Back to search

West Virginia University

Strength Evaluation of Wood I-Joist with Sinusoidal Web

Abstract

dc:description.abstract

Wood I-joists are highly efficient, lightweight structural members used for long span applications. However, because of the high strength to stiffness ratio and thin--walled nature of the web, buckling or sudden loss of stability is a primary concern. Recently at West Virginia University a new structural wood composite panel has been developed using discarded veneer-mill residues. These panels were manufactured with a sinusoidal geometry and used as web material in I-joists. The profiling of the web is designed to increase the buckling capacity of the joists.;This thesis is focused on the evaluation of the strength, stiffness, and stability of this composite wood I-joist with sinusoidal web. Joists were manufactured at two different depths and also with flat webs for comparison. An evaluation of the web in compression, lateral-torsional buckling of the joists, the rotational stiffness through torsion testing, and an evaluation of the joists in four point bending are presented. Finite element analysis was performed along with the experimental evaluations. The finite element predictions are compared with the experimental results.

Degree

thesis:*
Name thesis:degree_name
MS
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Civil and Environmental Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • McGraw, Bradley

Subjects

dc:subject × 1

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
West Virginia University
Base URL
researchrepository.wvu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

McGraw, Bradley. Strength Evaluation of Wood I-Joist with Sinusoidal Web. Thesis thesis, https://doi.org/10.33915/etd.3365