West Virginia University
Shear stress estimates in the approach and bridge section by using various formula
Abstract
dc:description.abstractShear stress is the resistance force on top of the contact surface caused by moving flow and is one of the important variable in fluid mechanics. Thus, a lot of researches have been conducted to predict accurate value of shear stress. However, calculating shear stress with existing equations has several limitations because only gradually varied flow and/or uniform flow was considered in their studies. Therefore, direct applying those methods into complex flow type, such as around a bridge, to predict shear stress is questionable. Thus, laboratory experiments were carried out in a laboratory flume to attack the objective of this research which is “analyzing shear stress in the complex flow field”. The complex flow was made by construction of flow constriction structure in one side of flume, and the effect of three-dimensional flow around the constriction structure and back-water effect at the approach section of the structure were replicated in the flume. Water depth, velocity, and turbulence characteristics were measured by ADV and the measurements were used as input variables for various shear stress formulas. Total seven shear stress formulas are used in the analysis. As a result of this study, the appropriate shear stress formulas are suggested to calculate bed shear stress in the approach section and bed shear stress characteristic is shown with respect to flow constriction.
Degree
thesis:*- Name thesis:degree_name
- MS
- Level thesis:degree_level
- Thesis
- Discipline thesis:degree_discipline
- Civil and Environmental Engineering
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Lee, Jun Seon
Subjects
dc:subject × 8Identifiers
dc:identifier.*- Identifier
- https://researchrepository.wvu.edu/etd/3791