Back to search

West Virginia University

Dynamic Load Identification using Optimal Sensor Placement and Dynamic Condensation Methods

Abstract

dc:description.abstract

Knowledge of excitation loads that structures experience during their service life is pivotal in different engineering fields, not only from a structural design optimization point of view but also as prevention of possible damages to the structures themselves. However, in case of dynamic events such as tornadoes, structures subjected to impulsive load due to their vicinity of explosions, the excitation load cannot be directly determined through direct measurements. In these scenarios, the inverse problem is used, and it is called load identification. This type of problem tries to determine the excitation load knowing the system response through a series of sensors placed on the structure. Most of the time, the number of sensors and their locations are randomly selected causing errors in the load estimation. The proposed mathematical method provides the appropriate number of sensors and their optimal locations. It combines the Craig-Brampton condensation method with the normal-mode method and D-optimal design technique. This method is employed and verified on simple structural members such as beams and plates and then it is applied on more complex structures such as a wind-turbine tower, wind-turbine blade, and an aircraft wing, which lead to more complexity in the procedures. Finite element models of these simple and complex structures are made in the general-purpose software ABAQUS. Then, a free-vibration analysis is carried out on each structure and the natural frequencies and mode shapes are extracted. Different load shapes are applied on the structures at different frequencies and noise conditions. The dynamic load is reconstructed by measuring the transient response of the structure at the optimum sensor locations. The results reveal that the proposed method can reconstruct a dynamic load with a high level of accuracy. Furthermore, the implementation of different parameters, such as noise effects, does not cause amplified errors in the final load estimation making the proposed method more robust.

Degree

thesis:*
Name thesis:degree_name
PhD
Level thesis:degree_level
Dissertation
Discipline thesis:degree_discipline
Mechanical and Aerospace Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Pecora, Iole
Contributors dc:contributor
  • Nithi T. Sivaneri
  • Osama M. Mukdadi
  • Christopher D. Griffin
  • Marcello R. Napolitano
  • Adam M. Halasz

Subjects

dc:subject × 7

Identifiers

dc:identifier.*
Identifier
<p><p><a href="https://orcid.org/0009-0009-8561-1882">https://orcid.org/0009-0009-8561-1882</p></a></p>
https://researchrepository.wvu.edu/etd/12591

Chain of custody

source
Harvested from
West Virginia University
Base URL
researchrepository.wvu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Pecora, Iole. Dynamic Load Identification using Optimal Sensor Placement and Dynamic Condensation Methods. Dissertation thesis, https://doi.org/10.33915/etd.12591