Back to search

West Virginia University

Creep rupture and life prediction of polymer composites

Abstract

dc:description.abstract

Lack of long term performance data inhibits the widespread use of composites. The long-term response/performance of composite materials and structures exposed under service conditions (load, time, temperature, water, and others) must be established. Creep response under sustained load results in rupture but the time to rupture depends on environmental conditions. Creep rupture tests at higher fractions of ultimate failure load are often used to determine the time necessary to produce failure. Creep data are generated first in terms of deformation/strain versus time up to rupture for each test under a fraction of rupture load at a given temperature. Then the creep data from a large number of tests at various stresses and temperatures are used to develop log-log scale plots of applied stress versus time to failure and the data trend can then be used to extrapolate time to failure (stress rupture, life) under lower fractions of rupture loads for general design purposes. Such an approach is referred to as development of Master curves.;This work, at the Constructed Facilities Center of West Virginia University, focuses on characterization of creep rupture behavior of composite materials using both experimental and theoretical approaches. Composite materials with varying fiber orientations, thickness and manufacturing process were first evaluated under static (tension, compression and bending) loads for their mechanical properties under various environmental conditions. Their flexural creep behavior was also investigated under varying temperatures, moisture contents and loads. Static property data were then used to predict creep curves based on Time Temperature Superposition (TTS) Principle and Miyano's Accelerated Testing Methodology (ATM) approach (Miyano and Nakada, 2008). The predicted creep curves were finally validated through experimental creep data. In addition, Findley Power Law was employed to describe creep strain --time dependence. Our studies demonstrated that the predicted master curves are in good agreement with the experimental data and show great potential to estimate service life of the given composite, thus avoiding cumbersome and time consuming creep tests; and the Findley Power Law is capable of well representing creep strain responses at secondary creep phase for one of the composite materials studied.

Degree

thesis:*
Name thesis:degree_name
MS
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Chemical and Biomedical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Batra, Saurabh

Subjects

dc:subject × 3

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
West Virginia University
Base URL
researchrepository.wvu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Batra, Saurabh. Creep rupture and life prediction of polymer composites. Thesis thesis, https://doi.org/10.33915/etd.2035