Back to search

West Virginia University

Refined turbulence models for simulation of IC -engine cylinder flows

Abstract

dc:description.abstract

Turbulence and turbulent mixing are two of the most important factors that influence the efficiency and emissions level in internal combustion (IC) engines, particularly for diesel engines. This study has been performed with the premise to accurately predict in-cylinder turbulence by employing the large eddy simulation (LES) technique. In order to assess the turbulence scales involved correctly, a review of measured and computed scales relevant to IC engines is conducted. An assessment of these is made in comparison with the self-imposed scales of the engine itself. This assessment focuses on the influence of combustion, compression ratio, initial conditions and numerical mesh on predicted turbulence scales. It was found that the turbulence scales predicted by employing the commonly used k-epsilon turbulence model were in good qualitative agreement with experimental observations and could be used as a guide to determine the degree of resolution needed in LES.;To establish a base to improve existing Reynolds averaged Navier-Stokes (RANS) models, a comparative study of the commonly used RANS models applied to IC engines was conducted, using an experimental benchmark case, which is an isothermal, incompressible flow within a piston-cylinder arrangement motored without combustion. This study has lead to a new hybrid turbulence model, namely, the Smagorinsky based eddy viscosity (SEV) model, which is self-adjusting between an eddy viscosity model and subgrid-scale model, depending on the grid size, continuously from RANS to LES. It was tested against the above-mentioned experimental benchmark. The predicted velocity profiles and streamlines are in good agreement with experiments. The new model is a viable alternative to the k-epsilon model in predicting the mean flowfield in IC engines.;Furthermore, the relative importance of the turbulence generation mechanisms in IC engines has been studied using LES. First, the compression and expansion strokes of a piston-bowl configuration are thoroughly investigated using a fine 2-D axisymmetric grid and a 3-D grid. Next, the flow dynamics during the intake stroke has been examined using a full 3-D configuration of an engine with valves and a typical bowl. The results show that a significant portion of the inertial sub-range in the energy spectra can be resolved using a moderately fine grid with about 300,000 vertices. The calculated spectra display about the same energy content up to f ≈ 104 Hz, which is on the same order of maximum frequency resolved in typical experiments. It is shown via the LES technique, that significant turbulence is likely to be generated by a carefully designed bowl; and that the more energetic intake turbulence generated during the intake stroke decays rapidly during the compression stroke.

Degree

thesis:*
Name thesis:degree_name
PhD
Level thesis:degree_level
Dissertation
Discipline thesis:degree_discipline
Mechanical and Aerospace Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Yavuz, Ibrahim

Subjects

dc:subject × 2

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
West Virginia University
Base URL
researchrepository.wvu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Yavuz, Ibrahim. Refined turbulence models for simulation of IC -engine cylinder flows. Dissertation thesis, https://doi.org/10.33915/etd.2309