Back to search

West Virginia University

Influence of the Lewis Number and Boundary Conditions on Finger Flame Acceleration

Abstract

dc:description.abstract

Influence of the Lewis Number and Boundary Conditions on Finger Flame Acceleration Mohammed AlKhabbaz One of the mechanisms of premixed flame acceleration in pipes is devoted to the following scenario: an initially hemispherical flame embryo, ignited at a closed end of a tube or a channel with one end open, at a tube/channel centerline, eventually acquires a convex, finger-like shape. This is accompanied by powerful flame acceleration, which lasts until the flame skirt contacts a sidewall of the tube/channel and is followed by flame deceleration and formation of a concave, "tulip" flame shape. While this phenomenon has been observed and studied extensively in the past, experimentally, computationally, and analytically, the previous theoretical and numerical studies employed a set of conventional simplifying assumptions such as equidiffusive burning and ideally-slip, adiabatic walls of the pipe, which are not the cases in the practical reality.;The present work reduces such a gap between the research and practice. Specifically, the impacts of the Lewis number (the thermal-to-mass diffusivity ratio) Le and of the various wall boundary conditions on finger flame acceleration is investigated by means of the computational simulations of the reacting flow equations, with a fully-compressible hydrodynamics, transport properties (thermal conduction, diffusion and viscosity), and an Arrhenius chemical kinetics. The simulation results include the monitoring and analysis of the major flame parameters such as the evolutions of the locus and velocity of the flame tip, the flame surface area and the burning rate.;It is shown that the Le > 1 flames are intrinsically thickened and thereby propagate slower than the equidiffusive (Le = 1) flames, though the difference is minor. In contrast, the Le < 1 flames propagate faster due to the onset of the diffusional-thermal instability. As for the wall conditions, various isothermal (cold/preheated) and mechanistic (slip/non-slip) boundaries are employed and compared. Overall, it appears that sidewalls provide a minor impact on finger flame acceleration, which is different for another acceleration mechanism where wall friction plays a greater role. The latter result can be explained by the fact that finger acceleration occurs far from the walls, i.e. along the centerline and before the flame skirt contacts the side-walls.

Degree

thesis:*
Name thesis:degree_name
MS
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Mechanical and Aerospace Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • AlKhabbaz, Mohammed Alawi
Contributors dc:contributor
  • V'yacheslav Akkerman
  • Hailin Li
  • Terence Musho

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
West Virginia University
Base URL
researchrepository.wvu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

AlKhabbaz, Mohammed Alawi. Influence of the Lewis Number and Boundary Conditions on Finger Flame Acceleration. Thesis thesis, https://doi.org/10.33915/etd.5072