advantages of DIW include almost no material waste, ease of fabrication, and ink formulation using disparate starting precursors. Ink design and formulation studies using biopolymer binders such as xanthan gum and cellulose along with a stainless-steel hard phase led to formulation of controllably extrudable viscoelastic fluids for a range of resolutions. Ink characteristics such as yield stress, flow transition index - determining ink ductility/brittleness - are elucidated and related to printability while the limitations of current rheological models for non-Newtonian inks are highlighted. Furthermore, post-processing studies are conducted to establish relationships between different bio binder compositions (and their binary concentrations) and the hard phase, induced porosity, and resulting mechanical properties. Taking advantage of different binder conformations, the induced porosity and mechanical behavior of 3D printed and sintered parts are found to exhibit new synergies. Macro porosities and mechanical properties within a range required for potential biomedical parts are achieved and demonstrated.

Degree

thesis:*
Name thesis:degree_name
PhD
Level thesis:degree_level
Dissertation
Discipline thesis:degree_discipline
Mechanical and Aerospace Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Aysal, Havva Eda
Contributors dc:contributor
  • Konstantinos Sierros
  • Xingbo Liu
  • Edward Sabolsky
  • Bruce Kang
  • Chih-Hung Chang

Subjects

dc:subject × 9

Identifiers

dc:identifier.*
Identifier
<p><p><a href="https://orcid.org/0000-0002-2112-7268">https://orcid.org/0000-0002-2112-7268</a></p></p>
https://researchrepository.wvu.edu/etd/12541

Chain of custody

source
Harvested from
West Virginia University
Base URL
researchrepository.wvu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Aysal, Havva Eda. Inherently Porous Metal Structures with Sufficient Mechanical Properties Through Direct Writing of Bio-based Inks. Dissertation thesis, https://doi.org/10.33915/etd.12541