Back to search

West Virginia University

Numerical modeling of soil-geosynthetic interaction

Abstract

dc:description.abstract

Geosynthetics are being used for a wide range of civil engineering applications such as reinforced earth fills, soft foundations etc. The use of geosynthetics can greatly increase the efficiency while reducing the cost of the project. The objective of this research is to study the pullout resistance of the geosynthetic and the effect of friction on the soil-geosynthetic interface. Finite element analysis was performed on different sizes of pullout box to match load-displacement results with that found during laboratory experiments. Friction coefficient was selected by trial and error method to match the load-displacement curves calculated from the laboratory experiments to that found from the finite element analysis. Models were made using three different soils; sand, silt, and clay at 0%, 10%, and 15% moisture content under normal pressures of 5 psi, 10 psi, and 15 psi.

Degree

thesis:*
Name thesis:degree_name
MS
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Civil and Environmental Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Pike, Joshua Dennis

Subjects

dc:subject × 1

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
West Virginia University
Base URL
researchrepository.wvu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Pike, Joshua Dennis. Numerical modeling of soil-geosynthetic interaction. Thesis thesis, https://doi.org/10.33915/etd.4327