Back to search

West Virginia University

CFRP repair of concrete beams aged by accelerated corrosion

Abstract

dc:description.abstract

In 2006, the Federal Highway Administration statistics showed that approximately one out of every 13 reinforced concrete bridges in the USA is structurally deficient. As infrastructure continues to age and deteriorate, there will not be sufficient funds to replace every deficient bridge. Therefore, effective and durable repair methods must be developed and implemented. In this research, an experimental study is presented to determine both the short- and long-term efficiencies of concrete retrofit with externally-bonded carbon fiber reinforced polymer (CFRP) fabrics. The primary objective is to determine effective concrete-repair and CFRP-retrofit approaches for rehabilitation of deteriorated concrete bridge girders, based on potential for long-term durability and costs. This two-part study consisted of 35 large-scale reinforced concrete beam specimens. Part I consisted of 14 beams with dimensions 6x8x108" and Part II consisted of 21 beams with dimensions 6x8x78". The beams were cast using chloride contaminated, low-strength and highly porous concrete; and they were aged using an induced electric current technique. Supplementary tests were also conducted on specimens and materials, including cylinder compression, rebound hammer, ultrasonic pulse velocity, FRP-concrete pull-off, FRP direct tension, and crack measurement.;In Part I two substrate repair methods were compared, epoxy crack-injection and complete replacement of concrete cover using polymer-modified concrete, and long-term durability was studied by inducing additional corrosion after repair. In Part II the performance of three unique FRP anchorage schemes were compared under both static and cyclic loading. Scheme 1 consisted of only flexural FRP without anchors, scheme 2 consisted of only two strategically placed anchors on each beam, and scheme 3 consisted of eight anchors evenly spaced along each span. In Part I, it was found that polymer concrete patch repair with corrosion inhibitors was by far the most durable substrate repair method, although all beams experienced further deterioration and loss in strength upon additional corrosion. In Part II, there were not significant differences in load capacity, deflection, or stiffness among the three anchoring schemes. The fatigue cyclic loading affected the failure mode of the beams. The accelerated corrosion process used in this research was adjusted using trial beam samples, and became successful and dependable in producing consistently artificially-aged specimens. This research provided further insight into future bridge rehabilitation and contributed to practical guidelines for concrete patch-repair and CFRP retrofit of concrete girders, to assure long-term adequate performance under environmental and mechanical loads.

Degree

thesis:*
Name thesis:degree_name
MS
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Civil and Environmental Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Parish, George C.

Subjects

dc:subject × 2

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
West Virginia University
Base URL
researchrepository.wvu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Parish, George C.. CFRP repair of concrete beams aged by accelerated corrosion. Thesis thesis, https://doi.org/10.33915/etd.1985