Back to search

West Virginia University

The Nakahara Effect and Its Influence On Solution-Based 3D Printed Films

Abstract

dc:description.abstract

Motivated by the Nakahara Effect, the influence of altering printing parameters on fragmentation mechanism(s) of directly written titanium dioxide(TiO2) films is investigated. The Nakahara effect states that a long lasting memory can be introduced into a colloidal system prior to drying, affecting the type of crack pattern formed due to externally applied forces. TiO2 has important applications due to its interesting semiconducting properties, tunable band gap, photocatalytic properties, biocompatibility, and relative abundance. This is the reason it is used in this project as a model printing ink system. In this research, two deposition methods (i.e. direct-ink writing and doctor-blading) were compared in order to study the Nakahara Effect. In particular, the focus was to investigate the effects of film thickness, drying process used and the concentration of primary TiO2 particles in the aqueous ink on drying crack pattern formation. Crack patterns were observed during drying using an optical microscope, and crack lengths were measured using image analysis. Weibull statistics were used to study variability in crack patterns for the different deposition methods. The results suggest a distinction between the printed and doctor-bladed samples hence demonstrating the validity of the Nakahara Effect. They also provide new insights for the role of direct writing parameters for inducing distinct printing memory characteristics that may help to further understand and minimize crack formation during drying.

Degree

thesis:*
Name thesis:degree_name
MS
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Mechanical and Aerospace Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Kwakye-Ackah, Daryl

Subjects

dc:subject × 6

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
West Virginia University
Base URL
researchrepository.wvu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Kwakye-Ackah, Daryl. The Nakahara Effect and Its Influence On Solution-Based 3D Printed Films. Thesis thesis, https://doi.org/10.33915/etd.3722