Back to search

West Virginia University

Aluminum nitride deposition/characterization & pMEMs/SAW device simulation/fabrication

Abstract

dc:description.abstract

Aluminum Nitride (AlN) is a promising material for piezoelectric MicroElectroMechanical Systems (pMEMS) and Surface Acoustic Wave (SAW) devices. AlN is a direct bandgap semiconductor possessing moderate piezoelectric coefficients, a high Curie temperature, and a high acoustic velocity. Potential applications of AlN thin film devices include high temperature pMEMS microvalves for use in Solid Oxide Fuel Cell (SOFC) flow control systems and high frequency/sensitivity SAW platforms for use in biosensors.;Since AlN is a robust material capable of operating at high temperatures and harsh environments, it can be used in settings where other widely used piezoelectrics such as Lead Zirconate Titanate (PZT) and Zinc Oxide (ZnO) fail. Piezoelectric beams are commonly used in MEMS and have many possible applications in smart sensor and actuator systems. In this work, the results of 3-dimensional Finite Element Analysis (FEA) of AlN homogeneous bimorphs (d31 mode) are shown. The coupled-field FEA simulations were performed using the commercially available software tool ANSYSRTM Academic Research, v.11.0. The effect of altering the contact geometry and position on the displacement, electric field, stress, and strain distributions for the static case is reported.;Surface acoustic wave devices have drawn increasing interest for use as highly sensitive sensors. Specifically, SAW platforms are being explored for chemical and biological sensor applications. Because AlN has one of the highest acoustic velocities of all the piezoelectric materials, high frequency (and thus highly sensitive) sensors are feasible. In this work, AlN SAW Rayleigh wave platforms were designed, fabricated, and tested. The insertion loss of the SAW platforms for two InterDigitated Transducers (IDTs) separation distances is also presented.

Degree

thesis:*
Name thesis:degree_name
MS
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Lane Department of Computer Science and Electrical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Pagan, Vincent Richard

Subjects

dc:subject × 2

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
West Virginia University
Base URL
researchrepository.wvu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Pagan, Vincent Richard. Aluminum nitride deposition/characterization & pMEMs/SAW device simulation/fabrication. Thesis thesis, https://doi.org/10.33915/etd.2012