Back to search

West Virginia University

Numerical simulation for parametric study of a two -stroke compression ignition direct injection linear engine

Abstract

dc:description.abstract

A time based numerical simulation program was built at West Virginia University to simulate the operation of a two-stroke compression ignition direct injection linear engine. The two-stroke linear engine consists of two pistons connected together with a yoke and allowed to move freely according to the frequent combustion that takes place in response to fueling and load applied along the full stroke of the internal combustion engine. The simulating program used a series of dynamic and thermodynamic equations that were solved simultaneously to predict the performance and analyze the different factors affecting the operation of the two-stroke compression ignition linear engine coupled with linear alternator. This dissertation presents a dimensionless analysis parametric study to explore this novel type of internal combustion engine. It was found that these types of engines have a nature to build up compression ratio, and this was the reason behind recommending to operate such engines with high air to fuel ratios. Indicated efficiency was found to have an average of 42%. For stationary power generation a bore to effective stroke ratio equal to 1, or 1.3 would result in an efficient power generation unit whereas a bore to effective stroke length equal to three or four would result in a high-indicated power per cylinder volume, which may be suitable for automotive application. It was also found that a bore to effective stroke length of 2.2 would result in excessive compression ratio. This makes such a design limited to special applications where high indicated power per generator mass is needed. Advancing fuel injection close to the cylinder head during the compression stroke and burning the fuel with premixed to diffusive combustion ratio of 20% to 80% would enhance indicated efficiency and indicated power generated relative to injecting the fuel far from the cylinder head during the compression stroke and burning the fuel with premixed to diffusive combustion ratio of 40% to 60%.

Degree

thesis:*
Name thesis:degree_name
PhD
Level thesis:degree_level
Dissertation
Discipline thesis:degree_discipline
Mechanical and Aerospace Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Shoukry, Ehab F.

Subjects

dc:subject × 2

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
West Virginia University
Base URL
researchrepository.wvu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Shoukry, Ehab F.. Numerical simulation for parametric study of a two -stroke compression ignition direct injection linear engine. Dissertation thesis, https://doi.org/10.33915/etd.1889