Back to search

West Virginia University

A Study in the Advanced Manufacturing of Full Solids Oxide Fuel Cells (SOFCs) via Aerosol Deposition (AD) Methods with Macro- and Microstructural Defect Characterization

Abstract

dc:description.abstract

The goal of this work is to 3D print a full SOFC layer-by-layer using aerosol deposition (AD) at a resolution of 5 μm. To achieve this goal, several studies were undertaken to develop and optimize an AD system to use ceramic inks. A 130 kHz AD system was developed with 4 material pumps to allow for depositions of individual compositions of the in-situ mixture of multiple solutions to allow for the fabrication of functional gradients in three dimensions. This system was then programmed to deposit air electrode layers containing different material ratios and porous microstructures, comparing their electrochemical performance to create a baseline. The deposition of the dense electrolyte layer was the next step, which is necessary to prevent fuel and gas from permeating out of the cell structure. Multiple process parameters were developed and evaluated in effort to minimize microstructural defects in the deposited layers and macrostructural defects in the anode substrate. The addition of an additional NiO/YSZ layer, deposited between the anode support and electrolyte layer was found to be necessary due to defects found when sintering electrolyte layers directly on the anode supports. Multiple NiO powder types were tested to determine which has the greatest positive impact on both anode surface quality and electrolyte quality. These best parameters were then combined with an Ultrafast High Temperature Sintering (UHS) method to rapidly produce small (~1 cm) button cells with microstructural characterization and electrochemical testing used to evaluate their effectiveness when used together. Lastly, a different nozzle configuration was incorporated into the system and its effectiveness at depositing air electrodes was focused on determining if the system parameters could be improved and pave the way for future work.

Degree

thesis:*
Name thesis:degree_name
MS
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Mechanical and Aerospace Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Warmuth, Davis A
Contributors dc:contributor
  • Edward M. Sabolsky
  • Konstantinos Sierros
  • Xueyan Song

Subjects

dc:subject × 5

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
West Virginia University
Base URL
researchrepository.wvu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Warmuth, Davis A. A Study in the Advanced Manufacturing of Full Solids Oxide Fuel Cells (SOFCs) via Aerosol Deposition (AD) Methods with Macro- and Microstructural Defect Characterization. Thesis thesis, https://doi.org/10.33915/etd.13283