Back to search

West Virginia University

A parametric study of microcellular ABS foam production in the injection molding process

Abstract

dc:description.abstract

Polymer foaming is an emerging technology with many possible benefits. In this work, acrylonitrile-butadiene-styrene (ABS) polymer was studied, due to its excellent structural properties, such as impact and flexural/tensile properties. Much research has been undertaken in the field of foaming; however, little information is available with a system as complex as ABS polymer, due to its multi-phase nature. By injection molding ABS polymer along with chemical foaming agents (CFA), information about the effect of process and material variables on the resultant physical properties of the foams could be gained.;This research focused on the effect of parameters such as the mold and melt temperatures, the injection speed, as well as choice of foaming agent and rubber content of the ABS polymer. Varying degrees of correlation between variables were found, in disagreement with some previous findings. Material variables were found to exert much greater effects on the foams than did the process variables. The two different foaming agents employed were seen to produce significantly different cellular morphologies in foams, evidenced by SEM images. TEM images were used to confirm good rubber dispersion at all rubber contents, and regression equation showed excellent predictive capability to describe foam properties. The main finding is that polybutadiene rubber content is by far the most important predictor of the mechanical properties of ABS foam.

Degree

thesis:*
Name thesis:degree_name
MS
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Chemical and Biomedical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Finniss, Adam

Subjects

dc:subject × 2

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
West Virginia University
Base URL
researchrepository.wvu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Finniss, Adam. A parametric study of microcellular ABS foam production in the injection molding process. Thesis thesis, https://doi.org/10.33915/etd.3278