Back to search

West Virginia University

Evaluation of primary stability in bovine ribs following a correction in placement depth

Abstract

dc:description.abstract

For an implant to be successfully loaded at the time of placement it must have a certain degree of initial stability. While many factors have been shown to influence primary stability, this study aims to examine the effect of positional change on implant stability. 18 Straumann dental implants (16 Standard plus SLA active 3.3mm RN implants, 1 Standard plus SLA 3.3 mm RN implant, and 1 SLActive 4.1 mm RC bone level implant) were placed into two bovine ribs. Implants were divided into two groups with nine in each group and were either backed out or advanced. The primary stability was assessed using an Osstell Mentor device following each quarter turn, until a full turn had been completed. Data was recorded and analyzed using linear regression and ANOVA. Results showed that after half a turn in either direction a significant change in primary stability was seen. Minor changes in implant position with conical implants did not seem to greatly influence initial implant stability. However, reversing a dental implant, even a quarter turn, will result in a measurable decrease in primary stability and caution should be used if immediate loading is to be considered.

Degree

thesis:*
Name thesis:degree_name
MS
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Orthodontics

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Bobbera, Matthew
Contributors dc:contributor
  • Matthew S Bryington
  • Harold Reed
  • Mark Richards

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
West Virginia University
Base URL
researchrepository.wvu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Bobbera, Matthew. Evaluation of primary stability in bovine ribs following a correction in placement depth. Thesis thesis, https://doi.org/10.33915/etd.5223