Back to search

West Virginia University

Development of a Model to Estimate Engine Crankcase Methane Vent Emission Rates

Abstract

dc:description.abstract

The primary focus of this research is the modeling and validation of crankcase methane emissions stemming from natural gas combustion engines commonly deployed in the natural gas compression industry. The models employed rely on equations predicting the flow rate and composition of losses, typically generated within reciprocating piston-cylinder systems. Since crankcase emissions originate in a piston–cylinder arrangement, multiple variables were considered in this study, including displaced volume, pressure, temperature, flow, and viscosity (with corrections applied to account for the thermal and compositional effects on the mixture of fluids). The initial data for this research was collected during three measurement campaigns at four natural gas well sites in northern West Virginia's Marcellus Shale region. Subsequently, a second phase of data collection was conducted in a custom-designed engine laboratory, testing a Caterpillar G3508J engine across a 224 kW to 430 kW load range. Parallel to this data collection, a simulation model based on a three-component blowby mixture methodology was developed and implemented in Simulink®. This model is capable of predicting crankcase methane emission rates for a variety of natural gas engines used in the compression industry. Engine crankcase methane emissions measured during field campaigns and in the laboratory (e.g., 366 g/hr at a 300-kW load point) were compared with values predicted by the model. In both cases, the measurements fell 100% within the model’s predicted range. This laboratory finding was highly significant, as this emission rate constituted 16.8% to 22% of the total engine hydrocarbon exhaust emissions. The model also confirmed that crankcase methane originates primarily from unburned fuel (containing ~96% methane) rather than post-combustion exhaust gas (containing ~0.15% methane). Finally, using a lean-burn natural gas engine inventory of 2,571 units, a national crankcase methane emissions estimate was calculated to be between 56.7 and 58.5 Gg/year. To contextualize this finding, this estimate was compared against the crankcase component of national 'top-down' combustion slip estimates. Based on literature suggesting crankcase emissions account for 3-20% of the total slip (estimated in one study at 328 Gg/year), the resulting plausible range for crankcase emissions is 9.8–65.6 Gg/year. The study's result aligns well with the upper end of this derived range.

Degree

thesis:*
Name thesis:degree_name
PhD
Level thesis:degree_level
Dissertation
Discipline thesis:degree_discipline
Mechanical and Aerospace Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Rincon, Juan Pablo
Contributors dc:contributor
  • Derek Johnson
  • Christopher Ulishney
  • Victor Mucino
  • Nigel Clark
  • Jaime Castro

Subjects

dc:subject × 4

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
West Virginia University
Base URL
researchrepository.wvu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Rincon, Juan Pablo. Development of a Model to Estimate Engine Crankcase Methane Vent Emission Rates. Dissertation thesis, https://doi.org/10.33915/etd.13157