Back to search

West Virginia University

In-situ, near real-time acquisition of particle movement in rotating drum coating equipment

Abstract

dc:description.abstract

The uniformity of coating applied to large particles and tablets in rotating-drum coating devices is of significant interest to the Pharmaceutical Industry, especially when the coating contains active material or provides a sustained release barrier for drug transport in a functional coat. As tablets move around the coating drum, they periodically spend time at the surface of the avalanching layer and pass through the spray zone. During this time they receive amounts of coating solution proportional to both the time spent in the spray zone and the area exposed to the spray. The purpose of this research was to quantify parameters that characterize the movement of tablets through the spray region. The three parameters of greatest interest are (1) Circulation time (taucirc), defined as the time between successive particle sightings at the surface of the bed (2) Surface exposure time (tausurface), defined as the time that a particle spends at the surface of the bed within the spray zone during each pass (3) Surface area of the tablet projected toward the spray source (nozzle) during each pass through the spray zone (A tab).;In order to measure these parameters, a digital imaging system was developed and implemented to analyze images of the surface of the tumbling tablet bed. A single white tracer particle was introduced into a bed of black tablets. The tracer particle location and movement at the surface of the bed were analyzed using machine-vision software at a framing rate of 25 Hz. Data for tau circ and tausurface were compared on a qualitative level with previous studies, and similar decreasing trends have been observed in both sets of data with increasing drum speeds, drum loadings, and tablet size. Atab and surface velocities (Vy) were also estimated for the movement of tablets through the spray zone in the rotating drum. This study proves that machine vision software and digital imaging can be applied successfully to the acquisition of tablet movement on the surface of moving beds in rotating drum coating equipment. The independent variables drum speed, drum loading, and tablet size showed significant effects (p<0.05 ANOVA) on the dependent parameters, tau circ, tausurface, A tab and Vy. However baffles were not significant for the circulation times, but influenced the other parameters. Linear regression models were calculated for the dependent parameters assuming linear effects of all the independent variables.

Degree

thesis:*
Name thesis:degree_name
MS
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Chemical and Biomedical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Sandadi, Sandeepa

Subjects

dc:subject × 2

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
West Virginia University
Base URL
researchrepository.wvu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Sandadi, Sandeepa. In-situ, near real-time acquisition of particle movement in rotating drum coating equipment. Thesis thesis, https://doi.org/10.33915/etd.1897