Back to search

West Virginia University

In Situ Measurement Of Fatigue Induced Crack Growth In Inconel 718 Using Direct Current Potential Drop Method

Abstract

dc:description.abstract

With recent advances in air breathable engines comes more extreme temperature environments that engine components must tolerate. During the design of these engines, it is necessary to understand how material fatigue failures occur at these new, higher operating temperatures. In providing understanding, the following fundamental study focuses on the statistical nature of crack jumps (changes in crack length over time) during fatigue in a polycrystalline nickel-based superalloy, Inconel 718 (IN718). In situ measurement of the crack length at several loading conditions were conducted using a direct current potential drop (DCPD) measurement method. Experimental data was collected at six different fatigue peak loads (R=0.15) for a statistically significant number of trials (n≥17). Calibration curves to relate electrical potential to crack length were derived from FEA and compared to analytical equations. It was determined that the mean normalized change in crack length over subsequent cycles increases with peak load. The standard deviation of the crack lengths remains constant for all loading cases. The signal-to-noise ratio was found to be best at or above a peak load of 1600N (29.65% of YS) for the given sample geometry. Results of the normalized change in crack length for a single case deviated from a Gaussian distribution. However, when all trials were considered at a single load, the distribution of the normalized change in crack length conformed to a Gaussian distribution. This lack of conformity for a single case can be explained by the history dependence of prior crack events on the crack growth for an individual specimen. This temporal information as the crack evolves, which is often overlooked in fatigue experiments, is hypothesized to be well suited for a machine learning approach that can better predict fatigue failures in superalloys.

Degree

thesis:*
Name thesis:degree_name
MS
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Mechanical and Aerospace Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Lindsay, Joel C

Subjects

dc:subject × 6

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
West Virginia University
Base URL
researchrepository.wvu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Lindsay, Joel C. In Situ Measurement Of Fatigue Induced Crack Growth In Inconel 718 Using Direct Current Potential Drop Method. Thesis thesis, https://doi.org/10.33915/etd.4050