Back to search

West Virginia University

Surfactants and digital alloys for strain relief in III-nitride distributed Bragg reflectors and related heterostructures via metal organic vapor phase epitaxy

Abstract

dc:description.abstract

III-Nitride based semiconductors have emerged as one of the promising materials for electronic and opto-electronic devices, including but not limited to, solid state emitters, photodetectors, and transistors. Despite commercial success, several issues ranging from material growth to device fabrication remain unresolved and continue to hinder the efficiency of these devices. One such issue includes strain management in III-Nitride heterostructures. The binary alloys in the (Al,In,Ga)N family are characterized by a large lattice and thermal mismatch which leads to defect formation and cracking within heterostructures. These defects are detrimental to device fabrication and operation. This work investigates growth based techniques to manage strain in III-Nitride heterostructures and thereby reduce defect formation.;In particular, this work focuses on the development surfactant assisted growth and digital alloys as strain relieving techniques to minimize cracking in Aluminum Gallium Nitride (AlxGa1- xN) alloys and related heterostructures via Metal Organic Vapor Phase Epitaxy. Indium has been investigated as a surfactant in the growth of AlN/GaN Distributed Bragg Reflectors (DBRs) and has been shown to reduce the cracking by a factor of two. Using variable temperature x-ray diffraction studies, indium has been shown to influence the thermal expansion coefficients of the AlN layers. The digital growth technique has been investigated as a viable method for achieving high quality, crack free AlxGa 1-xN films. Alloys with an AlN mole fraction ranging from 0.1 to 0.9 have been grown by adjusting the periodicity of these short period superlattice structures. High resolution x-ray diffraction has been used to determine the superlattice period along with the a- and c-lattice parameter of the structure. High aluminum content digital AlxGa1-xN alloys have been employed in DBRs for high reflectivity, >94%, crack-free structures. The characterization of these structures via scanning electron microscopy, atomic force microscopy, and x-ray diffraction is presented along with the results from the integration of the DBR with visible wavelength LEDs.

Degree

thesis:*
Name thesis:degree_name
PhD
Level thesis:degree_level
Dissertation
Discipline thesis:degree_discipline
Lane Department of Computer Science and Electrical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Rodak, Lee Ellen

Subjects

dc:subject × 1

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
West Virginia University
Base URL
researchrepository.wvu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Rodak, Lee Ellen. Surfactants and digital alloys for strain relief in III-nitride distributed Bragg reflectors and related heterostructures via metal organic vapor phase epitaxy. Dissertation thesis, https://doi.org/10.33915/etd.4775