Back to search

West Virginia University

The development of a dynamic scissor lift model

Abstract

dc:description.abstract

Tip-over/rollovers are the most frequent cause of fatalities associated with the use of scissor lifts. The objective of this study is to develop a dynamic model of a scissor lift to investigate tip-overs. A multibody dynamic model of a typical scissor lift was created using an advanced modeling platform---ADAMS RTM. This model was statically validated and dynamically calibrated based on experimental results from center of gravity, curb impact, and pothole depression tests. The dynamic responses of the scissor lift model were consistent with the experimental data. Once calibrated/validated, the model was used to simulate hazardous scenarios while varying the scissor lift's flexibility. Results of the simulations indicate that increased flexibility reduces the scissor lift's stability. This developed scissor lift model could be used to perform additional simulated conditions and for design optimization.

Degree

thesis:*
Name thesis:degree_name
MS
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Mechanical and Aerospace Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Hartsell, Jared J.

Subjects

dc:subject × 1

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
West Virginia University
Base URL
researchrepository.wvu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Hartsell, Jared J.. The development of a dynamic scissor lift model. Thesis thesis, https://doi.org/10.33915/etd.2149